{"title":"Dial Calipers","description":null,"products":[{"product_id":"mitutoyo-505-671-dial-caliper-0-150mm","title":"Mitutoyo 505-671 | Dial Caliper | 0-150 mm, 0.02 mm","description":"\u003cp\u003e\u003cstrong\u003ePart No. 505-671 | Range 0–150 mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduct Overview\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 505-671 dial caliper measures outside, inside, depth and step dimensions across a 0–150 mm range with a clear, easy-to-read analogue dial. It requires no batteries or electronic display, making it ready for everyday dimensional inspection on the workshop floor.\u003c\/p\u003e\n\u003cp\u003eThe caliper is constructed from hardened stainless steel, with an ultra-smooth sliding mechanism and strong shock protection for dependable daily use. Titanium coating on the sliding surfaces helps improve durability, while the bright yellow dial with large characters makes measurements easier to read.\u003c\/p\u003e\n\u003cp\u003eStandard outside and inside jaws, a depth bar and step-measuring capability allow one instrument to handle a wide range of routine dimensional checks.\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 505-671 is suitable for machine shops, power and desalination plant maintenance teams, oil and gas service contractors, QC inspectors, machinists, fitters and industrial maintenance teams across Kuwait.\u003c\/p\u003e\n\u003cp\u003eTemperature can affect dimensional measurements. Steel expands by approximately 11.5 μm per metre per °C. At 150 mm, a 10 °C temperature difference can produce approximately 17.2 μm of dimensional change. For close-tolerance work, allow the Mitutoyo 505-671 and the workpiece to reach the same temperature before taking the final measurement.\u003c\/p\u003e\n\u003cp\u003eFor another 0–150 mm Mitutoyo dial caliper option, see the Mitutoyo 505-730.\u003c\/p\u003e\n\u003cp\u003eKey Benefits\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eOutside, inside, depth and step measurement in one instrument\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClear analogue dial for straightforward dimensional readings\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNo batteries or electronic display to maintain\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUltra-smooth sliding for comfortable everyday operation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eShock-protected dial mechanism for demanding workshop environments\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTitanium-coated sliding surfaces for improved durability\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHardened stainless steel construction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBright yellow dial with large, easy-to-read characters\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0–150 mm measuring range for general-purpose workshop inspection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMitutoyo 505 series design for everyday dimensional measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWho This Product Is Best For\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMachinists and fitters requiring a reliable everyday caliper\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQC inspectors who prefer an analogue dial reading\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMachine shop maintenance teams\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePower and desalination plant maintenance teams\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOil and gas service contractors\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFabrication and general industrial workshops\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTraining centres, technical institutes and apprentices\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBuyers looking for a battery-free alternative to digital calipers\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHow to Measure\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eClean the measuring jaws and workpiece before starting.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently and check the dial zero position.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOpen the jaws and position them around the feature being measured.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eKeep the caliper square and properly aligned with the measurement surface.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently without applying excessive force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the whole-unit value from the main scale and then read the corresponding value on the dial.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFor depth measurements, position the depth bar correctly against the reference surface.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWipe the measuring faces clean after use and store the caliper safely in its case.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat range does the Mitutoyo 505-671 dial caliper measure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures dimensions from 0 to 150 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Mitutoyo 505-671 measure inside and depth dimensions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It provides outside, inside, depth and step measurement capability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose a dial caliper over a digital caliper?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-671 requires no batteries and has no electronic display. Its analogue dial provides a direct mechanical reading for routine dimensional checks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I read the dial on the Mitutoyo 505-671?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead the whole-unit measurement from the main beam scale and then add the corresponding dial reading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Mitutoyo 505-671 suitable for industrial maintenance?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIts 0–150 mm range and outside, inside, depth and step measurement capability make it suitable for routine dimensional checks in machine shops, maintenance environments and industrial service applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I choose between the Mitutoyo 505-671 and 505-730?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth models provide a 0–150 mm measuring range. Selection should be based on the specific measurement requirements, dial resolution and application for which the caliper will be used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Mitutoyo 505-671 be recalibrated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Periodic calibration through a qualified calibration service can help maintain measurement traceability where required by the user's quality system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I store and care for the 505-671?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWipe the measuring faces clean after use, store the instrument in its case away from direct sunlight and coolant, and avoid dropping or impacting it. Check the zero position regularly and arrange periodic calibration when traceability is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do temperature changes affect measurements with the 505-671?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSteel expands and contracts with temperature. At a 150 mm length, a 10 °C temperature difference can produce approximately 17.2 μm of dimensional change. For close-tolerance measurements, allow the workpiece and caliper to reach the same temperature before measuring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I order the Mitutoyo 505-671 dial caliper in Kuwait?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor pricing and availability, call or WhatsApp \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e with the model number and required quantity. General Tech Services LLC can confirm the current quotation and availability for Kuwait.\u003c\/p\u003e\n\u003cp\u003eRequest Pricing \u0026amp; Availability\u003c\/p\u003e\n\u003cp\u003eReady to order the Mitutoyo 505-671? Call or WhatsApp \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e for pricing and availability in Kuwait.\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42165606809713,"sku":"505-671","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-dial-calipers-default-title-mitutoyo-505-671-dial-caliper-0-150mm-25387039490161.jpg?v=1761753659"},{"product_id":"mitutoyo-505-732-dial-caliper-0-150mm-0-01mm-1mm-rev","title":"Mitutoyo 505-732, Dial Caliper 0-150mm, 0,01mm, 1mm\/rev","description":"\u003cp\u003e\u003cstrong\u003ePart No. 505-732 | Range 0–150 mm | Graduation 0.01 mm | 1 mm\/rev\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduct Overview\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 505-732 dial caliper measures outside, inside, depth and step dimensions across a 0–150 mm range. Its clear analogue dial provides a 0.01 mm graduation with 1 mm per revolution, making it suitable for routine dimensional inspection without batteries or an electronic display.\u003c\/p\u003e\n\u003cp\u003eThe caliper is constructed from hardened stainless steel, with smooth sliding action and shock protection designed for regular workshop use. Titanium-coated sliding surfaces improve durability, while the bright yellow dial with large characters supports easy reading on the shop floor.\u003c\/p\u003e\n\u003cp\u003eStandard outside and inside jaws, a depth bar and step measurement capability allow one instrument to handle a wide range of everyday dimensional checks. It is suitable for machinists, QC inspectors, maintenance teams, training centres and industrial workshops across Kuwait.\u003c\/p\u003e\n\u003cp\u003eTemperature can affect dimensional measurements. Steel expands by approximately 11.5 μm per metre for every 1 °C change. For a 150 mm workpiece, a 10 °C temperature difference can therefore produce roughly 17.2 μm of dimensional change. Allow the workpiece and Mitutoyo 505-732 to reach the same temperature before taking a final precision reading.\u003c\/p\u003e\n\u003cp\u003eKey Benefits\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eClear analogue dial reading with no battery required\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOutside, inside, depth and step measurement in one caliper\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSmooth sliding action with shock-protected dial mechanism\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0.01 mm graduation for fine dimensional readings\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1 mm per revolution for straightforward dial interpretation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHardened stainless steel construction for workshop durability\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTitanium-coated sliding surfaces for improved wear resistance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBright yellow dial with large characters for easy reading\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMitutoyo 505 series design for everyday dimensional inspection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWho This Product Is Best For\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMachinists and fitters requiring an everyday mechanical caliper\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQC inspectors who prefer analogue measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMaintenance teams in machine shops and industrial facilities\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOil and gas maintenance and refinery service teams\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCNC machine shops performing routine dimensional checks\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTraining centres and apprentices learning mechanical measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBuyers requiring a non-electronic caliper for demanding workshop environments\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHow to Use the Dial Caliper\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eClean the measuring faces and close the jaws gently.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCheck the zero position of the dial before measurement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOpen the jaws and position them around the feature being measured.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eKeep the caliper square and properly aligned with the workpiece.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently without excessive measuring force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the whole-unit measurement from the main scale and the fractional measurement from the dial.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUse the appropriate jaws or depth bar for inside, depth and step measurements.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat range does the Mitutoyo 505-732 measure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures dimensions from 0–150 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the graduation of the 505-732?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe dial caliper has a 0.01 mm graduation and a dial movement of 1 mm per revolution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure inside and depth dimensions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 505-732 supports outside, inside, depth and step measurements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose a dial caliper instead of a digital caliper?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-732 uses an analogue mechanism and does not require batteries or an electronic display. This can be useful where a mechanical measuring tool is preferred for routine workshop inspection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I read the dial?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead the whole-unit dimension from the main beam scale, then add the fractional measurement shown on the dial. The dial provides 0.01 mm graduations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat should I do if my required measurement is outside the 0–150 mm range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose a caliper whose measuring range covers the required dimension. The 505-732 is designed for measurements from 0–150 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Mitutoyo 505-732 be recalibrated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Periodic calibration through an ISO\/IEC 17025-accredited calibration service can help maintain measurement traceability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I store and care for the caliper?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClean the measuring surfaces after use, protect the instrument from coolant and direct sunlight, avoid impacts or drops, and check the zero position regularly. Periodic calibration should be scheduled according to your quality requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I order the Mitutoyo 505-732 in Kuwait?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePricing is quote-based. Call or WhatsApp \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e with the model number and required quantity, and General Tech Services LLC will confirm pricing and availability.\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170139574385,"sku":"505-732","price":370.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-dial-calipers-default-title-mitutoyo-505-732-dial-caliper-0-150mm-0-01mm-1mm-rev-25381781602417.jpg?v=1761752268"},{"product_id":"mitutoyo-505-730-dial-caliper-0-150-mm-graduation-0-02-mm-2-mm-rev","title":"Mitutoyo 505-730 | Dial Caliper | 0-150 mm, 0.02 mm, 2 mm\/rev","description":"\u003cp\u003e\u003cstrong\u003ePart No. 505-730 | Range 0–150 mm | Graduation 0.02 mm | 2 mm\/rev\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduct Overview\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 505-730 dial caliper measures outside, inside, depth and step dimensions across a 0–150 mm range with a clear analogue dial and 0.02 mm graduation. Unlike digital calipers, it requires no battery or electronic display, making it ready for everyday workshop use.\u003c\/p\u003e\n\u003cp\u003eThe caliper is constructed from hardened stainless steel and features ultra-smooth sliding, shock protection and titanium-coated sliding surfaces for durability in demanding working environments. Its bright yellow dial uses large characters for easy reading.\u003c\/p\u003e\n\u003cp\u003eStandard outside and inside jaws, a depth bar and step-measuring capability allow one instrument to handle common dimensional inspection tasks. The dial provides 0.02 mm graduation with 2 mm per revolution.\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 505-730 is suitable for machinists, QC inspectors, maintenance teams, CNC machine shops, oil and gas workshops, refinery and petrochemical shutdown work, training centres and other industrial applications across Kuwait.\u003c\/p\u003e\n\u003cp\u003eTemperature can affect measurements. Steel expands by approximately 11.5 μm per metre per °C. For a 150 mm steel part, a 10 °C temperature difference can produce approximately 17.2 μm of dimensional change. For critical measurements, allow both the part and caliper to reach the same temperature before taking the final reading.\u003c\/p\u003e\n\u003cp\u003eKey Benefits\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eClear analogue dial reading with no batteries or electronic display\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOutside, inside, depth and step measurement in one instrument\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0.02 mm graduation for detailed dimensional checks\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e2 mm dial travel per revolution\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUltra-smooth sliding for comfortable everyday operation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eShock-protected dial mechanism for demanding workshop use\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTitanium-coated sliding surfaces for improved durability\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHardened stainless steel construction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBright yellow dial with large, easy-to-read characters\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBattery-free operation for dependable workshop availability\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMitutoyo 505 series design for general-purpose dimensional inspection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWho This Product Is Best For\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMachinists and fitters requiring a reliable everyday caliper\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQC inspectors who prefer an analogue dial display\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMaintenance teams working in machine shops and industrial facilities\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCNC machining and fabrication workshops\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOil and gas maintenance teams\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRefinery and petrochemical shutdown crews\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTraining centres, technical institutes and apprentices\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBuyers looking for a battery-free alternative to digital calipers\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHow to Measure\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eClean the measuring jaws and the workpiece before measurement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently and confirm the dial is correctly zeroed.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOpen the jaws and position them around the feature being measured.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eKeep the caliper square and aligned with the measured surface.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently without applying excessive force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the whole measurement from the main scale and the remaining value from the dial.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFor depth measurements, position the depth bar correctly and keep the caliper square to the reference surface.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWipe the measuring surfaces clean after use and store the caliper away from direct sunlight, coolant and impact.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat range does the Mitutoyo 505-730 dial caliper measure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures dimensions from 0 to 150 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Mitutoyo 505-730 measure inside and depth dimensions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It provides outside, inside, depth and step measurement capability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the graduation of the 505-730?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe graduation is 0.02 mm, with 2 mm of dial travel per revolution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose a dial caliper instead of a digital caliper?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-730 requires no batteries and has no electronic display. Its analogue dial provides a direct mechanical reading for everyday workshop measurements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I read the dial on the Mitutoyo 505-730?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead the whole-unit measurement from the main beam scale, then add the corresponding dial reading. The model has 0.02 mm graduation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I choose between Mitutoyo caliper models with a 0–150 mm range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose the model according to the required graduation, jaw configuration and application. The 505-730 provides a 0–150 mm range with 0.02 mm graduation and 2 mm per revolution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Mitutoyo 505-730 be recalibrated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Periodic calibration through a qualified calibration service can be used to maintain measurement traceability, particularly where quality-system requirements apply.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I store and care for the 505-730?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClean the measuring surfaces after use, keep the caliper away from direct sunlight and coolant, avoid dropping or impacting it, and check the zero position regularly. Periodic calibration is recommended for applications requiring traceable measurements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I order the Mitutoyo 505-730 in Kuwait?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor pricing and availability, call or WhatsApp \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e with the model number and required quantity. General Tech Services LLC can confirm the current quotation and availability for Kuwait.\u003c\/p\u003e\n\u003cp\u003eRequest Pricing \u0026amp; Availability\u003c\/p\u003e\n\u003cp\u003eReady to order the Mitutoyo 505-730? Call or WhatsApp \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e for pricing and availability in Kuwait.\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170284408945,"sku":"505-730","price":350.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-dial-calipers-default-title-mitutoyo-505-730-dial-caliper-0-150-mm-graduation-0-02-mm-2-mm-rev-25853387571313.webp?v=1761749898"},{"product_id":"mitutoyo-505-731-dial-calipers-0-200-mm-graduation-0-02-mm-2-mm-rev","title":"Mitutoyo 505-731 | Dial Caliper | 0-200 mm, 0.02 mm, 2 mm\/rev","description":"\u003cp\u003e\u003cstrong\u003ePart No. 505-731 | Range 0–200 mm | Graduation 0.02 mm | 2 mm\/rev\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduct Overview\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 505-731 dial caliper measures outside, inside, depth and step dimensions across a 0–200 mm range. Its easy-to-read analogue dial provides 0.02 mm graduation with 2 mm per revolution, giving clear dimensional readings without batteries or an electronic display.\u003c\/p\u003e\n\u003cp\u003eConstructed from hardened stainless steel, the caliper features ultra-smooth sliding and strong shock protection for dependable daily workshop use. Titanium coating on the sliding surfaces enhances durability, while the bright yellow dial with large characters makes readings easy to see.\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 505-731 is suitable for machine shops, power and desalination plant maintenance teams, oil and gas service contractors, fabrication workshops and QC inspection applications across Kuwait.\u003c\/p\u003e\n\u003cp\u003eTemperature can affect dimensional measurements. Steel expands by approximately 11.5 μm per metre per °C. At 200 mm, a 10 °C temperature difference can change the measured length by approximately 23.0 μm. For close-tolerance work, allow the workpiece and caliper to reach the same temperature before taking the final measurement.\u003c\/p\u003e\n\u003cp\u003eKey Benefits\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eOutside, inside, depth and step measurement in one tool\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0–200 mm measuring range for everyday metric measurements\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0.02 mm graduation for clear dimensional readings\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e2 mm per revolution dial configuration\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUltra-smooth sliding for controlled operation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eStrong shock protection for demanding workshop use\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTitanium-coated sliding surfaces for enhanced durability\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHardened stainless steel construction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBright yellow dial with large, easy-to-read characters\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNo batteries or electronic display required\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMitutoyo 505 series design for everyday dimensional inspection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWho This Product Is Best For\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMachinists and fitters requiring a reliable everyday metric caliper\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQC inspectors who prefer an analogue dial\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMachine shop maintenance teams\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePower and desalination plant maintenance teams\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOil and gas service contractors\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFabrication and machining workshops\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTraining centres and apprentices learning dimensional measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBuyers replacing digital calipers with a battery-free analogue instrument\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHow to Measure\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eClean the jaws and measuring surfaces before use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws and check the dial zero.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOpen the jaws and position them gently around the feature being measured.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eKeep the caliper square and properly aligned with the workpiece.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently without applying excessive measuring force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the whole-unit value from the main beam scale and add the dial reading at 0.02 mm per graduation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUse the depth bar or step surfaces when measuring depth or step dimensions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClean the instrument after use and store it safely.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat range does the Mitutoyo 505-731 dial caliper measure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures from 0 to 200 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the 505-731 measure inside and depth dimensions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It measures outside, inside, depth and step dimensions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the graduation of the Mitutoyo 505-731?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe graduation is 0.02 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 2 mm per revolution mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe dial completes one full revolution for 2 mm of movement, with individual graduations corresponding to 0.02 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose a dial caliper over a digital caliper?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-731 uses an analogue dial and does not require batteries or an electronic display. This provides straightforward measurement for routine workshop applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I read the Mitutoyo 505-731 dial?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead the whole-unit value from the main beam scale and then add the dial reading. Each dial graduation represents 0.02 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Mitutoyo model should I choose for measurements up to 200 mm?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-731 provides a 0–200 mm range. Other Mitutoyo 505-series models, including the 505-682 and 505-733, can be compared according to their specific measurement and configuration requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Mitutoyo 505-731 be recalibrated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Periodic calibration through an appropriate calibration service can verify measurement performance and maintain traceability where required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I store and care for the 505-731?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWipe the measuring faces clean after use, keep the instrument away from direct sunlight and coolant during storage, avoid dropping it, and check the zero regularly. Schedule periodic calibration according to your quality requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I order the Mitutoyo 505-731 in Kuwait?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor pricing and availability, call or WhatsApp General Tech Services LLC at \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e with the model number and required quantity.\u003c\/p\u003e\n\u003cp\u003eRequest Pricing \u0026amp; Availability\u003c\/p\u003e\n\u003cp\u003eContact General Tech Services LLC for current pricing and availability of the Mitutoyo 505-731 dial caliper in Kuwait.\u003c\/p\u003e\n\u003cp\u003eCall or WhatsApp \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170284441713,"sku":"505-731","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-dial-calipers-default-title-mitutoyo-505-731-dial-calipers-0-200-mm-graduation-0-02-mm-2-mm-rev-25382151192689.png?v=1761749898"},{"product_id":"mitutoyo-505-733-dial-caliper-0-200-mm-graduation-0-01-mm-1-mm-rev","title":"Mitutoyo 505-733 | Dial Caliper | 0-200 mm, 0.01 mm, 1 mm\/rev","description":"\u003cp\u003e\u003cstrong\u003ePart No. 505-733 | Range 0–200 mm | Graduation 0.01 mm | 1 mm\/rev\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduct Overview\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 505-733 dial caliper measures outside, inside, depth and step dimensions across a 0–200 mm range. Its easy-to-read analogue dial provides 0.01 mm graduation with 1 mm per revolution, giving clear dimensional readings without batteries or an electronic display.\u003c\/p\u003e\n\u003cp\u003eConstructed from hardened stainless steel, the caliper features ultra-smooth sliding and strong shock protection for dependable daily workshop use. Titanium coating on the sliding surfaces enhances durability, while the bright yellow dial with large characters makes readings easy to see.\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 505-733 is suitable for oil and gas maintenance workshops, refinery and petrochemical shutdown teams, CNC machine shops, fabrication environments and QC inspection applications across Kuwait.\u003c\/p\u003e\n\u003cp\u003eTemperature can affect dimensional measurements. Steel expands by approximately 11.5 μm per metre per °C. At 200 mm, a 10 °C temperature difference can change the measured length by approximately 23.0 μm. For close-tolerance work, allow the workpiece and caliper to reach the same temperature before taking the final measurement.\u003c\/p\u003e\n\u003cp\u003eKey Benefits\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eOutside, inside, depth and step measurement in one tool\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0–200 mm measuring range for everyday metric measurements\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0.01 mm graduation for clear dimensional readings\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1 mm per revolution dial configuration\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUltra-smooth sliding for controlled operation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eStrong shock protection for demanding workshop use\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTitanium-coated sliding surfaces for enhanced durability\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHardened stainless steel construction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBright yellow dial with large, easy-to-read characters\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNo batteries or electronic display required\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMitutoyo 505 series design for everyday dimensional inspection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWho This Product Is Best For\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMachinists and fitters requiring a reliable everyday metric caliper\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQC inspectors who prefer an analogue dial\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOil and gas maintenance workshops\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRefinery and petrochemical shutdown teams\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCNC machine shops and fabrication workshops\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTraining centres and apprentices learning dimensional measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBuyers replacing digital calipers with a battery-free analogue instrument\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHow to Measure\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eClean the jaws and measuring surfaces before use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws and check the dial zero.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOpen the jaws and position them gently around the feature being measured.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eKeep the caliper square and properly aligned with the workpiece.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently without applying excessive measuring force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the whole-unit value from the main beam scale and add the dial reading at 0.01 mm per graduation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUse the depth bar or step surfaces when measuring depth or step dimensions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClean the instrument after use and store it safely.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat range does the Mitutoyo 505-733 dial caliper measure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures from 0 to 200 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the 505-733 measure inside and depth dimensions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It measures outside, inside, depth and step dimensions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the graduation of the Mitutoyo 505-733?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe graduation is 0.01 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 1 mm per revolution mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe dial completes one full revolution for 1 mm of movement, with individual graduations corresponding to 0.01 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose a dial caliper over a digital caliper?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-733 uses an analogue dial and does not require batteries or an electronic display. This provides straightforward measurement for routine workshop applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I read the Mitutoyo 505-733 dial?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead the whole-unit value from the main beam scale and then add the dial reading. Each dial graduation represents 0.01 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Mitutoyo model should I choose for measurements up to 200 mm?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-733 provides a 0–200 mm range. Other Mitutoyo 505-series models can be compared according to their specific jaw, dial and measurement requirements. The 505-745 provides a longer 0–300 mm range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Mitutoyo 505-733 be recalibrated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Periodic calibration through an appropriate calibration service can verify measurement performance and maintain traceability where required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I store and care for the 505-733?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWipe the measuring faces clean after use, keep the instrument away from direct sunlight and coolant during storage, avoid dropping it, and check the zero regularly. Schedule periodic calibration according to your quality requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I order the Mitutoyo 505-733 in Kuwait?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor pricing and availability, call or WhatsApp General Tech Services LLC at \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e with the model number and required quantity.\u003c\/p\u003e\n\u003cp\u003eRequest Pricing \u0026amp; Availability\u003c\/p\u003e\n\u003cp\u003eContact General Tech Services LLC for current pricing and availability of the Mitutoyo 505-733 dial caliper in Kuwait.\u003c\/p\u003e\n\u003cp\u003eCall or WhatsApp \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e to request a quote.\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170284507249,"sku":"505-733","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-dial-calipers-default-title-mitutoyo-505-733-dial-caliper-0-200-mm-graduation-0-01-mm-1-mm-rev-25382151290993.png?v=1761749898"},{"product_id":"mitutoyo-505-745-dial-caliper-0-300-mm-graduation-0-02-mm-2-mm-rev","title":"Mitutoyo 505-745 | Dial Caliper | 0-300 mm, 0.02 mm, 2 mm\/rev","description":"\u003cp\u003e\u003cstrong\u003ePart No. 505-745 | Range 0–300 mm | Graduation 0.02 mm | 2 mm\/rev\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduct Overview\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 505-745 dial caliper measures outside, inside, depth and step dimensions across a 0–300 mm range. Its easy-to-read analogue dial provides 0.02 mm graduation with 2 mm per revolution, giving clear dimensional readings without batteries or an electronic display.\u003c\/p\u003e\n\u003cp\u003eConstructed from hardened stainless steel, the caliper features ultra-smooth sliding and strong shock protection for dependable daily workshop use. The bright yellow dial with large characters makes readings easy to see, while the standard outside and inside jaws, depth bar and step capability allow one instrument to handle a wide range of routine measurement tasks.\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 505-745 is suitable for QC inspectors, calibration environments, fabrication and machining workshops, and maintenance teams supporting Kuwait's oil, gas and utilities sectors.\u003c\/p\u003e\n\u003cp\u003eTemperature can affect dimensional measurements. Steel expands by approximately 11.5 μm per metre per °C. At 300 mm, a 10 °C temperature difference can change the measured length by approximately 34.5 μm. For close-tolerance work, allow the workpiece and caliper to reach the same temperature before taking the final measurement.\u003c\/p\u003e\n\u003cp\u003eKey Benefits\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eOutside, inside, depth and step measurement in one tool\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0–300 mm measuring range for larger everyday measurements\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0.02 mm graduation for clear dimensional readings\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e2 mm per revolution dial configuration\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUltra-smooth sliding for controlled operation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eStrong shock protection for demanding workshop use\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHardened stainless steel construction for durability\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBright yellow dial with large, easy-to-read characters\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNo batteries or electronic display required\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMitutoyo 505 series design for everyday dimensional inspection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWho This Product Is Best For\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMachinists and fitters requiring a reliable everyday metric caliper\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQC inspectors who prefer an analogue dial\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCalibration and dimensional inspection environments\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOil and gas maintenance workshops\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFabrication and machining workshops\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePower and utilities maintenance teams\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTraining centres and apprentices learning dimensional measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBuyers replacing digital calipers with a battery-free analogue instrument\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHow to Measure\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eClean the jaws and measuring surfaces before use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws and check the dial zero.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOpen the jaws and position them gently around the feature being measured.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eKeep the caliper square and properly aligned with the workpiece.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently without applying excessive measuring force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the whole-unit value from the main beam scale and add the dial reading at 0.02 mm per graduation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUse the depth bar or step surfaces when measuring depth or step dimensions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClean the instrument after use and store it safely.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat range does the Mitutoyo 505-745 dial caliper measure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures from 0 to 300 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the 505-745 measure inside and depth dimensions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It measures outside, inside, depth and step dimensions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the graduation of the Mitutoyo 505-745?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe graduation is 0.02 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 2 mm per revolution mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe dial completes one full revolution for 2 mm of movement, with individual graduations corresponding to 0.02 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose a dial caliper over a digital caliper?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-745 uses an analogue dial and does not require batteries or an electronic display. This provides straightforward measurement for routine workshop applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I read the Mitutoyo 505-745 dial?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead the whole-unit value from the main beam scale and then add the dial reading. Each dial graduation represents 0.02 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the 505-745 suitable for larger metric measurements?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Its 0–300 mm range provides additional capacity for larger components compared with shorter-range metric calipers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Mitutoyo model should I choose for measurements up to 200 mm?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-745 provides a 0–300 mm range. For applications that fall within a shorter measurement range, the Mitutoyo 505-733 with a 0–200 mm range can be considered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Mitutoyo 505-745 be recalibrated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Periodic calibration through an appropriate calibration service can verify measurement performance and maintain traceability where required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I store and care for the 505-745?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWipe the measuring faces clean after use, keep the instrument away from direct sunlight and coolant during storage, avoid dropping it, and check the zero regularly. Schedule periodic calibration according to your quality requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I order the Mitutoyo 505-745 in Kuwait?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor pricing and availability, call or WhatsApp General Tech Services LLC at \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e with the model number and required quantity.\u003c\/p\u003e\n\u003cp\u003eRequest Pricing \u0026amp; Availability\u003c\/p\u003e\n\u003cp\u003eContact General Tech Services LLC for current pricing and availability of the Mitutoyo 505-745 dial caliper in Kuwait.\u003c\/p\u003e\n\u003cp\u003eCall or WhatsApp \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e to request a quote.\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170284540017,"sku":"505-745","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/Mitutoyo505-745.jpg?v=1761776019"},{"product_id":"mitutoyo-505-742-dial-caliper-0-6-graduation-001-1-rev","title":"Mitutoyo 505-742 | Dial Caliper | 0-6 in, 0.001 in, 0.1 in\/rev","description":"\u003cp\u003e\u003cstrong\u003ePart No. 505-742 | Range 0\"–6\" (0–152.4 mm) | Graduation 0.001\" | 0.1\"\/rev\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduct Overview\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 505-742 dial caliper measures outside, inside, depth and step dimensions across a 0\"–6\" (0–152.4 mm) range. Its easy-to-read analogue dial provides 0.001\" graduation with 0.1\" per revolution, giving clear dimensional readings without batteries or an electronic display.\u003c\/p\u003e\n\u003cp\u003eBuilt from hardened stainless steel, the caliper features ultra-smooth sliding and strong shock protection for dependable daily workshop use. Titanium coating on the sliding surfaces enhances durability, while the bright yellow dial with large characters makes readings easy to see.\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 505-742 is suitable for QC inspectors, calibration environments, fabrication and machining workshops, and maintenance teams supporting Kuwait's oil, gas and utilities sectors.\u003c\/p\u003e\n\u003cp\u003eTemperature can affect dimensional measurements. Steel expands by approximately 11.5 μm per metre per °C. At 152.4 mm, a 10 °C temperature difference can change the measured length by approximately 17.5 μm. For close-tolerance work, allow the workpiece and caliper to reach the same temperature before taking the final measurement.\u003c\/p\u003e\n\u003cp\u003eKey Benefits\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eOutside, inside, depth and step measurement in one tool\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0\"–6\" (0–152.4 mm) measuring range\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0.001\" graduation for clear dimensional readings\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0.1\" per revolution dial configuration\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUltra-smooth sliding for controlled operation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eStrong shock protection for demanding workshop use\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTitanium-coated sliding surfaces for enhanced durability\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHardened stainless steel construction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBright yellow dial with large, easy-to-read characters\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNo batteries or electronic display required\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMitutoyo 505 series design for everyday dimensional inspection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWho This Product Is Best For\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMachinists and fitters requiring a reliable everyday caliper\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQC inspectors who prefer an analogue dial\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCalibration and dimensional inspection environments\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOil and gas maintenance workshops\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFabrication and machining workshops\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePower and utilities maintenance teams\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTraining centres and apprentices learning dimensional measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBuyers replacing digital calipers with a battery-free analogue instrument\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHow to Measure\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eClean the jaws and measuring surfaces before use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws and check the dial zero.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOpen the jaws and position them gently around the feature being measured.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eKeep the caliper square and properly aligned with the workpiece.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently without applying excessive measuring force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the whole-unit value from the main beam scale and add the dial reading at 0.001\" per graduation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUse the depth bar or step surfaces when measuring depth or step dimensions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClean the instrument after use and store it safely.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat range does the Mitutoyo 505-742 dial caliper measure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures from 0\" to 6\" (0–152.4 mm).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the 505-742 measure inside and depth dimensions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It measures outside, inside, depth and step dimensions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the graduation of the Mitutoyo 505-742?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe graduation is 0.001\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 0.1\" per revolution mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe dial completes one full revolution for 0.1\" of movement, with individual graduations corresponding to 0.001\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose a dial caliper over a digital caliper?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-742 uses an analogue dial and does not require batteries or an electronic display. This provides straightforward measurement for routine workshop applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I read the Mitutoyo 505-742 dial?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead the whole-unit measurement from the main beam scale and then add the dial reading. Each dial graduation represents 0.001\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Mitutoyo model should I choose for measurements up to 6\"?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-742 provides a 0\"–6\" (0–152.4 mm) range. Other 505-series 6\" models, such as the 505-738 or 505-742J, can be compared according to their specific jaw and configuration requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Mitutoyo 505-742 be recalibrated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Periodic calibration through an appropriate calibration service can verify measurement performance and maintain traceability where required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I store and care for the 505-742?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWipe the measuring faces clean after use, keep the instrument away from direct sunlight and coolant during storage, avoid dropping it, and check the zero regularly. Schedule periodic calibration according to your quality requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I order the Mitutoyo 505-742 in Kuwait?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor pricing and availability, call or WhatsApp General Tech Services LLC at \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e with the model number and required quantity.\u003c\/p\u003e\n\u003cp\u003eRequest Pricing \u0026amp; Availability\u003c\/p\u003e\n\u003cp\u003eContact General Tech Services LLC for current pricing and availability of the Mitutoyo 505-742 dial caliper in Kuwait.\u003c\/p\u003e\n\u003cp\u003eCall or WhatsApp \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e to request a quote.\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170284605553,"sku":"505-742","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-dial-calipers-default-title-mitutoyo-505-742-dial-caliper-0-6-graduation-001-1-rev-25382151487601.png?v=1761749894"},{"product_id":"mitutoyo-505-743-dial-caliper-0-8-graduation-001-1-rev","title":"Mitutoyo 505-743 | Dial Caliper | 0-8 in, 0.001 in, 0.1 in\/rev","description":"\u003cp\u003e\u003cstrong\u003ePart No. 505-743 | Range 0\"–8\" (0–203.2 mm) | Graduation 0.001\" | 0.1\"\/rev\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduct Overview\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 505-743 dial caliper measures outside, inside, depth and step dimensions across a 0\"–8\" (0–203.2 mm) range. Its easy-to-read analogue dial provides 0.001\" graduation with 0.1\" per revolution, giving clear readings without batteries or an electronic display.\u003c\/p\u003e\n\u003cp\u003eConstructed from hardened stainless steel, the caliper features ultra-smooth sliding and strong shock protection for dependable daily use. Titanium coating on the sliding surfaces enhances durability, while the bright yellow dial with large characters makes readings easy to see.\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 505-743 is well suited to oil and gas maintenance workshops, refinery and petrochemical shutdown teams, CNC machine shops, fabrication environments and QC inspection applications across Kuwait.\u003c\/p\u003e\n\u003cp\u003eTemperature can affect dimensional measurements. Steel expands by approximately 11.5 μm per metre per °C. At 203.2 mm, a 10 °C temperature difference can change the measured length by approximately 23.4 μm. For close-tolerance work, allow both the workpiece and caliper to reach the same temperature before taking the final measurement.\u003c\/p\u003e\n\u003cp\u003eKey Benefits\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eOutside, inside, depth and step measurement in one tool\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0\"–8\" (0–203.2 mm) measuring range\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0.001\" graduation for clear dimensional readings\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0.1\" per revolution dial configuration\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUltra-smooth sliding for controlled operation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eStrong shock protection for demanding workshop use\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTitanium-coated sliding surfaces for enhanced durability\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHardened stainless steel construction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBright yellow dial with large, easy-to-read characters\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNo batteries or electronic display required\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMitutoyo 505 series design for everyday dimensional inspection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWho This Product Is Best For\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMachinists and fitters requiring a reliable everyday caliper\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQC inspectors who prefer an analogue dial\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOil and gas maintenance workshops\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRefinery and petrochemical shutdown teams\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCNC machine shops and fabrication workshops\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTraining centres and apprentices learning dimensional measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBuyers replacing digital calipers with a battery-free analogue instrument\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHow to Measure\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eClean the jaws and measuring surfaces before use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws and check the dial zero.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOpen the jaws and position them gently around the feature being measured.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eKeep the caliper square and properly aligned with the workpiece.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently without applying excessive measuring force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the whole-unit value from the main beam scale and add the dial reading at 0.001\" per graduation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUse the depth bar or step surfaces when measuring depth or step dimensions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClean the instrument after use and store it safely.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat range does the Mitutoyo 505-743 dial caliper measure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures from 0\" to 8\" (0–203.2 mm).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the 505-743 measure inside and depth dimensions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It measures outside, inside, depth and step dimensions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the graduation of the Mitutoyo 505-743?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe graduation is 0.001\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 0.1\" per revolution mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe dial completes one full revolution for 0.1\" of movement, with individual graduations corresponding to 0.001\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose a dial caliper over a digital caliper?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-743 uses an analogue dial and does not require batteries or an electronic display. This makes it convenient for routine workshop measurement where battery-free operation is preferred.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I read the Mitutoyo 505-743 dial?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead the whole-unit measurement from the main beam scale and then add the dial reading. Each dial graduation represents 0.001\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Mitutoyo model should I choose for measurements up to 8\"?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-743 provides a 0\"–8\" (0–203.2 mm) range. Other 505-series 8\" models, such as the 505-739 or 505-743J, can be compared according to their specific jaw and configuration requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Mitutoyo 505-743 be recalibrated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Periodic calibration through an appropriate calibration service can verify measurement performance and maintain traceability where required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I store and care for the 505-743?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWipe the measuring faces clean after use, keep the instrument away from direct sunlight and coolant during storage, avoid dropping it, and check the zero regularly. Schedule periodic calibration according to your quality requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I order the Mitutoyo 505-743 in Kuwait?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor pricing and availability, call or WhatsApp General Tech Services LLC at \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e with the model number and required quantity.\u003c\/p\u003e\n\u003cp\u003eRequest Pricing \u0026amp; Availability\u003c\/p\u003e\n\u003cp\u003eContact General Tech Services LLC for current pricing and availability of the Mitutoyo 505-743 dial caliper in Kuwait.\u003c\/p\u003e\n\u003cp\u003eCall or WhatsApp \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e to request a quote.\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170284638321,"sku":"505-743","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-dial-calipers-default-title-mitutoyo-505-743-dial-caliper-0-8-graduation-001-1-rev-25382151553137.png?v=1761749895"},{"product_id":"mitutoyo-505-746-dial-caliper-0-12-graduation-001-1-rev","title":"Mitutoyo 505-746 | Dial Caliper | 0-12 in, 0.001 in, 0.1 in\/rev","description":"\u003cp\u003e\u003cstrong\u003ePart No. 505-746 | Range 0\"–12\" (0–304.8 mm) | Graduation 0.001\" | 0.1\"\/rev\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduct Overview\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 505-746 dial caliper measures outside, inside, depth and step dimensions across a 0\"–12\" (0–304.8 mm) range. Its easy-to-read analogue dial provides 0.001\" graduation with 0.1\" per revolution, giving clear readings for routine dimensional inspection without batteries or an electronic display.\u003c\/p\u003e\n\u003cp\u003eConstructed from hardened stainless steel, the caliper features ultra-smooth sliding and strong shock protection for dependable daily workshop use. The bright yellow dial has large characters for easy reading, while the standard outside and inside jaws, depth bar and step capability allow one instrument to handle a wide range of measurement tasks.\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 505-746 is suitable for machine shops, QC inspection, power and desalination plant maintenance teams, fabrication workshops and oil and gas service contractors in Kuwait.\u003c\/p\u003e\n\u003cp\u003eFor close-tolerance measurements, allow the caliper and workpiece to reach the same temperature before measuring. Steel expands by approximately 11.5 μm per metre per °C. At 304.8 mm, a 10 °C temperature difference can shift the measurement by approximately 35.1 μm.\u003c\/p\u003e\n\u003cp\u003eKey Benefits\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eOutside, inside, depth and step measurement in one tool\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0\"–12\" (0–304.8 mm) measuring range\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0.001\" graduation for clear dimensional readings\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0.1\" per revolution dial configuration\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUltra-smooth sliding for controlled measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eShock protection for demanding workshop environments\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHardened stainless steel construction for durability\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBright yellow dial with large, easy-to-read characters\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBattery-free analogue operation with no electronic display\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMitutoyo 505 series design for everyday dimensional inspection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWho This Product Is Best For\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMachinists and fitters requiring a dependable everyday caliper\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQC inspectors who prefer analogue dial measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMaintenance teams in power and desalination facilities\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOil and gas service contractors and maintenance workshops\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFabrication and machining workshops\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTraining centres and apprentices learning dimensional measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBuyers replacing digital calipers with a battery-free analogue instrument\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHow to Measure\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eClean the measuring faces and close the jaws.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCheck the dial zero before taking the measurement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOpen the jaws and position them gently around the feature.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eKeep the caliper square and properly aligned with the workpiece.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently without applying excessive force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the whole-unit value from the main scale and add the dial reading at 0.001\" per graduation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUse the depth bar or step surfaces when measuring those features.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClean the measuring surfaces after use and store the caliper safely.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat range does the Mitutoyo 505-746 dial caliper measure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures from 0\" to 12\" (0–304.8 mm).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the 505-746 measure inside and depth dimensions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It measures outside, inside, depth and step dimensions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the graduation of the Mitutoyo 505-746?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe graduation is 0.001\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does 0.1\" per revolution mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe dial completes one full revolution for 0.1\" of movement. Individual dial graduations correspond to 0.001\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose a dial caliper over a digital caliper?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-746 uses an analogue dial and does not require batteries or an electronic display. This provides a straightforward measurement solution for routine workshop use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I read the Mitutoyo 505-746 dial?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead the whole-unit value from the beam scale and then add the dial reading. Each graduation represents 0.001\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich model should I choose for a 0\"–12\" measurement range?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-746 provides a 0\"–12\" (0–304.8 mm) range. Other Mitutoyo 505-series models have different configurations, so compare the specific range and dial\/jaw arrangement required for your application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Mitutoyo 505-746 be recalibrated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Periodic calibration through an appropriate calibration service can verify measurement performance and maintain traceability where required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I store and care for the 505-746?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWipe the measuring faces clean after use, keep the instrument away from direct sunlight and coolant during storage, avoid dropping it, and check the zero regularly. Periodic calibration can be scheduled according to your quality requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I order the Mitutoyo 505-746 in Kuwait?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor pricing and availability, call or WhatsApp General Tech Services LLC at \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e with the model number and required quantity.\u003c\/p\u003e\n\u003cp\u003eRequest Pricing \u0026amp; Availability\u003c\/p\u003e\n\u003cp\u003eContact General Tech Services LLC for current pricing and availability of the Mitutoyo 505-746 dial caliper in Kuwait.\u003c\/p\u003e\n\u003cp\u003eCall or WhatsApp \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e to request a quote.\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170284671089,"sku":"505-746","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-dial-calipers-default-title-mitutoyo-505-746-dial-caliper-0-12-graduation-001-1-rev-25382152044657.png?v=1761749895"},{"product_id":"mitutoyo-505-749-dial-caliper-series-505-graduation-0-001-inch-accuracy-002-inch-range-0-to-12-inch","title":"Mitutoyo 505-749 | Dial Caliper | 0-12 in, 0.001 in, lock","description":"\u003cp\u003e\u003cstrong\u003ePart No. 505-749 | Range 0\"–12\" (0–304.8 mm) | Graduation 0.001\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduct Overview\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 505-749 dial caliper measures outside, inside, depth and step dimensions across a 0\"–12\" (0–304.8 mm) range. Its clear analogue dial provides a 0.001\" graduation and ±0.002\" accuracy without batteries or an electronic display.\u003c\/p\u003e\n\u003cp\u003eBuilt from hardened stainless steel, the caliper features ultra-smooth sliding, shock protection and a bright yellow dial with large characters for easy reading. Its standard outside and inside jaws, depth bar and step measurement capability make it suitable for everyday dimensional inspection.\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 505-749 is well suited to machinists, QC inspectors, calibration environments, fabrication workshops and maintenance teams supporting Kuwait's oil, gas and utilities sectors.\u003c\/p\u003e\n\u003cp\u003eFor close-tolerance measurements in hot workshop conditions, allow the workpiece to reach a stable temperature before measuring. At 304.8 mm, a 10 °C temperature difference can change the length of a steel part by approximately 35.1 μm.\u003c\/p\u003e\n\u003cp\u003eKey Benefits\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e0.001\" graduation for clear, precise analogue readings\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e±0.002\" accuracy for routine dimensional inspection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHardened stainless steel construction for durable workshop use\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUltra-smooth sliding mechanism for consistent operation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eShock protection for demanding daily applications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBright yellow dial with large characters for easy reading\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNo batteries or electronic display to maintain\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOutside, inside, depth and step measurement in one tool\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0\"–12\" (0–304.8 mm) measuring range\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMitutoyo 505 series design for general workshop measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWho This Product Is Best For\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMachinists and fitters needing a dependable everyday dial caliper\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQC inspectors who prefer a clear analogue reading\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMaintenance teams working in oil and gas facilities\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFabrication and machining workshops\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCalibration and dimensional inspection environments\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTraining centres and apprentices learning precision measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUsers replacing digital calipers where battery-free operation is preferred\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHow to Measure\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eClean the jaws and measuring surfaces, then close the jaws and check the dial zero.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOpen the jaws and position them gently around the feature being measured.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eKeep the caliper square and properly aligned with the workpiece.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently without excessive measuring force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the whole-unit value from the beam scale and add the dial reading at 0.001\" per graduation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUse the depth bar or step surfaces when measuring depth or step dimensions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWipe the caliper clean after use and store it safely between jobs.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat range does the Mitutoyo 505-749 dial caliper measure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures from 0\" to 12\" (0–304.8 mm).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Mitutoyo 505-749 measure inside and depth dimensions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It provides outside, inside, depth and step measurement capabilities.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose a dial caliper instead of a digital caliper?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-749 uses an analogue dial and requires no batteries or electronic display. This makes it convenient for routine workshop measurement where battery-free operation is preferred.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I read the Mitutoyo 505-749 dial?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead the whole-unit measurement from the main beam scale, then add the dial reading. Each dial graduation represents 0.001\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the accuracy of the 505-749?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe stated accuracy is ±0.002\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Mitutoyo 505-749 and other 12\" calipers?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-749 is a 0\"–12\" dial caliper. When comparing other 12\" models such as the 505-748 or 505-750, check the jaw configuration and other model-specific specifications to select the appropriate instrument for your application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Mitutoyo 505-749 be recalibrated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Periodic calibration through an appropriate calibration service can help maintain measurement traceability and verify instrument performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I store and care for the 505-749?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClean the measuring faces after use, keep the caliper away from direct sunlight and coolant when stored, avoid impacts or dropping, and check the dial zero regularly. Periodic calibration is recommended where measurement traceability is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I order the Mitutoyo 505-749 in Kuwait?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor pricing and availability, call or WhatsApp General Tech Services LLC at \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e with the model number and required quantity.\u003c\/p\u003e\n\u003cp\u003eRequest Pricing \u0026amp; Availability\u003c\/p\u003e\n\u003cp\u003eFor the Mitutoyo 505-749 dial caliper, contact General Tech Services LLC for current Kuwait pricing and availability.\u003c\/p\u003e\n\u003cp\u003eCall or WhatsApp \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e to request a quote.\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170879836273,"sku":"505-749","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-dial-calipers-default-title-mitutoyo-505-749-dial-caliper-series-505-graduation-0-001-inch-accuracy-002-inch-range-0-to-12-inch-25383268188273.jpg?v=1761744788"},{"product_id":"mitutoyo-505-682-dial-caliper-series-505-graduation-0-01mm-accuracy-0-03mm-range-0-to-200mm","title":"Mitutoyo 505-682 | Dial Caliper | 0-200 mm, 0.01 mm","description":"\u003cp\u003e\u003cstrong\u003ePart No. 505-682 | Range 0–200 mm | Graduation 0.01 mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduct Overview\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 505-682 dial caliper measures outside, inside, depth and step dimensions across a 0–200 mm range. Its clear analogue dial provides a 0.01 mm graduation and ±0.03 mm accuracy without batteries or an electronic display.\u003c\/p\u003e\n\u003cp\u003eThe caliper is built from hardened stainless steel and features an ultra-smooth sliding mechanism with strong shock protection. Titanium coating on the sliding surfaces supports durability, while the bright yellow dial uses large characters for easy reading.\u003c\/p\u003e\n\u003cp\u003eThe 505-682 is suitable for machine shops, QC inspection, power and desalination plant maintenance teams, and oil and gas service contractors in Kuwait.\u003c\/p\u003e\n\u003cp\u003eFor close-tolerance measurements, allow the caliper and workpiece to reach the same temperature before measuring. Steel expands approximately 11.5 μm per metre per °C; over 200 mm, a 10 °C temperature difference can result in approximately 23.0 μm of dimensional change.\u003c\/p\u003e\n\u003cp\u003eKey Benefits\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMeasures outside, inside, depth and step dimensions with one tool.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0.01 mm graduation provides a clear analogue measurement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e±0.03 mm stated accuracy.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUltra-smooth sliding mechanism supports consistent operation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eShock-protected dial mechanism for regular workshop use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTitanium-coated sliding surfaces support durability.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHardened stainless steel construction for industrial environments.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBright yellow dial with large characters improves readability.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBattery-free operation eliminates dependence on an electronic display.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0–200 mm measuring range covers common industrial measurement requirements.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePart of the Mitutoyo 505 series dial caliper range.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWho This Product Is Best For\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMachinists and fitters needing a reliable everyday metric caliper.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQC inspectors who prefer an analogue dial reading.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMaintenance teams in power and desalination plants.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOil and gas service contractors in Kuwait.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMachine shops and fabrication workshops performing routine dimensional checks.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTraining centres and apprentices learning conventional measurement methods.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBuyers replacing digital calipers where battery-free operation is preferred.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHow to Use\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eClean the jaws and measuring surfaces before use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently and check the dial zero.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOpen the jaws and position them around the feature being measured.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eKeep the caliper square and aligned with the workpiece.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently without applying excessive force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the whole-unit value from the beam scale and add the dial reading.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUse the depth bar or step surfaces for depth and step measurements.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClean the instrument and store it safely after use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat range does the Mitutoyo 505-682 dial caliper measure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures 0–200 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure inside and depth dimensions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 505-682 measures outside, inside, depth and step dimensions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose a dial caliper over a digital one?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe dial design requires no batteries and has no electronic display, providing a conventional analogue measurement method.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I read the dial?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead the whole-unit measurement from the beam scale, then add the dial reading. The graduation is 0.01 mm per division.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the graduation and accuracy?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe graduation is 0.01 mm and the stated accuracy is ±0.03 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the key construction features of the 505-682?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe caliper uses hardened stainless steel construction, an ultra-smooth sliding mechanism, shock protection and titanium-coated sliding surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich model should I choose if my part is outside 0–200 mm?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-682 covers 0–200 mm. The Mitutoyo 505-732 covers 0–150 mm, while the 505-731 also provides a 0–200 mm range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Mitutoyo 505-682 be recalibrated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Periodic calibration through an ISO\/IEC 17025-accredited calibration service can help maintain measurement traceability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I store and care for it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWipe the measuring faces clean after use, keep the instrument away from direct sunlight and coolant, avoid dropping it, and check the zero regularly. Periodic calibration is recommended when measurement traceability is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I order the Mitutoyo 505-682 dial caliper in Kuwait?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePricing is quote-based. Call or WhatsApp \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e with the model number and required quantity to request pricing and availability.\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170881769585,"sku":"505-682","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-dial-calipers-default-title-mitutoyo-505-682-dial-caliper-series-505-graduation-0-01mm-accuracy-0-03mm-range-0-to-200mm-25383307444337.jpg?v=1761744767"},{"product_id":"mitutoyo-505-742j-dial-caliper-series-505-type-silver-cover-graduation-0-001-inch-accuracy-0-001-inch-range-0-to-6-inch-weight-175-g","title":"Mitutoyo 505-742J | Dial Caliper | 0-6 in, 0.001 in, silver cover","description":"\u003cp\u003e\u003cstrong\u003ePart No. 505-742J | Range 0\"–6\" (0–152.4 mm) | Graduation 0.001\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduct Overview\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 505-742J dial caliper measures outside, inside, depth and step dimensions across a 0\"–6\" (0–152.4 mm) range. Its clear analogue dial provides a 0.001\" graduation and ±0.001\" accuracy without batteries or an electronic display.\u003c\/p\u003e\n\u003cp\u003eThe caliper is built from hardened stainless steel and features an ultra-smooth sliding mechanism with strong shock protection. Titanium coating on the sliding surfaces supports durability, while the bright yellow dial uses large characters for easy reading. The model has a silver cover and weighs 175 g.\u003c\/p\u003e\n\u003cp\u003eThe 505-742J is suitable for oil and gas maintenance workshops, refinery and petrochemical shutdown crews, CNC machine shops, QC inspection and general industrial measurement in Kuwait.\u003c\/p\u003e\n\u003cp\u003eFor close-tolerance measurements, allow the caliper and workpiece to reach the same temperature before measuring. Steel expands approximately 11.5 μm per metre per °C; over 152.4 mm, a 10 °C temperature difference can result in approximately 17.5 μm of dimensional change.\u003c\/p\u003e\n\u003cp\u003eKey Benefits\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eClear analogue dial reading without batteries or an electronic display.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0.001\" graduation provides precise measurement readings.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e±0.001\" stated accuracy.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMeasures outside, inside, depth and step dimensions with one tool.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUltra-smooth sliding mechanism supports consistent operation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eShock-protected dial mechanism for regular workshop use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTitanium-coated sliding surfaces support durability.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHardened stainless steel construction for industrial environments.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBright yellow dial with large characters improves readability.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSilver cover and 175 g weight support convenient workshop handling.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePart of the Mitutoyo 505 series dial caliper range.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWho This Product Is Best For\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMachinists and fitters needing a reliable everyday caliper.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQC inspectors who prefer an analogue dial reading.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMaintenance teams in machine shops and industrial facilities.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOil and gas maintenance workshops.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRefinery and petrochemical shutdown crews.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCNC machine shops and fabrication workshops.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTraining centres and apprentices learning conventional measurement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBuyers replacing digital calipers where battery-free operation is preferred.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHow to Use\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eClean the jaws and measuring surfaces before use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently and check the dial zero.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOpen the jaws and position them around the feature being measured.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eKeep the caliper square and aligned with the workpiece.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently without applying excessive force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the whole-unit value from the beam scale and add the dial reading.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUse the depth bar or step surfaces for depth and step measurements.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClean the instrument and store it safely after use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat range does the Mitutoyo 505-742J dial caliper measure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures 0\"–6\" (0–152.4 mm).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure inside and depth dimensions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 505-742J measures outside, inside, depth and step dimensions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose a dial caliper over a digital one?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe dial design requires no batteries and has no electronic display, providing a conventional analogue measurement method.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I read the dial?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead the whole-unit measurement from the beam scale, then add the dial reading. The graduation is 0.001\" per division.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cover colour?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-742J has a silver cover and a bright yellow dial with large characters for readability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the key construction features of the 505-742J?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt uses hardened stainless steel construction, an ultra-smooth sliding mechanism, shock protection and titanium-coated sliding surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich model should I choose if my part is outside 0\"–6\"?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-742J covers 0\"–6\". The Mitutoyo 505-742 is another 0\"–6\" option, while the 505-744 also covers 0\"–6\" with OD carbide-tipped jaws.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Mitutoyo 505-742J be recalibrated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Periodic calibration through an ISO\/IEC 17025-accredited calibration service can help maintain measurement traceability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I store and care for it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWipe the measuring faces clean after use, keep the instrument away from direct sunlight and coolant, avoid dropping it, and check the zero regularly. Periodic calibration is recommended when measurement traceability is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I order the Mitutoyo 505-742J dial caliper in Kuwait?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePricing is quote-based. Call or WhatsApp \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e with the model number and required quantity to request pricing and availability.\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170886094961,"sku":"505-742J","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-dial-calipers-default-title-mitutoyo-505-742j-dial-caliper-series-505-type-silver-cover-graduation-0-001-inch-accuracy-0-001-inch-range-0-to-6-inch-weight-175-g-25383317962865.jpg?v=1761744723"},{"product_id":"mitutoyo-505-736-dial-caliper-series-505-od-carbide-tipped-jaws-graduation-0-001-inch-accuracy-0-001-inch-range-0-6-inch-weight-175-g","title":"Mitutoyo 505-736 | Dial Caliper | 0-6 in, 0.001 in, OD carbide jaws","description":"\u003cp\u003e\u003cstrong\u003ePart No. 505-736 | Range 0\"–6\" (0–152.4 mm) | Graduation 0.001\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduct Overview\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 505-736 dial caliper measures outside, inside, depth and step dimensions across a 0\"–6\" (0–152.4 mm) range. Its clear analogue dial provides a 0.001\" graduation and ±0.001\" accuracy without batteries or an electronic display.\u003c\/p\u003e\n\u003cp\u003eThe OD jaws are carbide-tipped to resist wear from abrasive and hardened materials, helping maintain the measuring faces during regular workshop use. The caliper features hardened stainless steel construction and weighs 175 g.\u003c\/p\u003e\n\u003cp\u003eThe 505-736 is suitable for QC inspectors, calibration laboratories, machinists, fitters, and fabrication and machining workshops serving Kuwait's oil, gas and utilities sectors.\u003c\/p\u003e\n\u003cp\u003eFor close-tolerance measurements, allow the caliper and workpiece to reach the same temperature before measuring. Steel expands approximately 11.5 μm per metre per °C; over 152.4 mm, a 10 °C temperature difference can result in approximately 17.5 μm of dimensional change.\u003c\/p\u003e\n\u003cp\u003eKey Benefits\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eOD carbide-tipped jaws resist wear from abrasive and hardened materials.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0.001\" graduation provides a clear analogue measurement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e±0.001\" stated accuracy.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMeasures outside, inside, depth and step dimensions with one instrument.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHardened stainless steel construction supports regular workshop use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBattery-free dial operation eliminates dependence on an electronic display.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0\"–6\" (0–152.4 mm) measuring range covers common industrial measurement requirements.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e175 g weight supports convenient routine handling.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePart of the Mitutoyo 505 series dial caliper range.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWho This Product Is Best For\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMachinists and fitters needing a reliable everyday caliper.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQC inspectors who prefer an analogue dial reading.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCalibration laboratories requiring a conventional measurement instrument.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMaintenance teams in oil and gas workshops.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFabrication and machining workshops performing routine dimensional checks.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTraining centres and apprentices learning conventional measurement methods.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBuyers replacing digital calipers where battery-free operation is preferred.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHow to Use\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eClean the jaws and measuring surfaces before use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently and check the dial zero.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOpen the jaws and position them around the feature being measured.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eKeep the caliper square and aligned with the workpiece.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently without applying excessive force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the main scale and dial to obtain the measurement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUse the depth bar or step surfaces for depth and step measurements.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClean the instrument and store it safely after use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat range does the Mitutoyo 505-736 dial caliper measure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures 0\"–6\" (0–152.4 mm).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure inside and depth dimensions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 505-736 measures outside, inside, depth and step dimensions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose a dial caliper over a digital one?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe dial design requires no batteries and has no electronic display, providing a conventional analogue measurement method.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the carbide-tipped jaws for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe carbide-tipped OD jaws resist wear when measuring abrasive or hardened materials, helping maintain the measuring faces during regular use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the graduation and accuracy?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe graduation is 0.001\" and the stated accuracy is ±0.001\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich model should I choose if my part is outside 0\"–6\"?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-736 covers 0\"–6\". The Mitutoyo 505-738 also covers 0\"–6\" and uses ID\/OD carbide-tipped jaws.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Mitutoyo 505-736 be recalibrated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Periodic calibration through an ISO\/IEC 17025-accredited calibration service can help maintain measurement traceability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I store and care for it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWipe the measuring faces clean after use, keep the instrument away from direct sunlight and coolant, avoid dropping it, and check the zero regularly. Periodic calibration is recommended when measurement traceability is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I order the Mitutoyo 505-736 dial caliper in Kuwait?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePricing is quote-based. Call or WhatsApp \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e with the model number and required quantity to request pricing and availability.\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170886160497,"sku":"505-736","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-dial-calipers-default-title-mitutoyo-505-736-dial-caliper-series-505-od-carbide-tipped-jaws-graduation-0-001-inch-accuracy-0-001-inch-range-0-6-inch-weight-175-g-25383318454385.jpg?v=1761744722"},{"product_id":"mitutoyo-505-738-dial-caliper-series-505-id-od-carbide-tipped-jaws-graduation-0-001-inch-accuracy-0-001-inch-range-0-to-6-inch-weight-175-g","title":"Mitutoyo 505-738 | Dial Caliper | 0-6 in, 0.001 in, ID\/OD carbide jaws","description":"\u003cp\u003e\u003cstrong\u003ePart No. 505-738 | Range 0\"–6\" (0–152.4 mm) | Graduation 0.001\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduct Overview\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 505-738 dial caliper measures outside, inside, depth and step dimensions across a 0\"–6\" (0–152.4 mm) range. Its clear analogue dial provides a 0.001\" graduation and ±0.001\" accuracy without batteries or an electronic display.\u003c\/p\u003e\n\u003cp\u003eBoth the ID and OD jaws are carbide-tipped to resist wear from abrasive and hardened materials, helping maintain the measuring faces during regular workshop use. The caliper is constructed from hardened stainless steel and weighs 175 g.\u003c\/p\u003e\n\u003cp\u003eThe 505-738 is suited to machine shops, QC inspection, power and desalination plant maintenance teams, and oil and gas service contractors in Kuwait.\u003c\/p\u003e\n\u003cp\u003eFor close-tolerance measurements, allow the caliper and workpiece to reach the same temperature before measuring. Steel expands approximately 11.5 μm per metre per °C; over 152.4 mm, a 10 °C temperature difference can result in approximately 17.5 μm of dimensional change.\u003c\/p\u003e\n\u003cp\u003eKey Benefits\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eID\/OD carbide-tipped jaws resist wear from abrasive and hardened materials.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0.001\" graduation provides a clear analogue measurement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e±0.001\" stated accuracy.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMeasures outside, inside, depth and step dimensions with one instrument.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHardened stainless steel construction supports regular workshop use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBattery-free dial operation eliminates dependence on an electronic display.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0\"–6\" (0–152.4 mm) measuring range covers common industrial measurement requirements.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e175 g weight supports convenient routine handling.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePart of the Mitutoyo 505 series dial caliper range.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWho This Product Is Best For\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMachinists and fitters needing a reliable everyday caliper.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQC inspectors who prefer an analogue dial reading.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMaintenance teams in power and desalination plants.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOil and gas service contractors in Kuwait.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMachine shops and fabrication workshops requiring carbide-tipped ID and OD jaws.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTraining centres and apprentices learning conventional measurement methods.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBuyers replacing digital calipers where battery-free operation is preferred.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHow to Use\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eClean the ID and OD jaws and other measuring surfaces before use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently and check the dial zero.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePosition the appropriate jaws around or inside the feature being measured.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eKeep the caliper square and aligned with the workpiece.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently without excessive force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the main scale and dial to obtain the measurement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUse the depth bar or step surfaces for depth and step measurements.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClean the instrument and store it safely after use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat range does the Mitutoyo 505-738 dial caliper measure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures 0\"–6\" (0–152.4 mm).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure inside and depth dimensions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 505-738 measures outside, inside, depth and step dimensions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre both the ID and OD jaws carbide-tipped?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The model is specified with ID\/OD carbide-tipped jaws designed to resist wear from abrasive and hardened materials.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose a dial caliper over a digital one?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe dial design requires no batteries and has no electronic display, providing a conventional analogue measurement method.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the graduation and accuracy?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe graduation is 0.001\" and the stated accuracy is ±0.001\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich model should I choose if my part is outside 0\"–6\"?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-738 covers 0\"–6\". Other Mitutoyo 505 series models with the same nominal range can be selected according to the required jaw configuration and application, including the 505-736 and 505-742.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Mitutoyo 505-738 be recalibrated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Periodic calibration through an ISO\/IEC 17025-accredited calibration service can help maintain measurement traceability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I store and care for it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWipe the measuring faces clean after use, keep the instrument away from direct sunlight and coolant, avoid dropping it, and check the zero regularly. Periodic calibration is recommended when measurement traceability is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I order the Mitutoyo 505-738 dial caliper in Kuwait?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePricing is quote-based. Call or WhatsApp \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e with the model number and required quantity to request pricing and availability.\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170886193265,"sku":"505-738","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-dial-calipers-default-title-mitutoyo-505-738-dial-caliper-series-505-id-od-carbide-tipped-jaws-graduation-0-001-inch-accuracy-0-001-inch-range-0-to-6-inch-weight-175-g-25383318487153.jpg?v=1761744721"},{"product_id":"mitutoyo-505-744-dial-caliper-series-505-od-carbide-tipped-jaws-graduation-0-001-inch-accuracy-0-001-inch-range-0-to-6-inch-weight-175-g","title":"Mitutoyo 505-744 | Dial Caliper | 0-6 in, OD carbide-tipped jaws","description":"\u003cp\u003e\u003cstrong\u003ePart No. 505-744 | Range 0\"–6\" (0–152.4 mm) | Graduation 0.001\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduct Overview\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 505-744 dial caliper measures outside, inside, depth and step dimensions across a 0\"–6\" (0–152.4 mm) range. Its clear analogue dial provides a 0.001\" graduation and ±0.001\" accuracy without batteries or an electronic display.\u003c\/p\u003e\n\u003cp\u003eThe OD jaws are carbide-tipped to resist wear from abrasive and hardened materials, while the hardened stainless steel construction supports regular workshop use. At 175 g, the caliper is suitable for routine dimensional checks in machine shops and maintenance environments.\u003c\/p\u003e\n\u003cp\u003eThe 505-744 is well suited to oil and gas maintenance workshops, refinery and petrochemical shutdown crews, CNC machine shops, QC inspection and general industrial measurement in Kuwait.\u003c\/p\u003e\n\u003cp\u003eTemperature can affect close-tolerance measurements. Steel expands approximately 11.5 μm per metre per °C. Over 152.4 mm, a 10 °C temperature difference can result in approximately 17.5 μm of dimensional change. Allow the workpiece and caliper to reach the same temperature before taking a final measurement.\u003c\/p\u003e\n\u003cp\u003eKey Benefits\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eClear analogue dial reading without batteries or an electronic display.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0.001\" graduation for precise measurement reading.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e±0.001\" stated accuracy.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOD carbide-tipped jaws resist wear from abrasive and hardened materials.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMeasures outside, inside, depth and step dimensions with one tool.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHardened stainless steel construction for regular workshop use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0\"–6\" (0–152.4 mm) range covers common industrial measurement requirements.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e175 g weight supports convenient routine handling.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePart of the Mitutoyo 505 series dial caliper range.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWho This Product Is Best For\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMachinists and fitters needing a reliable everyday caliper.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQC inspectors who prefer an analogue dial reading.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOil and gas maintenance teams performing routine dimensional checks.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRefinery and petrochemical shutdown crews.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCNC machine shops and fabrication workshops.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTraining centres and apprentices learning conventional measurement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBuyers replacing digital calipers where battery-free operation is preferred.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHow to Use\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eClean the jaws and measuring surfaces before use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently and check the dial zero.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOpen the jaws and position them around the feature being measured.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eKeep the caliper square and aligned with the workpiece.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently without applying excessive force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the main scale and dial to obtain the measurement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUse the depth bar or step surfaces for depth and step measurements.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClean the instrument and store it safely after use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat range does the Mitutoyo 505-744 dial caliper measure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures 0\"–6\" (0–152.4 mm).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure inside and depth dimensions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It measures outside, inside, depth and step dimensions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose a dial caliper over a digital one?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe dial design requires no batteries and has no electronic display, providing a conventional analogue measurement method.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the carbide-tipped jaws for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe carbide-tipped OD jaws resist wear when measuring abrasive or hardened materials, helping maintain the measuring faces over regular use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the graduation and accuracy?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe graduation is 0.001\" and the stated accuracy is ±0.001\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich model should I choose if my part is outside 0\"–6\"?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-744 covers 0\"–6\". The Mitutoyo 505-742J is another 0\"–6\" option, while the 505-737 provides a longer 0\"–8\" range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Mitutoyo 505-744 be recalibrated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Periodic calibration through an ISO\/IEC 17025-accredited calibration service can help maintain measurement traceability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I store and care for it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWipe the measuring faces clean after use, keep the instrument away from direct sunlight and coolant, avoid dropping it, and check the zero regularly. Periodic calibration is recommended when measurement traceability is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I order the Mitutoyo 505-744 dial caliper in Kuwait?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePricing is quote-based. Call or WhatsApp \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e with the model number and required quantity to request pricing and availability.\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170886357105,"sku":"505-744","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-dial-calipers-default-title-mitutoyo-505-744-dial-caliper-series-505-od-carbide-tipped-jaws-graduation-0-001-inch-accuracy-0-001-inch-range-0-to-6-inch-weight-175-g-25383318552689.jpg?v=1761744721"},{"product_id":"mitutoyo-505-743j-dial-caliper-series-505-type-silver-cover-graduation-0-001-inch-acuracy-0-002-inch-range-0-to-8-inch-weight-185-g","title":"Mitutoyo 505-743J | Dial Caliper | 0-8 in, 0.001 in, silver cover","description":"\u003cp\u003e\u003cstrong\u003ePart No. 505-743J | Range 0\"–8\" (0–203.2 mm) | Graduation 0.001\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduct Overview\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 505-743J dial caliper measures outside, inside, depth and step dimensions across a 0\"–8\" (0–203.2 mm) range. It provides a clear analogue reading with 0.001\" graduation and ±0.002\" accuracy, without batteries or an electronic display.\u003c\/p\u003e\n\u003cp\u003eThe caliper is made from hardened stainless steel and features an ultra-smooth sliding mechanism with shock protection. Titanium coating on the sliding surfaces supports durability, while the bright yellow dial uses large characters for easy reading. The silver cover and 185 g weight make it suitable for routine workshop measurement.\u003c\/p\u003e\n\u003cp\u003eThe 505-743J is suited to machine shops, QC inspection, maintenance teams, power and desalination plants, and oil and gas service contractors in Kuwait.\u003c\/p\u003e\n\u003cp\u003eFor close-tolerance measurements, allow the caliper and workpiece to reach the same temperature before measuring. Steel expands approximately 11.5 μm per metre per °C; over 203.2 mm, a 10 °C temperature difference corresponds to roughly 23.4 μm of dimensional change.\u003c\/p\u003e\n\u003cp\u003eKey Benefits\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMeasures outside, inside, depth and step dimensions with one tool.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0.001\" graduation supports precise analogue readings.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e±0.002\" stated accuracy.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHardened stainless steel construction for regular workshop use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUltra-smooth sliding mechanism supports consistent operation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eShock-protected dial mechanism for daily industrial use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTitanium-coated sliding surfaces improve wear resistance.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBright yellow dial with large characters improves readability.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBattery-free analogue operation eliminates dependence on electronic displays.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSilver cover and 185 g weight suit routine workshop handling.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePart of the Mitutoyo 505 series dial caliper range.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWho This Product Is Best For\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMachinists and fitters needing an everyday analogue caliper.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQC inspectors who prefer a clear dial reading.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMaintenance teams in power and desalination plants.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOil and gas service contractors in Kuwait.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFabrication and machining workshops requiring versatile dimensional measurement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTraining centres and apprentices learning conventional measurement methods.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBuyers replacing digital calipers where battery-free operation is preferred.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHow to Use\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eClean the jaws and measuring surfaces before use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently and check the dial zero.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOpen the jaws and position them around the feature being measured.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eKeep the caliper square and aligned with the workpiece.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently without applying excessive force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the whole-unit value from the beam scale and add the dial reading.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUse the depth bar or step surfaces for depth and step measurements.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClean and store the caliper safely after use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat range does the Mitutoyo 505-743J dial caliper measure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures 0\"–8\" (0–203.2 mm).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure inside and depth dimensions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It measures outside, inside, depth and step dimensions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose a dial caliper over a digital one?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe dial caliper requires no batteries and has no electronic display, providing a conventional analogue measurement method.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I read the dial?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead the whole-unit measurement from the beam scale, then add the dial reading. The graduation is 0.001\" per division.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is special about the 505-743J sliding mechanism?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe model features ultra-smooth sliding, shock protection and titanium coating on the sliding surfaces to support durable daily operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cover colour?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-743J has a silver cover and a bright yellow dial with large characters for readability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich model should I choose if my part is outside 0\"–8\"?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-743J covers 0\"–8\". Other 505 series models can be selected when a different measuring range is required, including the 505-746 for a 0\"–12\" range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Mitutoyo 505-743J be recalibrated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Periodic calibration through an ISO\/IEC 17025-accredited calibration service can help maintain measurement traceability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I store and care for it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWipe the measuring faces clean after use, protect the instrument from direct sunlight and coolant, avoid dropping it, and check the zero regularly. Periodic calibration is recommended when measurement traceability is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I order the Mitutoyo 505-743J dial caliper in Kuwait?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePricing is quote-based. Call or WhatsApp \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e with the model number and required quantity to request pricing and availability.\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170886389873,"sku":"505-743J","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-dial-calipers-default-title-mitutoyo-505-743j-dial-caliper-series-505-type-silver-cover-graduation-0-001-inch-acuracy-0-002-inch-range-0-to-8-inch-weight-185-g-25383318585457.jpg?v=1761744721"},{"product_id":"mitutoyo-505-737-dial-caliper-series-505-od-carbide-tipped-jaws-graduation-0-001-inch-accuracy-0-002-inch-range-0-to-8-inch-weight-185-g","title":"Mitutoyo 505-737 | Dial Caliper | 0-8 in, 0.001 in, OD carbide jaws","description":"\u003cp\u003e\u003cstrong\u003ePart No. 505-737 | Range 0\"–8\" (0–203.2 mm) | Graduation 0.001\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduct Overview\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 505-737 dial caliper measures outside, inside, depth and step dimensions across a 0\"–8\" (0–203.2 mm) range. Its clear analogue dial provides an easy-to-read measurement without batteries or an electronic display, while the OD jaws feature carbide-tipped measuring faces for improved wear resistance.\u003c\/p\u003e\n\u003cp\u003eThe caliper provides ±0.002\" accuracy and a 0.001\" graduation, with a lightweight 185 g construction suited to routine workshop measurement. It is suitable for machinists, QC inspectors, maintenance teams, fabrication workshops and other industrial users in Kuwait.\u003c\/p\u003e\n\u003cp\u003eFor close-tolerance work, keep the measuring faces clean and allow the workpiece to reach a stable temperature before measurement. At 203.2 mm, a 10 °C temperature difference can change a steel part's length by approximately 23.4 μm.\u003c\/p\u003e\n\u003cp\u003eKey Benefits\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eCarbide-tipped OD jaws resist wear from abrasive and hardened materials.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0.001\" graduation provides clear, precise analogue readings.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHardened stainless steel construction supports regular workshop use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAnalogue dial operates without batteries or an electronic display.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMeasures outside, inside, depth and step dimensions with one instrument.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0\"–8\" (0–203.2 mm) measuring range covers a broad range of everyday checks.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e185 g weight makes the caliper convenient for routine inspection and measurement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePart of the Mitutoyo 505 series of dial calipers.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWho This Product Is Best For\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMachinists and fitters needing an everyday analogue caliper.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQC inspectors who prefer a dial-based measurement system.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMaintenance teams working in industrial, oil and gas environments.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFabrication and machining workshops requiring OD carbide-tipped jaws.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTraining centres and apprentices learning conventional measurement techniques.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUsers replacing digital calipers where battery-free operation is preferred.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHow to Use\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eClean the jaws and measuring surfaces before use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently and check the zero position.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOpen the jaws and position them around the feature being measured.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eKeep the caliper square and aligned with the part.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently without excessive force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the main scale and dial to obtain the measurement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUse the depth bar or step surfaces when checking depth or step dimensions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWipe the instrument clean and store it safely after use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat range does the Mitutoyo 505-737 dial caliper measure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures 0\"–8\" (0–203.2 mm).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure inside and depth dimensions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The 505-737 supports outside, inside, depth and step measurements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose a dial caliper over a digital one?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe dial design requires no batteries and has no electronic display, making it ready for use without relying on battery power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the carbide-tipped jaws for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe carbide-tipped OD jaws are designed to resist wear when measuring abrasive or hardened materials.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the graduation and accuracy?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe graduation is 0.001\" and the stated accuracy is ±0.002\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Mitutoyo 505-737 be recalibrated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Periodic calibration through an appropriate accredited calibration service can help maintain measurement traceability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I store and care for it?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClean the measuring faces after use, protect the instrument from coolant and direct sunlight, avoid impacts or drops, and check the zero before measurement. Periodic calibration is recommended when traceability is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I order the Mitutoyo 505-737 dial caliper in Kuwait?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePricing is quote-based. Call or WhatsApp \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e with the model number and required quantity to req\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170886422641,"sku":"505-737","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-dial-calipers-default-title-mitutoyo-505-737-dial-caliper-series-505-od-carbide-tipped-jaws-graduation-0-001-inch-accuracy-0-002-inch-range-0-to-8-inch-weight-185-g-25383318618225.jpg?v=1761744721"},{"product_id":"mitutoyo-505-739-dial-caliper-series-505-id-od-carbide-tipped-jaws-graduation-0-001-inch-accuracy-0-002-inch-range-0-to-8-inch-weight-185-g","title":"Mitutoyo 505-739 | Dial Caliper | 0-8 in, 0.001 in, ID\/OD carbide jaws","description":"\u003cp\u003e\u003cstrong\u003ePart No. 505-739 | Range 0\"–8\" (0–203.2 mm) | Graduation 0.001\" | Accuracy ±0.002\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduct Overview\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 505-739 dial caliper measures outside, inside, depth and step dimensions across a 0\"–8\" (0–203.2 mm) range. Its easy-to-read analogue dial provides 0.001\" graduation, while ID\/OD carbide-tipped jaws are designed to resist wear during repeated measurement of abrasive and hardened materials.\u003c\/p\u003e\n\u003cp\u003eThe mechanical dial requires no batteries or electronic display, providing a straightforward reading for routine dimensional inspection. The caliper has a stated accuracy of ±0.002\" and weighs approximately 185 g.\u003c\/p\u003e\n\u003cp\u003eStandard outside and inside jaws, a depth bar and step measurement capability allow the 505-739 to handle a broad range of everyday inspection tasks. It is suitable for machinists, QC inspectors, maintenance teams, CNC machine shops, and oil and gas service operations across Kuwait.\u003c\/p\u003e\n\u003cp\u003eTemperature can affect dimensional measurements. Steel expands by approximately 11.5 μm per metre for every 1 °C change. For a 203.2 mm workpiece, a 10 °C temperature difference can produce roughly 23.4 μm of dimensional change. Allow the workpiece and Mitutoyo 505-739 to reach the same temperature before taking a final precision reading.\u003c\/p\u003e\n\u003cp\u003eFor a different 0\"–8\" configuration, the Mitutoyo 505-743 is another option in the 505 series.\u003c\/p\u003e\n\u003cp\u003eKey Benefits\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eClear analogue dial reading with no batteries or electronic display\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0\"–8\" measuring range for medium-sized components\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOutside, inside, depth and step measurement in one tool\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eID\/OD carbide-tipped jaws designed to resist wear\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0.001\" graduation for fine dimensional readings\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e±0.002\" stated accuracy\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHardened stainless steel construction for workshop durability\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eApproximately 185 g weight for convenient handling\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMitutoyo 505 series design for everyday dimensional inspection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWho This Product Is Best For\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMachinists and fitters requiring an everyday mechanical caliper\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQC inspectors who prefer analogue measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMaintenance teams in machine shops and industrial facilities\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCNC machine shops performing routine dimensional checks\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOil and gas maintenance and refinery service teams\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTraining centres and apprentices learning mechanical measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBuyers requiring carbide-tipped jaws for repeated inspection of harder or abrasive materials\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHow to Use the Dial Caliper\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eClean the measuring faces and close the jaws gently.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCheck the dial zero before beginning the measurement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOpen the jaws beyond the feature being measured.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePosition the appropriate jaws against the workpiece.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eKeep the caliper square and properly aligned with the part.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently without excessive measuring force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the whole-unit measurement from the main scale and the fractional measurement from the dial.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUse the depth bar for depth measurements and the step surfaces for step dimensions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat range does the Mitutoyo 505-739 measure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures from 0\"–8\" (0–203.2 mm).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the graduation and accuracy?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-739 has a 0.001\" graduation and stated accuracy of ±0.002\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure inside and depth dimensions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The caliper measures outside, inside, depth and step dimensions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are carbide-tipped jaws for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe carbide tips on the measuring jaws are designed to resist wear from abrasive or hardened materials, helping maintain the condition of the measuring faces during repeated use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose a dial caliper instead of a digital caliper?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-739 uses a mechanical analogue dial and does not require batteries or an electronic display. This can be useful in workshop environments where a mechanical measuring instrument is preferred.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Mitutoyo model should I choose if my required range differs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose a caliper whose measuring range covers the required dimension. The 505-739 covers 0\"–8\"; other 505 series models can be selected according to jaw configuration, graduation and application requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Mitutoyo 505-739 be recalibrated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Periodic calibration through an ISO\/IEC 17025-accredited calibration service can help maintain measurement traceability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I store and care for the caliper?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWipe the measuring surfaces clean after use, protect the instrument from coolant and direct sunlight, avoid impacts or drops, and check the zero position regularly. Periodic calibration should be scheduled according to your quality requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I order the Mitutoyo 505-739 in Kuwait?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePricing is quote-based. Call or WhatsApp \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e with the model number and required quantity, and General Tech Services LLC will confirm pricing and availability.\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170886455409,"sku":"505-739","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-dial-calipers-default-title-mitutoyo-505-739-dial-caliper-series-505-id-od-carbide-tipped-jaws-graduation-0-001-inch-accuracy-0-002-inch-range-0-to-8-inch-weight-185-g-25383318650993.jpg?v=1761744720"},{"product_id":"mitutoyo-505-750-dial-caliper-series-505-od-carbide-tipped-jaws-graduation-0-001-inch-accuracy-0-002-inch-range-0-to-12-inch-weight-370-g","title":"Mitutoyo 505-750 | Dial Caliper | 0-12 in, OD carbide-tipped jaws","description":"\u003cp\u003e\u003cstrong\u003ePart No. 505-750 | Range 0\"–12\" (0–304.8 mm) | Graduation 0.001\" | Accuracy ±0.002\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduct Overview\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 505-750 dial caliper measures outside, inside, depth and step dimensions across a 0\"–12\" (0–304.8 mm) range. Its easy-to-read analogue dial provides 0.001\" graduation, while the outside measuring jaws are carbide-tipped to resist wear during repeated measurement of abrasive and hardened materials.\u003c\/p\u003e\n\u003cp\u003eThe mechanical dial requires no batteries or electronic display, providing a straightforward reading for routine dimensional inspection. The caliper has a stated accuracy of ±0.002\" and weighs approximately 370 g.\u003c\/p\u003e\n\u003cp\u003eStandard outside and inside jaws, a depth bar and step measurement capability allow the 505-750 to handle a broad range of everyday inspection tasks. It is suitable for QC inspectors, calibration laboratories, fabrication and machining workshops, and oil, gas and utilities service operations across Kuwait.\u003c\/p\u003e\n\u003cp\u003eKeep the measuring faces clean and store the Mitutoyo 505-750 in its case between jobs. Temperature can also affect dimensional readings. Steel expands by approximately 11.5 μm per metre for every 1 °C change, so a 304.8 mm steel workpiece exposed to a 10 °C temperature difference can change by roughly 35.1 μm. Allow the workpiece and caliper to reach the same temperature before taking a final close-tolerance measurement.\u003c\/p\u003e\n\u003cp\u003eFor a shorter caliper option, see the Mitutoyo 505-749.\u003c\/p\u003e\n\u003cp\u003eKey Benefits\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eOD carbide-tipped jaws designed to resist wear\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0.001\" graduation for fine dimensional readings\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e±0.002\" stated accuracy\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHardened stainless steel construction for workshop durability\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClear analogue dial with no batteries or electronic display\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOutside, inside, depth and step measurement in one tool\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eApproximately 370 g weight for convenient handling\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMitutoyo 505 series design for everyday dimensional inspection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWho This Product Is Best For\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMachinists and fitters requiring an everyday mechanical caliper\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQC inspectors who prefer analogue measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCalibration laboratories performing dimensional inspection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFabrication and machining workshops\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMaintenance teams in oil and gas operations\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUtilities and industrial maintenance teams\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTraining centres and apprentices learning mechanical measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBuyers requiring carbide-tipped outside jaws for repeated inspection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHow to Use the Dial Caliper\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eClean the measuring faces and close the jaws gently.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCheck the dial zero before beginning the measurement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOpen the jaws beyond the feature being measured.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePosition the appropriate jaws against the workpiece.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eKeep the caliper square and properly aligned with the part.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently without excessive measuring force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the whole-unit measurement from the main scale and the fractional measurement from the dial.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUse the depth bar for depth measurements and the step surfaces for step dimensions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat range does the Mitutoyo 505-750 measure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures from 0\"–12\" (0–304.8 mm).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the graduation and accuracy?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-750 has a 0.001\" graduation and stated accuracy of ±0.002\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure inside and depth dimensions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The caliper measures outside, inside, depth and step dimensions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are carbide-tipped jaws for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe carbide tips on the outside measuring jaws are designed to resist wear from abrasive or hardened materials, helping maintain the condition of the measuring faces during repeated use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose a dial caliper instead of a digital caliper?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-750 uses a mechanical analogue dial and does not require batteries or an electronic display. This can be useful in workshop environments where a mechanical measuring instrument is preferred.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich model should I choose if I need a different configuration?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose a caliper according to the required measuring range, graduation and jaw configuration. The 505-750 covers 0\"–12\" with 0.001\" graduation and OD carbide-tipped jaws.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Mitutoyo 505-750 be recalibrated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Periodic calibration through an ISO\/IEC 17025-accredited calibration service can help maintain measurement traceability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I store and care for the caliper?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWipe the measuring surfaces clean after use, protect the instrument from coolant and direct sunlight, store it in its case between jobs, and avoid impacts or drops. Check the zero position regularly and schedule periodic calibration according to your quality requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I order the Mitutoyo 505-750 in Kuwait?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePricing is quote-based. Call or WhatsApp \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e with the model number and required quantity, and General Tech Services LLC will confirm pricing and availability.\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170886520945,"sku":"505-750","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-dial-calipers-default-title-mitutoyo-505-750-dial-caliper-series-505-od-carbide-tipped-jaws-graduation-0-001-inch-accuracy-0-002-inch-range-0-to-12-inch-weight-370-g-25383318683761.jpg?v=1761744719"},{"product_id":"mitutoyo-505-747-dial-caliper-series-505-od-carbide-tipped-jaws-graduation-0-001-inch-accuracy-0-002-inch-range-0-to-12-inch-weight-370-g","title":"Mitutoyo 505-747 | Dial Caliper | 0-12 in, 0.001 in, OD carbide jaws","description":"\u003cp\u003e\u003cstrong\u003ePart No. 505-747 | Range 0\"–12\" (0–304.8 mm) | Graduation 0.001\" | Accuracy ±0.002\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduct Overview\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 505-747 dial caliper measures outside, inside, depth and step dimensions across a 0\"–12\" (0–304.8 mm) range. Its easy-to-read analogue dial provides 0.001\" graduation, while the outside measuring jaws are carbide-tipped for improved wear resistance during repeated inspection.\u003c\/p\u003e\n\u003cp\u003eThe mechanical dial requires no battery or electronic display, providing a straightforward analogue reading for routine workshop measurements. The caliper has a stated accuracy of ±0.002\" and weighs approximately 370 g.\u003c\/p\u003e\n\u003cp\u003eStandard outside and inside jaws, a depth bar and step measurement capability allow the 505-747 to handle a broad range of everyday dimensional checks. It is suitable for machinists, QC inspectors, maintenance teams, power and desalination plant service teams, and oil and gas contractors across Kuwait.\u003c\/p\u003e\n\u003cp\u003eFor consistent precision, allow the Mitutoyo 505-747 and workpiece to reach the same temperature before measurement. Steel expands by approximately 11.5 μm per metre for every 1 °C change. At 304.8 mm, a 10 °C temperature difference can produce roughly 35.1 μm of dimensional change.\u003c\/p\u003e\n\u003cp\u003eFor another 0\"–12\" configuration, see the Mitutoyo 505-748.\u003c\/p\u003e\n\u003cp\u003eKey Benefits\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eOutside, inside, depth and step measurement in one tool\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOD carbide-tipped jaws designed to resist wear\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0.001\" graduation for fine dimensional readings\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e±0.002\" stated accuracy\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClear analogue dial with no batteries or electronic display\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHardened stainless steel construction for workshop durability\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eApproximately 370 g weight for convenient handling\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMitutoyo 505 series design for everyday dimensional inspection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWho This Product Is Best For\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMachinists and fitters requiring an everyday mechanical caliper\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQC inspectors who prefer analogue measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMaintenance teams in machine shops and industrial facilities\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePower and desalination plant maintenance teams\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOil and gas service contractors\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTraining centres and apprentices learning mechanical measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBuyers requiring carbide-tipped outside jaws for repeated dimensional inspection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHow to Use the Dial Caliper\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eClean the measuring faces and close the jaws gently.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCheck the dial zero before beginning the measurement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOpen the jaws beyond the feature being measured.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePosition the appropriate jaws against the workpiece.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eKeep the caliper square and properly aligned with the part.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently without excessive measuring force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the whole-unit measurement from the main scale and the fractional measurement from the dial.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUse the depth bar for depth measurements and the step surfaces for step dimensions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat range does the Mitutoyo 505-747 measure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures from 0\"–12\" (0–304.8 mm).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the graduation and accuracy?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-747 has a 0.001\" graduation and stated accuracy of ±0.002\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure inside and depth dimensions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The caliper measures outside, inside, depth and step dimensions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are carbide-tipped jaws for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe carbide tips on the outside measuring jaws are designed to resist wear from abrasive or hardened materials, helping maintain the condition of the measuring faces during repeated use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose a dial caliper instead of a digital caliper?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-747 uses a mechanical analogue dial and does not require batteries or an electronic display. This can be useful in workshop environments where a mechanical measuring instrument is preferred.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Mitutoyo model should I choose if my required range differs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose a caliper whose measuring range covers the required dimension. The 505-747 covers 0\"–12\"; other 505 series models can be selected according to jaw configuration, graduation and application requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Mitutoyo 505-747 be recalibrated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Periodic calibration through an ISO\/IEC 17025-accredited calibration service can help maintain measurement traceability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I store and care for the caliper?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWipe the measuring surfaces clean after use, protect the instrument from coolant and direct sunlight, avoid impacts or drops, and check the zero position regularly. Periodic calibration should be scheduled according to your quality requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I order the Mitutoyo 505-747 in Kuwait?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePricing is quote-based. Call or WhatsApp \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e with the model number and required quantity, and General Tech Services LLC will confirm pricing and availability.\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170886619249,"sku":"505-747","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-dial-calipers-default-title-mitutoyo-505-747-dial-caliper-series-505-od-carbide-tipped-jaws-graduation-0-001-inch-accuracy-0-002-inch-range-0-to-12-inch-weight-370-g-25383318913137.jpg?v=1761744718"},{"product_id":"mitutoyo-505-748-dial-caliper-series-505-id-od-carbide-tipped-jaws-graduation-0-001-inch-accuracy-0-002-inch-range-0-to-12-inch-weight-370-g","title":"Mitutoyo 505-748 | Dial Caliper | 0-12 in, 0.001 in, ID\/OD carbide jaws","description":"\u003cp\u003e\u003cstrong\u003ePart No. 505-748 | Range 0\"–12\" (0–304.8 mm) | Graduation 0.001\" | Accuracy ±0.002\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduct Overview\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 505-748 dial caliper measures outside, inside, depth and step dimensions across a 0\"–12\" (0–304.8 mm) range. Its easy-to-read analogue dial provides 0.001\" graduation, while ID\/OD carbide-tipped jaws are designed to resist wear during regular inspection of abrasive and hardened materials.\u003c\/p\u003e\n\u003cp\u003eUnlike digital calipers, the 505-748 requires no battery or electronic display. Its mechanical dial provides an immediate reading for routine dimensional checks on the shop floor. The caliper has a stated accuracy of ±0.002\" and weighs approximately 370 g.\u003c\/p\u003e\n\u003cp\u003eStandard outside and inside measurement capability, a depth bar and step measurement function allow one tool to handle a broad range of everyday inspection tasks. It is suitable for machinists, QC inspectors, maintenance teams, CNC workshops, and oil and gas service operations across Kuwait.\u003c\/p\u003e\n\u003cp\u003eTemperature can affect dimensional measurements. Steel expands by approximately 11.5 μm per metre for every 1 °C change. For a 304.8 mm workpiece, a 10 °C temperature difference can produce roughly 35.1 μm of dimensional change. Allow the workpiece and Mitutoyo 505-748 to reach the same temperature before taking a final precision reading.\u003c\/p\u003e\n\u003cp\u003eKey Benefits\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eClear analogue dial reading with no battery required\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0\"–12\" measuring range for medium and large components\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOutside, inside, depth and step measurement in one caliper\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eID\/OD carbide-tipped jaws for improved wear resistance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0.001\" graduation for fine dimensional readings\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e±0.002\" stated accuracy\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHardened stainless steel construction for workshop durability\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eApproximately 370 g weight for convenient handling\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMitutoyo 505 series design for everyday dimensional inspection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWho This Product Is Best For\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMachinists and fitters requiring an everyday mechanical caliper\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQC inspectors who prefer analogue measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMaintenance teams in machine shops and industrial facilities\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCNC machine shops performing routine dimensional checks\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOil and gas maintenance and refinery service teams\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTraining centres and apprentices learning mechanical measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBuyers requiring carbide-tipped jaws for repeated inspection of harder or abrasive materials\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHow to Use the Dial Caliper\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eClean the measuring faces and close the jaws gently.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCheck the dial zero before beginning the measurement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOpen the jaws beyond the feature being measured.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePosition the appropriate jaws against the workpiece.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eKeep the caliper square and properly aligned with the part.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently without excessive measuring force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the whole-unit measurement from the main scale and the fractional measurement from the dial.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUse the depth bar for depth measurements and the step surfaces for step dimensions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat range does the Mitutoyo 505-748 measure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures from 0\"–12\" (0–304.8 mm).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the graduation and accuracy?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-748 has a 0.001\" graduation and stated accuracy of ±0.002\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure inside and depth dimensions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The caliper measures outside, inside, depth and step dimensions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are carbide-tipped jaws for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe carbide tips are designed to resist wear when measuring abrasive or hardened materials, helping maintain the condition of the measuring jaw faces over repeated use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose a dial caliper instead of a digital caliper?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-748 uses a mechanical analogue dial and does not require batteries or an electronic display. This can be useful for workshop environments where a mechanical measuring instrument is preferred.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Mitutoyo model should I choose if my required range differs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose a caliper whose measuring range covers the required dimension. The 505-748 covers 0\"–12\"; other 505 series models can be selected according to jaw configuration, graduation and application requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Mitutoyo 505-748 be recalibrated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Periodic calibration through an ISO\/IEC 17025-accredited calibration service can help maintain measurement traceability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I store and care for the caliper?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWipe the measuring surfaces clean after use, protect the instrument from coolant and direct sunlight, avoid impacts or drops, and check the zero position regularly. Periodic calibration should be scheduled according to your quality requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I order the Mitutoyo 505-748 in Kuwait?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePricing is quote-based. Call or WhatsApp \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e with the model number and required quantity, and General Tech Services LLC will confirm pricing and avail\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170886652017,"sku":"505-748","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-dial-calipers-default-title-mitutoyo-505-748-dial-caliper-series-505-id-od-carbide-tipped-jaws-graduation-0-001-inch-accuracy-0-002-inch-range-0-to-12-inch-weight-370-g-25383318945905.jpg?v=1761744718"},{"product_id":"mitutoyo-160-153-vernier-caliper-series-160-nib-style-jaw-graduation-0-02-mm-accuracy-0-05-mm-range-0-to-600-mm-weight-1400-g","title":"Mitutoyo 160-153 | Vernier Caliper | 0-600 mm, 0.02 mm, nib jaws","description":"\u003cp\u003e\u003cstrong\u003ePart No. 160-153 | Range 0–600 mm | Graduation 0.02 mm | Accuracy ±0.05 mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduct Overview\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 160-153 vernier caliper provides a 0–600 mm measuring range with 0.02 mm graduation and ±0.05 mm accuracy. Its extended range is designed for large flanges, shafts, fabricated components and other parts that exceed the capacity of standard 150 mm or 300 mm calipers.\u003c\/p\u003e\n\u003cp\u003eNib-style jaws allow both outside and inside measurements, including bores and slots. The long, rigid beam helps maintain stable jaw alignment across the measuring range, while the approximately 1400 g construction provides a solid feel during large-part inspection.\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 160-153 is suitable for fabrication and structural steel workshops, pipe and flange inspection teams, heavy machining operations, maintenance crews, and oil and gas service environments across Kuwait.\u003c\/p\u003e\n\u003cp\u003eTemperature can affect dimensional measurements on large steel components. Steel expands by approximately 11.5 μm per metre for every 1 °C change. For a 600 mm workpiece, a 10 °C temperature difference can therefore produce roughly 69.0 μm of dimensional change. Allow the workpiece and Mitutoyo 160-153 to reach the same temperature before taking a final precision reading.\u003c\/p\u003e\n\u003cp\u003eFor smaller parts requiring a shorter caliper, the Mitutoyo 505-745 covers 0–300 mm.\u003c\/p\u003e\n\u003cp\u003eKey Benefits\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e600 mm measuring range for large components\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNib-style jaws for outside and inside measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0.02 mm graduation for fine vernier readings\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e±0.05 mm accuracy for dimensional inspection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNo batteries required\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLong, rigid beam for stable measurement across the range\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSuitable for large flanges, pipes, shafts and fabricated parts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eApproximately 1400 g construction for a stable hand-held feel\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWho This Product Is Best For\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eFabrication and structural steel workshops\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePipe and flange inspection teams\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHeavy machining shops\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOil and gas maintenance teams\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRefinery and petrochemical shutdown crews\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMaintenance departments checking large components\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBuyers requiring a 600 mm mechanical caliper for parts beyond 300 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHow to Use the Vernier Caliper\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eClean the measuring faces and check the zero position.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOpen the jaws beyond the feature being measured.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePosition the jaws correctly against the workpiece.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eKeep the beam square and properly aligned with the part.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently without excessive measuring force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the whole-unit measurement from the main scale and the fractional measurement from the vernier.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFor inside measurements, use the nib-style jaw tips to contact the internal surfaces.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat range does the Mitutoyo 160-153 measure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures from 0 to 600 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the graduation and accuracy?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 160-153 has a 0.02 mm graduation and stated accuracy of ±0.05 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are nib-style jaws?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNib-style jaws have smaller jaw tips that allow the caliper to measure inside features such as bores and slots as well as outside dimensions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much does the Mitutoyo 160-153 weigh?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe supplied product information lists a weight of approximately 1400 g.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the 160-153 suitable for large flanges and fabricated parts?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Its 600 mm range and extended beam make it suitable for dimensional checks on large flanges, shafts, pipes, fabricated components and structural parts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Mitutoyo caliper should I use for parts under 300 mm?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA shorter caliper may be easier to handle for smaller components. The Mitutoyo 505-745 covers 0–300 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Mitutoyo 160-153 be recalibrated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Periodic calibration through an ISO\/IEC 17025-accredited calibration service can help maintain measurement traceability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I store and care for the caliper?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClean the measuring surfaces after use, protect the instrument from coolant and direct sunlight, avoid impacts or drops, and check the zero position regularly. Periodic calibration should be scheduled according to your quality requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I order the Mitutoyo 160-153 in Kuwait?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePricing is quote-based. Call or WhatsApp \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e with the model number and required quantity, and General Tech Services LLC will confirm pricing and availability.\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170886783089,"sku":"160-153","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-dial-calipers-default-title-mitutoyo-160-153-vernier-caliper-series-160-nib-style-jaw-graduation-0-02-mm-accuracy-0-05-mm-range-0-to-600-mm-weight-1400-g-25383319175281.jpg?v=1761744716"},{"product_id":"mitutoyo-505-732-dial-caliper-range-0-150mm","title":"Mitutoyo 505-732 Dial Caliper, Range 0-150mm","description":"\u003cp\u003e\u003cstrong\u003ePart No. 505-732 | Range 0–150 mm | Graduation 0.01 mm | 1 mm\/rev\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduct Overview\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 505-732 dial caliper measures outside, inside, depth and step dimensions across a 0–150 mm range with a clear, easy-to-read analogue dial and 0.01 mm graduation. It requires no batteries or electronic display, making it ready for everyday dimensional inspection.\u003c\/p\u003e\n\u003cp\u003eThe caliper is constructed from hardened stainless steel, with an ultra-smooth sliding mechanism and strong shock protection for dependable workshop use. Titanium coating on the sliding surfaces helps improve durability, while the bright yellow dial with large characters makes readings easier to see.\u003c\/p\u003e\n\u003cp\u003eStandard outside and inside jaws, a depth bar and step-measuring capability allow the Mitutoyo 505-732 to handle a wide range of routine dimensional checks. The dial provides 0.01 mm graduation with 1 mm per revolution.\u003c\/p\u003e\n\u003cp\u003eIt is suitable for QC inspectors, calibration laboratories, machinists, fitters, maintenance teams, and fabrication and machining workshops supporting Kuwait's oil, gas and utilities sectors.\u003c\/p\u003e\n\u003cp\u003eTemperature can affect close-tolerance measurements. Steel expands by approximately 11.5 μm per metre per °C. At 150 mm, a 10 °C temperature difference can produce approximately 17.2 μm of dimensional change. For critical measurements, allow the workpiece and caliper to reach the same temperature before taking the final reading.\u003c\/p\u003e\n\u003cp\u003eFor applications requiring a longer measuring range, consider the Mitutoyo 505-682 with a 0–200 mm range.\u003c\/p\u003e\n\u003cp\u003eKey Benefits\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e0.01 mm graduation for detailed dimensional inspection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1 mm dial travel per revolution\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClear analogue dial with no batteries or electronic display\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOutside, inside, depth and step measurement in one instrument\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUltra-smooth sliding for comfortable everyday operation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eShock-protected dial mechanism for demanding workshop environments\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTitanium-coated sliding surfaces for improved durability\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHardened stainless steel construction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBright yellow dial with large, easy-to-read characters\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBattery-free operation for dependable workshop availability\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMitutoyo 505 series design for general-purpose dimensional inspection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWho This Product Is Best For\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMachinists and fitters requiring a reliable everyday caliper\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQC inspectors who prefer an analogue dial reading\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCalibration laboratories requiring a mechanical measuring instrument\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMaintenance teams in oil and gas workshops\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFabrication and machining workshops\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUtilities and industrial maintenance teams\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTraining centres, technical institutes and apprentices\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBuyers looking for a battery-free alternative to digital calipers\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHow to Measure\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eClean the measuring jaws and workpiece before starting.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently and check that the dial is correctly zeroed.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOpen the jaws and position them around the feature being measured.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eKeep the caliper square and properly aligned with the measurement surface.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClose the jaws gently without excessive measuring force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the whole-unit value from the main scale and add the dial reading.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFor depth measurements, position the depth bar correctly against the reference surface.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAfter use, wipe the measuring faces clean and store the caliper safely in its case.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat range does the Mitutoyo 505-732 dial caliper measure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt measures dimensions from 0 to 150 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Mitutoyo 505-732 measure inside and depth dimensions?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. It provides outside, inside, depth and step measurement capability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the graduation of the Mitutoyo 505-732?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe graduation is 0.01 mm, with 1 mm of dial travel per revolution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose a dial caliper over a digital caliper?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 505-732 requires no batteries and has no electronic display. Its analogue dial provides a direct mechanical reading for routine dimensional checks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I read the dial on the 505-732?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRead the whole-unit measurement from the main beam scale and then add the corresponding dial reading. The 505-732 has 0.01 mm graduation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I choose between the Mitutoyo 505-730 and 505-732?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth models have a 0–150 mm range. The 505-730 has 0.02 mm graduation and 2 mm per revolution, while the 505-732 has finer 0.01 mm graduation and 1 mm per revolution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Mitutoyo 505-732 suitable for close-tolerance inspection?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIts 0.01 mm graduation provides a finer dial reading than a 0.02 mm model. For critical dimensional inspection, the instrument should be used within its applicable accuracy and calibration requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the Mitutoyo 505-732 be recalibrated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Periodic calibration through a qualified calibration service can help maintain measurement traceability where required by the user's quality system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I store and care for the 505-732?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWipe the measuring faces clean after use, store the instrument in its case away from direct sunlight and coolant, and avoid dropping or impacting it. Check the zero position regularly and arrange periodic calibration when traceability is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I order the Mitutoyo 505-732 dial caliper in Kuwait?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor pricing and availability, call or WhatsApp \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e with the model number and required quantity. General Tech Services LLC can confirm the current quotation and availability for Kuwait.\u003c\/p\u003e\n\u003cp\u003eRequest Pricing \u0026amp; Availability\u003c\/p\u003e\n\u003cp\u003eReady to order the Mitutoyo 505-732? Call or WhatsApp \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e for pricing and availability in Kuwait.\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42653818159217,"sku":"505-732","price":370.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-dial-calipers-default-title-mitutoyo-505-732-dial-caliper-range-0-150mm-25876927185009.jpg?v=1761743208"},{"product_id":"mitutoyo-dial-caliper-carbide-od-jaws-505-734","title":"Mitutoyo 505-734 | Dial Caliper, Carbide OD Jaws | 0-150 mm, 0.02 mm graduation","description":"\u003cp\u003e505-734 reads 0–150 mm on a dial, graduated in 0.02 mm and 2 mm\/rev; it has carbide-tipped jaws for OD measurement. Sliding is ultra-smooth with high shock protection, and the dial is easy to read thanks to its large characters; the depth bar is flat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eE MPE ±0.03 mm; S MPE ±0.05 mm.\u003c\/li\u003e\n\u003cli\u003eWeighs 175 g and is supplied with plastic box.\u003c\/li\u003e\n\u003cli\u003eRange of 0–150 mm in 0.02 mm steps.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":68213384708209,"sku":"505-734","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mtyn-505-734_202410_FS_1_jpg.webp?v=1793615795"},{"product_id":"mitutoyo-dial-caliper-carbide-od-jaws-505-735","title":"Mitutoyo 505-735 | Dial Caliper, Carbide OD Jaws | 0-150 mm, 0.02 mm graduation","description":"\u003cp\u003eThe 505-735 is a dial caliper for 0–150 mm with 0.02 mm graduation and 2mm\/rev, fitted with carbide-tipped jaws for ID and OD measurement. For the 505-735, sliding is ultra-smooth with high shock protection, and the dial is easy to read thanks to its large characters; the depth bar is flat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaximum permissible error: ±0.03 mm (E) and ±0.05 mm (S).\u003c\/li\u003e\n\u003cli\u003eMass 175 g; supplied with plastic box.\u003c\/li\u003e\n\u003cli\u003eMeasuring range 0–150 mm; graduation 0.02 mm.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":68213384740977,"sku":"505-735","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mtyn-505-735_202410_FS_1_jpg.webp?v=1793615795"},{"product_id":"mitutoyo-dial-caliper-inch-505-740j","title":"Mitutoyo 505-740J | Dial Caliper, Inch | 0-6 in, 0.001 in graduation","description":"\u003cp\u003e505-740J reads 0–6 in on a dial, graduated in 0.001 in. For the 505-740J, sliding is ultra-smooth with high shock protection, and the dial is easy to read thanks to its large characters; the depth bar is flat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eE MPE ±0.001 in; S MPE ±0.002 in.\u003c\/li\u003e\n\u003cli\u003eIncludes a thumb roller for slider movement.\u003c\/li\u003e\n\u003cli\u003eA locking screw secures the slider.\u003c\/li\u003e\n\u003cli\u003eWeighs 175 g and is supplied with plastic box (505-740J).\u003c\/li\u003e\n\u003cli\u003eRange of 0–6 in in 0.001 in steps.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":68213384806513,"sku":"505-740J","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mtyn-505-740j_jpg.webp?v=1793615796"},{"product_id":"mitutoyo-dial-caliper-inch-505-741j","title":"Mitutoyo 505-741J | Dial Caliper, Inch | 0-8 in, 0.001 in graduation","description":"\u003cp\u003eThe 505-741J is a inch dial caliper for 0–8 in with 0.001 in graduation. For the 505-741J, sliding is ultra-smooth with high shock protection, and the dial is easy to read thanks to its large characters; the depth bar is flat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaximum permissible error: ±0.002 in (E) and ±0.0025 in (S).\u003c\/li\u003e\n\u003cli\u003eThumb roller fitted.\u003c\/li\u003e\n\u003cli\u003eLocking screw fitted.\u003c\/li\u003e\n\u003cli\u003eMass 185 g; supplied with plastic box.\u003c\/li\u003e\n\u003cli\u003eMeasuring range 0–8 in; graduation 0.001 in.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":68213384839281,"sku":"505-741J","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mtyn-505-741J_202410_FS_1_jpg.webp?v=1793615795"}],"url":"https:\/\/www.generaltechkuwait.com\/collections\/measurement-dial-calipers.oembed","provider":"General Tech Services LLC","version":"1.0","type":"link"}