{"title":"Flowmeters","description":null,"products":[{"product_id":"barton-7183-rf-meter-meter-size-3-8-inch-end-connection-size-1-inch-flow-rate-0-45-4-us-gpm","title":"Barton 7183 RF meter, meter Size :3\/8 inch,End Connection Size :1 inch,Flow Rate :0.45-4 US GPM","description":"\u003cp\u003e\u003cstrong\u003eModel 7183 · 3\/8\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Barton 7183 is a 3\/8\" liquid turbine flow meter from Barton's Model 7100 range, listed for 0.45-4 US GPM. It suits low-viscosity liquids including hydrocarbons. Genuine Barton stock at General Tech Services LLC, UAE, with free UAE-wide shipping. Request a quote in under a minute - call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: 7183\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eContact Number: +971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall liquid lines, such as chemical injection, additive dosing and sample streams, carry flows too low for most meters to read well. The Barton 7183 is a 3\/8\" turbine meter listed for 0.45-4 US GPM, sized for this type of low-flow duty.\u003c\/p\u003e\n\u003cp\u003eA turbine flow meter places a balanced rotor in the liquid stream. Flow turns the rotor at a speed proportional to flow rate, and a pickup coil on the meter body senses each passing blade tip, producing a pulse signal. Counting the pulses gives volume, and their frequency gives flow rate. The rotor is the only moving part.\u003c\/p\u003e\n\u003cp\u003eThe Barton 7183 belongs to Barton's Model 7100 line, which covers 3\/8 to 8 inch meters. Model 7100 meters use wear-resistant tungsten carbide sleeve bearings, which need no lubrication and stand up to demanding service.\u003c\/p\u003e\n\u003cp\u003eBarton's 7000 series uses a symmetrical bidirectional design, so it can measure flow in either direction where capacities are the same both ways.\u003c\/p\u003e\n\u003cp\u003eBarton's published series data gives linearity of ±1% of reading over the flow range for meters smaller than 1 inch and repeatability of ±0.02% of reading. For accurate results, install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream. Confirm materials, pressure rating and electronics against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003cp\u003eNeed a different size or model line? Compare the Barton 7184 (1\/2\", 0.88-8.2 US GPM) or Barton 7283 (3\/8\", 0.5-5 US GPM).\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e3\/8\" meter listed for 0.45-4 US GPM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRotor is the only moving part, keeping maintenance simple\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTungsten carbide sleeve bearings for long service life\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBidirectional design measures flow in either direction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePulse output adapts readily to many flow computers and readouts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eContact Details\u003c\/h3\u003e\n\u003cp\u003eGeneral Tech Services LLC supplies genuine Barton stock in the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for pricing, stock availability and lead time.\u003c\/p\u003e\n\u003ch3\u003eWho This Product Is Best For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eChemical injection and additive dosing lines\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow-flow hydrocarbon and process liquid measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReplacing an existing small-bore Barton 7000 meter\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Specify \u0026amp; Install It\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eCheck that your normal and maximum flow fall within 0.45-4 US GPM and that your liquid suits a turbine meter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInstall the meter in straight pipe of the same diameter, with at least 10 diameters of straight run upstream, as specified by Barton.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConnect the pickup coil to your flow computer or readout and enter the meter's K-factor from its calibration certificate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConfirm the meter materials, pressure rating and electronics against the Barton datasheet and your process requirements before ordering.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVerify the installation and flow direction requirements before putting the meter into service.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow does a turbine flow meter work?\u003c\/strong\u003e\u003cbr\u003eLiquid turns a balanced rotor; a pickup coil senses each blade and produces pulses in proportion to flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich liquids suit the Barton 7183?\u003c\/strong\u003e\u003cbr\u003eBarton's 7000 series is designed for low-viscosity liquids, including hydrocarbon liquids. Confirm viscosity and compatibility with our team.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Barton 7183?\u003c\/strong\u003e\u003cbr\u003eBarton's series data gives linearity of ±1% of reading over the flow range for meters smaller than 1 inch and repeatability of ±0.02% of reading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the meter need straight pipe?\u003c\/strong\u003e\u003cbr\u003eYes. Barton specifies straight pipe of the same diameter with at least 10 diameters upstream for accurate operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose the 7183 or another size?\u003c\/strong\u003e\u003cbr\u003eSize the meter to your flow, not simply the pipe size. The 7183 is listed for 0.45-4 US GPM. For higher flows, see the Barton 7184. Contact our team to confirm the best option.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure reverse flow?\u003c\/strong\u003e\u003cbr\u003eThe 7000 series has a symmetrical bidirectional design, and electronic options can sense flow direction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs genuine Barton stock available with UAE shipping?\u003c\/strong\u003e\u003cbr\u003eYes. Genuine Barton stock ships free across the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for current pricing and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e","brand":"Barton","offers":[{"title":"Default Title","offer_id":42170170867825,"sku":"TFM\/7183\/3\/8 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/barton-turbine-flow-meters-default-title-barton-7183-rf-meter-meter-size-3-8-inch-end-connection-size-1-inch-flow-rate-0-45-4-us-gpm-25381831704689.jpg?v=1761752379"},{"product_id":"barton-7184-rf-meter-meter-size-1-2-inch-end-connection-size-1-inch-flow-rate-0-88-8-2-us-gpm","title":"Barton 7184 RF meter,meter  Size :1\/2 inch,End Connection Size :1 inch,Flow Rate :0.88-8.2 US GPM","description":"\u003cp\u003e\u003cstrong\u003eModel 7184 · 1\/2\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Barton 7184 is a 1\/2\" liquid turbine flow meter from Barton's Model 7100 range, listed for 0.88-8.2 US GPM. It suits low-viscosity liquids including hydrocarbons. Genuine Barton stock at General Tech Services LLC, UAE, with free UAE-wide shipping. Request a quote in under a minute - call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: 7184\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eContact Number: +971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall liquid lines, such as chemical injection, additive dosing and sample streams, carry flows too low for most meters to read well. The Barton 7184 is a 1\/2\" turbine meter listed for 0.88-8.2 US GPM, sized for this type of low-flow duty.\u003c\/p\u003e\n\u003cp\u003eA turbine flow meter places a balanced rotor in the liquid stream. Flow turns the rotor at a speed proportional to flow rate, and a pickup coil on the meter body senses each passing blade tip, producing a pulse signal. Counting the pulses gives volume, and their frequency gives flow rate. The rotor is the only moving part.\u003c\/p\u003e\n\u003cp\u003eThe Barton 7184 belongs to Barton's Model 7100 line, which covers 3\/8 to 8 inch meters. Model 7100 meters use wear-resistant tungsten carbide sleeve bearings, which need no lubrication and stand up to demanding service.\u003c\/p\u003e\n\u003cp\u003eBarton's 7000 series uses a symmetrical bidirectional design, so it can measure flow in either direction where capacities are the same both ways.\u003c\/p\u003e\n\u003cp\u003eBarton's published series data gives linearity of ±1% of reading over the flow range for meters smaller than 1 inch and repeatability of ±0.02% of reading. For accurate results, install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream. Confirm materials, pressure rating and electronics against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003cp\u003eNeed a different size or model line? Compare the Barton 7183 (3\/8\", 0.45-4 US GPM), Barton 7185 (5\/8\", 1.6-16 US GPM), or Barton 7284 (1\/2\", 1-10 US GPM).\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e1\/2\" meter listed for 0.88-8.2 US GPM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRotor is the only moving part, keeping maintenance simple\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTungsten carbide sleeve bearings for long service life\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBidirectional design measures flow in either direction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePulse output adapts readily to many flow computers and readouts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eContact Details\u003c\/h3\u003e\n\u003cp\u003eGeneral Tech Services LLC supplies genuine Barton stock in the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for pricing, stock availability and lead time.\u003c\/p\u003e\n\u003ch3\u003eWho This Product Is Best For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eChemical injection and additive dosing lines\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow-flow hydrocarbon and process liquid measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReplacing an existing small-bore Barton 7000 meter\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Specify \u0026amp; Install It\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eCheck that your normal and maximum flow fall within 0.88-8.2 US GPM and that your liquid suits a turbine meter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInstall the meter in straight pipe of the same diameter, with at least 10 diameters of straight run upstream, as specified by Barton.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConnect the pickup coil to your flow computer or readout and enter the meter's K-factor from its calibration certificate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConfirm the meter materials, pressure rating and electronics against the Barton datasheet and your process requirements before ordering.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVerify the installation and flow direction requirements before putting the meter into service.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow does a turbine flow meter work?\u003c\/strong\u003e\u003cbr\u003eLiquid turns a balanced rotor; a pickup coil senses each blade and produces pulses in proportion to flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich liquids suit the Barton 7184?\u003c\/strong\u003e\u003cbr\u003eBarton's 7000 series is designed for low-viscosity liquids, including hydrocarbon liquids. Confirm viscosity and compatibility with our team.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Barton 7184?\u003c\/strong\u003e\u003cbr\u003eBarton's series data gives linearity of ±1% of reading over the flow range for meters smaller than 1 inch and repeatability of ±0.02% of reading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the meter need straight pipe?\u003c\/strong\u003e\u003cbr\u003eYes. Barton specifies straight pipe of the same diameter with at least 10 diameters upstream for accurate operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose the 7184 or another size?\u003c\/strong\u003e\u003cbr\u003eSize the meter to your flow, not simply the pipe size. The 7184 is listed for 0.88-8.2 US GPM. For lower flows, see the Barton 7183. For higher flows, see the Barton 7185. Contact our team to confirm the best option.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure reverse flow?\u003c\/strong\u003e\u003cbr\u003eThe 7000 series has a symmetrical bidirectional design, and electronic options can sense flow direction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs genuine Barton stock available with UAE shipping?\u003c\/strong\u003e\u003cbr\u003eYes. Genuine Barton stock ships free across the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for current pricing and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e","brand":"Barton","offers":[{"title":"Default Title","offer_id":42170170900593,"sku":"TFM\/7184\/1\/2 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/barton-turbine-flow-meters-default-title-barton-7184-rf-meter-meter-size-1-2-inch-end-connection-size-1-inch-flow-rate-0-88-8-2-us-gpm-25381831966833.jpg?v=1761752378"},{"product_id":"barton-7185-rf-meter-meter-size-5-8-inch-end-connection-size-1-inch-flow-rate-1-6-16-us-gpm","title":"Barton 7185 RF meter, meter Size :5\/8 inch,End Connection Size :1 inch,Flow Rate :1.6-16 US GPM","description":"\u003cp\u003e\u003cstrong\u003eModel 7185 · 5\/8\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Barton 7185 is a 5\/8\" liquid turbine flow meter from Barton's Model 7100 range, listed for 1.6-16 US GPM. It suits low-viscosity liquids including hydrocarbons. Genuine Barton stock at General Tech Services LLC, UAE, with free UAE-wide shipping. Request a quote in under a minute - call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: 7185\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eContact Number: +971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall liquid lines, such as chemical injection, additive dosing and sample streams, carry flows too low for most meters to read well. The Barton 7185 is a 5\/8\" turbine meter listed for 1.6-16 US GPM, sized for this type of low-flow duty.\u003c\/p\u003e\n\u003cp\u003eA turbine flow meter places a balanced rotor in the liquid stream. Flow turns the rotor at a speed proportional to flow rate, and a pickup coil on the meter body senses each passing blade tip, producing a pulse signal. Counting the pulses gives volume, and their frequency gives flow rate. The rotor is the only moving part.\u003c\/p\u003e\n\u003cp\u003eThe Barton 7185 belongs to Barton's Model 7100 line, which covers 3\/8 to 8 inch meters. Model 7100 meters use wear-resistant tungsten carbide sleeve bearings, which need no lubrication and stand up to demanding service.\u003c\/p\u003e\n\u003cp\u003eBarton's 7000 series uses a symmetrical bidirectional design, so it can measure flow in either direction where capacities are the same both ways.\u003c\/p\u003e\n\u003cp\u003eBarton's published series data gives linearity of ±1% of reading over the flow range for meters smaller than 1 inch and repeatability of ±0.02% of reading. For accurate results, install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream. Confirm materials, pressure rating and electronics against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003cp\u003eNeed a different size or model line? Compare the Barton 7184 (1\/2\", 0.88-8.2 US GPM), Barton 7186 (3\/4\", 2.3-23 US GPM), or Barton 7285 (5\/8\", 1.6-16 US GPM).\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e5\/8\" meter listed for 1.6-16 US GPM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRotor is the only moving part, keeping maintenance simple\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTungsten carbide sleeve bearings for long service life\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBidirectional design measures flow in either direction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePulse output adapts readily to many flow computers and readouts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eContact Details\u003c\/h3\u003e\n\u003cp\u003eGeneral Tech Services LLC supplies genuine Barton stock in the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for pricing, stock availability and lead time.\u003c\/p\u003e\n\u003ch3\u003eWho This Product Is Best For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eChemical injection and additive dosing lines\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow-flow hydrocarbon and process liquid measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReplacing an existing small-bore Barton 7000 meter\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Specify \u0026amp; Install It\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eCheck that your normal and maximum flow fall within 1.6-16 US GPM and that your liquid suits a turbine meter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInstall the meter in straight pipe of the same diameter, with at least 10 diameters of straight run upstream, as specified by Barton.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConnect the pickup coil to your flow computer or readout and enter the meter's K-factor from its calibration certificate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConfirm the meter materials, pressure rating and electronics against the Barton datasheet and your process requirements before ordering.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVerify the installation and flow direction requirements before putting the meter into service.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow does a turbine flow meter work?\u003c\/strong\u003e\u003cbr\u003eLiquid turns a balanced rotor; a pickup coil senses each blade and produces pulses in proportion to flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich liquids suit the Barton 7185?\u003c\/strong\u003e\u003cbr\u003eBarton's 7000 series is designed for low-viscosity liquids, including hydrocarbon liquids. Confirm viscosity and compatibility with our team.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Barton 7185?\u003c\/strong\u003e\u003cbr\u003eBarton's series data gives linearity of ±1% of reading over the flow range for meters smaller than 1 inch and repeatability of ±0.02% of reading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the meter need straight pipe?\u003c\/strong\u003e\u003cbr\u003eYes. Barton specifies straight pipe of the same diameter with at least 10 diameters upstream for accurate operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose the 7185 or another size?\u003c\/strong\u003e\u003cbr\u003eSize the meter to your flow, not simply the pipe size. The 7185 is listed for 1.6-16 US GPM. For lower flows, see the Barton 7184. For higher flows, see the Barton 7186. Contact our team to confirm the best option.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure reverse flow?\u003c\/strong\u003e\u003cbr\u003eThe 7000 series has a symmetrical bidirectional design, and electronic options can sense flow direction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs genuine Barton stock available with UAE shipping?\u003c\/strong\u003e\u003cbr\u003eYes. Genuine Barton stock ships free across the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for current pricing and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e","brand":"Barton","offers":[{"title":"Default Title","offer_id":42170170966129,"sku":"TFM\/7185\/5\/8 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/barton-turbine-flow-meters-default-title-barton-7185-rf-meter-meter-size-5-8-inch-end-connection-size-1-inch-flow-rate-1-6-16-us-gpm-25381832097905.jpg?v=1761752377"},{"product_id":"barton-7186-rf-meter-meter-size-3-4-inch-end-connection-size-1-inch-flow-rate-2-3-23-us-gpm","title":"Barton 7186 RF meter, meter Size :3\/4 inch,End Connection Size :1 inch,Flow Rate :2.3-23 US GPM","description":"\u003cp\u003e\u003cstrong\u003eModel 7186 · 3\/4\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Barton 7186 is a 3\/4\" liquid turbine flow meter from Barton's Model 7100 range, listed for 2.3-23 US GPM. It suits low-viscosity liquids including hydrocarbons. Genuine Barton stock at General Tech Services LLC, UAE, with free UAE-wide shipping. Request a quote in under a minute - call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: 7186\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eContact Number: +971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall liquid lines, such as chemical injection, additive dosing and sample streams, carry flows too low for most meters to read well. The Barton 7186 is a 3\/4\" turbine meter listed for 2.3-23 US GPM, sized for this type of low-flow duty.\u003c\/p\u003e\n\u003cp\u003eA turbine flow meter places a balanced rotor in the liquid stream. Flow turns the rotor at a speed proportional to flow rate, and a pickup coil on the meter body senses each passing blade tip, producing a pulse signal. Counting the pulses gives volume, and their frequency gives flow rate. The rotor is the only moving part.\u003c\/p\u003e\n\u003cp\u003eThe Barton 7186 belongs to Barton's Model 7100 line, which covers 3\/8 to 8 inch meters. Model 7100 meters use wear-resistant tungsten carbide sleeve bearings, which need no lubrication and stand up to demanding service.\u003c\/p\u003e\n\u003cp\u003eBarton's 7000 series uses a symmetrical bidirectional design, so it can measure flow in either direction where capacities are the same both ways.\u003c\/p\u003e\n\u003cp\u003eBarton's published series data gives linearity of ±1% of reading over the flow range for meters smaller than 1 inch and repeatability of ±0.02% of reading. For accurate results, install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream. Confirm materials, pressure rating and electronics against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003cp\u003eNeed a different size or model line? Compare the Barton 7185 (5\/8\", 1.6-16 US GPM), Barton 7101 (1\", 5-50 US GPM), or Barton 7286 (3\/4\", 2.3-23 US GPM).\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e3\/4\" meter listed for 2.3-23 US GPM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRotor is the only moving part, keeping maintenance simple\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTungsten carbide sleeve bearings for long service life\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBidirectional design measures flow in either direction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePulse output adapts readily to many flow computers and readouts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eContact Details\u003c\/h3\u003e\n\u003cp\u003eGeneral Tech Services LLC supplies genuine Barton stock in the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for pricing, stock availability and lead time.\u003c\/p\u003e\n\u003ch3\u003eWho This Product Is Best For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eChemical injection and additive dosing lines\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow-flow hydrocarbon and process liquid measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReplacing an existing small-bore Barton 7000 meter\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Specify \u0026amp; Install It\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eCheck that your normal and maximum flow fall within 2.3-23 US GPM and that your liquid suits a turbine meter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInstall the meter in straight pipe of the same diameter, with at least 10 diameters of straight run upstream, as specified by Barton.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConnect the pickup coil to your flow computer or readout and enter the meter's K-factor from its calibration certificate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConfirm the meter materials, pressure rating and electronics against the Barton datasheet and your process requirements before ordering.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVerify the installation and flow direction requirements before putting the meter into service.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow does a turbine flow meter work?\u003c\/strong\u003e\u003cbr\u003eLiquid turns a balanced rotor; a pickup coil senses each blade and produces pulses in proportion to flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich liquids suit the Barton 7186?\u003c\/strong\u003e\u003cbr\u003eBarton's 7000 series is designed for low-viscosity liquids, including hydrocarbon liquids. Confirm viscosity and compatibility with our team.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Barton 7186?\u003c\/strong\u003e\u003cbr\u003eBarton's series data gives linearity of ±1% of reading over the flow range for meters smaller than 1 inch and repeatability of ±0.02% of reading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the meter need straight pipe?\u003c\/strong\u003e\u003cbr\u003eYes. Barton specifies straight pipe of the same diameter with at least 10 diameters upstream for accurate operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose the 7186 or another size?\u003c\/strong\u003e\u003cbr\u003eSize the meter to your flow, not simply the pipe size. The 7186 is listed for 2.3-23 US GPM. For lower flows, see the Barton 7185. For higher flows, see the Barton 7101. Contact our team to confirm the best option.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure reverse flow?\u003c\/strong\u003e\u003cbr\u003eThe 7000 series has a symmetrical bidirectional design, and electronic options can sense flow direction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs genuine Barton stock available with UAE shipping?\u003c\/strong\u003e\u003cbr\u003eYes. Genuine Barton stock ships free across the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for current pricing and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e","brand":"Barton","offers":[{"title":"Default Title","offer_id":42170170998897,"sku":"TFM\/7186\/3\/4 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/barton-turbine-flow-meters-default-title-barton-7186-rf-meter-meter-size-3-4-inch-end-connection-size-1-inch-flow-rate-2-3-23-us-gpm-25381832196209.jpg?v=1761752377"},{"product_id":"barton-7101-rf-meter-meter-size-1-inch-end-connection-size-1-inch-flow-rate-5-50-us-gpm","title":"Barton 7101 RF meter, meter Size :1 inch,End Connection Size :1 inch,Flow Rate :5-50 US GPM","description":"\u003cp\u003e\u003cstrong\u003eModel 7101 · 1\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Barton 7101 is a 1\" liquid turbine flow meter from Barton's Model 7100 range, listed for 5-50 US GPM. It suits low-viscosity liquids including hydrocarbons. Genuine Barton stock at General Tech Services LLC, UAE, with free UAE-wide shipping. Request a quote in under a minute - call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: 7101\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eContact Number: +971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMid-size liquid lines in production, process and transfer service need a meter that reads accurately across a wide flow range. The Barton 7101 is a 1\" turbine meter listed for 5-50 US GPM.\u003c\/p\u003e\n\u003cp\u003eA turbine flow meter places a balanced rotor in the liquid stream. Flow turns the rotor at a speed proportional to flow rate, and a pickup coil on the meter body senses each passing blade tip, producing a pulse signal. Counting the pulses gives volume, and their frequency gives flow rate. The rotor is the only moving part.\u003c\/p\u003e\n\u003cp\u003eThe Barton 7101 belongs to Barton's Model 7100 line, which covers 3\/8 to 8 inch meters. Model 7100 meters use wear-resistant tungsten carbide sleeve bearings, which need no lubrication and stand up to demanding service.\u003c\/p\u003e\n\u003cp\u003eBarton's 7000 series uses a symmetrical bidirectional design, so it can measure flow in either direction where capacities are the same both ways.\u003c\/p\u003e\n\u003cp\u003eBarton's published series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading. For accurate results, install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream. Confirm materials, pressure rating and electronics against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003cp\u003eNeed a different size or model line? Compare the Barton 7186 (3\/4\", 2.3-23 US GPM), Barton 7145 (1-1\/4\", 10-80 US GPM), or Barton 7201 (1\", 5-50 US GPM).\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e1\" meter listed for 5-50 US GPM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRotor is the only moving part, keeping maintenance simple\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTungsten carbide sleeve bearings for long service life\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBidirectional design measures flow in either direction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePulse output adapts readily to many flow computers and readouts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eContact Details\u003c\/h3\u003e\n\u003cp\u003eGeneral Tech Services LLC supplies genuine Barton stock in the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for pricing, stock availability and lead time.\u003c\/p\u003e\n\u003ch3\u003eWho This Product Is Best For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eProduction, process and transfer lines in oil and gas\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow-viscosity liquid measurement where accuracy matters\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReplacing an existing Barton 7000 meter like-for-like\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Specify \u0026amp; Install It\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eCheck that your normal and maximum flow fall within 5-50 US GPM and that your liquid suits a turbine meter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInstall the meter in straight pipe of the same diameter, with at least 10 diameters of straight run upstream, as specified by Barton.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConnect the pickup coil to your flow computer or readout and enter the meter's K-factor from its calibration certificate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConfirm the meter materials, pressure rating and electronics against the Barton datasheet and your process requirements before ordering.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVerify the installation and flow direction requirements before putting the meter into service.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow does a turbine flow meter work?\u003c\/strong\u003e\u003cbr\u003eLiquid turns a balanced rotor; a pickup coil senses each blade and produces pulses in proportion to flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich liquids suit the Barton 7101?\u003c\/strong\u003e\u003cbr\u003eBarton's 7000 series is designed for low-viscosity liquids, including hydrocarbon liquids. Confirm viscosity and compatibility with our team.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Barton 7101?\u003c\/strong\u003e\u003cbr\u003eBarton's series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the meter need straight pipe?\u003c\/strong\u003e\u003cbr\u003eYes. Barton specifies straight pipe of the same diameter with at least 10 diameters upstream for accurate operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose the 7101 or another size?\u003c\/strong\u003e\u003cbr\u003eSize the meter to your flow, not simply the pipe size. The 7101 is listed for 5-50 US GPM. For lower flows, see the Barton 7186. For higher flows, see the Barton 7145. Contact our team to confirm the best option.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure reverse flow?\u003c\/strong\u003e\u003cbr\u003eThe 7000 series has a symmetrical bidirectional design, and electronic options can sense flow direction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs genuine Barton stock available with UAE shipping?\u003c\/strong\u003e\u003cbr\u003eYes. Genuine Barton stock ships free across the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for current pricing and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e","brand":"Barton","offers":[{"title":"Default Title","offer_id":42170171064433,"sku":"TFM\/7101\/1 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/barton-turbine-flow-meters-default-title-barton-7101-rf-meter-meter-size-1-inch-end-connection-size-1-inch-flow-rate-5-50-us-gpm-25381832261745.jpg?v=1761752376"},{"product_id":"barton-7145-rf-meter-meter-size-1-1-4-inch-end-connection-size-1-inch-flow-rate-10-80-us-gpm","title":"Barton 7145 RF meter, meter Size :1-1\/4 inch,End Connection Size :1 inch,Flow Rate :10-80 US GPM","description":"\u003cp\u003e\u003cstrong\u003eModel 7145 · 1-1\/4\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Barton 7145 is a 1-1\/4\" liquid turbine flow meter from Barton's Model 7100 range, listed for 10-80 US GPM. It suits low-viscosity liquids including hydrocarbons. Genuine Barton stock at General Tech Services LLC, UAE, with free UAE-wide shipping. Request a quote in under a minute - call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: 7145\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eContact Number: +971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMid-size liquid lines in production, process and transfer service need a meter that reads accurately across a wide flow range. The Barton 7145 is a 1-1\/4\" turbine meter listed for 10-80 US GPM.\u003c\/p\u003e\n\u003cp\u003eA turbine flow meter places a balanced rotor in the liquid stream. Flow turns the rotor at a speed proportional to flow rate, and a pickup coil on the meter body senses each passing blade tip, producing a pulse signal. Counting the pulses gives volume, and their frequency gives flow rate. The rotor is the only moving part.\u003c\/p\u003e\n\u003cp\u003eThe Barton 7145 belongs to Barton's Model 7100 line, which covers 3\/8 to 8 inch meters. Model 7100 meters use wear-resistant tungsten carbide sleeve bearings, which need no lubrication and stand up to demanding service.\u003c\/p\u003e\n\u003cp\u003eBarton's 7000 series uses a symmetrical bidirectional design, so it can measure flow in either direction where capacities are the same both ways.\u003c\/p\u003e\n\u003cp\u003eBarton's published series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading. For accurate results, install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream. Confirm materials, pressure rating and electronics against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003cp\u003eNeed a different size or model line? Compare the Barton 7101 (1\", 5-50 US GPM), Barton 7146 (1-1\/2\", 13-130 US GPM), or Barton 7245 (1-1\/4\", 6-90 US GPM).\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e1-1\/4\" meter listed for 10-80 US GPM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRotor is the only moving part, keeping maintenance simple\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTungsten carbide sleeve bearings for long service life\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBidirectional design measures flow in either direction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePulse output adapts readily to many flow computers and readouts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eContact Details\u003c\/h3\u003e\n\u003cp\u003eGeneral Tech Services LLC supplies genuine Barton stock in the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for pricing, stock availability and lead time.\u003c\/p\u003e\n\u003ch3\u003eWho This Product Is Best For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eProduction, process and transfer lines in oil and gas\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow-viscosity liquid measurement where accuracy matters\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReplacing an existing Barton 7000 meter like-for-like\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Specify \u0026amp; Install It\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eCheck that your normal and maximum flow fall within 10-80 US GPM and that your liquid suits a turbine meter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInstall the meter in straight pipe of the same diameter, with at least 10 diameters of straight run upstream, as specified by Barton.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConnect the pickup coil to your flow computer or readout and enter the meter's K-factor from its calibration certificate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConfirm the meter materials, pressure rating and electronics against the Barton datasheet and your process requirements before ordering.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVerify the installation and flow direction requirements before putting the meter into service.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow does a turbine flow meter work?\u003c\/strong\u003e\u003cbr\u003eLiquid turns a balanced rotor; a pickup coil senses each blade and produces pulses in proportion to flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich liquids suit the Barton 7145?\u003c\/strong\u003e\u003cbr\u003eBarton's 7000 series is designed for low-viscosity liquids, including hydrocarbon liquids. Confirm viscosity and compatibility with our team.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Barton 7145?\u003c\/strong\u003e\u003cbr\u003eBarton's series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the meter need straight pipe?\u003c\/strong\u003e\u003cbr\u003eYes. Barton specifies straight pipe of the same diameter with at least 10 diameters upstream for accurate operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose the 7145 or another size?\u003c\/strong\u003e\u003cbr\u003eSize the meter to your flow, not simply the pipe size. The 7145 is listed for 10-80 US GPM. For lower flows, see the Barton 7101. For higher flows, see the Barton 7146. Contact our team to confirm the best option.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure reverse flow?\u003c\/strong\u003e\u003cbr\u003eThe 7000 series has a symmetrical bidirectional design, and electronic options can sense flow direction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs genuine Barton stock available with UAE shipping?\u003c\/strong\u003e\u003cbr\u003eYes. Genuine Barton stock ships free across the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for current pricing and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e","brand":"Barton","offers":[{"title":"Default Title","offer_id":42170171162737,"sku":"TFM\/7145\/1-1\/4 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/barton-turbine-flow-meters-default-title-barton-7145-rf-meter-meter-size-1-1-4-inch-end-connection-size-1-inch-flow-rate-10-80-us-gpm-25381832392817.jpg?v=1761752375"},{"product_id":"barton-7146-rf-meter-meter-size-1-1-2-inch-end-connection-size-1-inch-flow-rate-13-130-us-gpm","title":"Barton 7146 RF meter, meter Size :1-1\/2 inch,End Connection Size :1 inch,Flow Rate :13-130 US GPM","description":"\u003cp\u003e\u003cstrong\u003eModel 7146 · 1-1\/2\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Barton 7146 is a 1-1\/2\" liquid turbine flow meter from Barton's Model 7100 range, listed for 13-130 US GPM. It suits low-viscosity liquids including hydrocarbons. Genuine Barton stock at General Tech Services LLC, UAE, with free UAE-wide shipping. Request a quote in under a minute - call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: 7146\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eContact Number: +971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMid-size liquid lines in production, process and transfer service need a meter that reads accurately across a wide flow range. The Barton 7146 is a 1-1\/2\" turbine meter listed for 13-130 US GPM.\u003c\/p\u003e\n\u003cp\u003eA turbine flow meter places a balanced rotor in the liquid stream. Flow turns the rotor at a speed proportional to flow rate, and a pickup coil on the meter body senses each passing blade tip, producing a pulse signal. Counting the pulses gives volume, and their frequency gives flow rate. The rotor is the only moving part.\u003c\/p\u003e\n\u003cp\u003eThe Barton 7146 belongs to Barton's Model 7100 line, which covers 3\/8 to 8 inch meters. Model 7100 meters use wear-resistant tungsten carbide sleeve bearings, which need no lubrication and stand up to demanding service.\u003c\/p\u003e\n\u003cp\u003eBarton's 7000 series uses a symmetrical bidirectional design, so it can measure flow in either direction where capacities are the same both ways.\u003c\/p\u003e\n\u003cp\u003eBarton's published series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading. For accurate results, install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream. Confirm materials, pressure rating and electronics against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003cp\u003eNeed a different size or model line? Compare the Barton 7145 (1-1\/4\", 10-80 US GPM), Barton 7102 (2\", 24-240 US GPM), or Barton 7246 (1-1\/2\", 13-130 US GPM).\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e1-1\/2\" meter listed for 13-130 US GPM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRotor is the only moving part, keeping maintenance simple\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTungsten carbide sleeve bearings for long service life\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBidirectional design measures flow in either direction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePulse output adapts readily to many flow computers and readouts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eContact Details\u003c\/h3\u003e\n\u003cp\u003eGeneral Tech Services LLC supplies genuine Barton stock in the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for pricing, stock availability and lead time.\u003c\/p\u003e\n\u003ch3\u003eWho This Product Is Best For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eProduction, process and transfer lines in oil and gas\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow-viscosity liquid measurement where accuracy matters\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReplacing an existing Barton 7000 meter like-for-like\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Specify \u0026amp; Install It\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eCheck that your normal and maximum flow fall within 13-130 US GPM and that your liquid suits a turbine meter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInstall the meter in straight pipe of the same diameter, with at least 10 diameters of straight run upstream, as specified by Barton.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConnect the pickup coil to your flow computer or readout and enter the meter's K-factor from its calibration certificate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConfirm the meter materials, pressure rating and electronics against the Barton datasheet and your process requirements before ordering.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVerify the installation and flow direction requirements before putting the meter into service.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow does a turbine flow meter work?\u003c\/strong\u003e\u003cbr\u003eLiquid turns a balanced rotor; a pickup coil senses each blade and produces pulses in proportion to flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich liquids suit the Barton 7146?\u003c\/strong\u003e\u003cbr\u003eBarton's 7000 series is designed for low-viscosity liquids, including hydrocarbon liquids. Confirm viscosity and compatibility with our team.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Barton 7146?\u003c\/strong\u003e\u003cbr\u003eBarton's series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the meter need straight pipe?\u003c\/strong\u003e\u003cbr\u003eYes. Barton specifies straight pipe of the same diameter with at least 10 diameters upstream for accurate operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose the 7146 or another size?\u003c\/strong\u003e\u003cbr\u003eSize the meter to your flow, not simply the pipe size. The 7146 is listed for 13-130 US GPM. For lower flows, see the Barton 7145. For higher flows, see the Barton 7102. Contact our team to confirm the best option.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure reverse flow?\u003c\/strong\u003e\u003cbr\u003eThe 7000 series has a symmetrical bidirectional design, and electronic options can sense flow direction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs genuine Barton stock available with UAE shipping?\u003c\/strong\u003e\u003cbr\u003eYes. Genuine Barton stock ships free across the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for current pricing and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Barton","offers":[{"title":"Default Title","offer_id":42170171228273,"sku":"TFM\/7146\/1-1\/2 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/barton-turbine-flow-meters-default-title-barton-7146-rf-meter-meter-size-1-1-2-inch-end-connection-size-1-inch-flow-rate-13-130-us-gpm-25381832458353.jpg?v=1761752375"},{"product_id":"barton-7102-rf-meter-meter-size-2-inch-end-connection-size-1-inch-flow-rate-24-240-us-gpm","title":"Barton 7102 RF meter, meter Size :2 inch,End Connection Size :1 inch,Flow Rate :24-240 US GPM","description":"\u003cp\u003e\u003cstrong\u003eModel 7102 · 2\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Barton 7102 is a 2\" liquid turbine flow meter from Barton's Model 7100 range, listed for 24-240 US GPM. It suits low-viscosity liquids, including hydrocarbons. Genuine Barton stock at General Tech Services LLC, UAE, with free UAE-wide shipping. Request a quote in under a minute - call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e \u003cstrong\u003e7102\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eContact Number:\u003c\/strong\u003e \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMid-size liquid lines in production, process and transfer service need a meter that reads accurately across a wide flow range. The Barton 7102 is a 2\" turbine meter listed for 24-240 US GPM.\u003c\/p\u003e\n\u003cp\u003eA turbine flow meter places a balanced rotor in the liquid stream. Flow turns the rotor at a speed proportional to the flow rate, while a pickup coil on the meter body senses each passing blade tip and produces a pulse signal. Counting the pulses gives volume, and their frequency gives flow rate. The rotor is the only moving part.\u003c\/p\u003e\n\u003cp\u003eThe Barton 7102 belongs to Barton's Model 7100 line, which covers 3\/8\" to 8\" meters. Model 7100 meters use wear-resistant tungsten carbide sleeve bearings, which require no lubrication and are suited to demanding service. Barton's 7000 series uses a symmetrical bidirectional design, allowing it to measure flow in either direction where capacities are the same both ways.\u003c\/p\u003e\n\u003cp\u003eBarton's published series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading. For accurate results, install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream. Confirm materials, pressure rating and electronics against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003cp\u003eNeed a different size or model line? Compare the Barton 7146 (1-1\/2\", 13-130 US GPM), Barton 7125 (2-1\/2\", 44-440 US GPM) or Barton 7202 (2\", 24-240 US GPM).\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e2\" meter listed for 24-240 US GPM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRotor is the only moving part, keeping maintenance simple\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTungsten carbide sleeve bearings for demanding service\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBidirectional design measures flow in either direction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePickup coil pulse output adapts readily to many flow computers and readouts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGenuine Barton stock with free UAE-wide shipping\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eContact Details\u003c\/h3\u003e\n\u003cp\u003eGeneral Tech Services LLC supplies genuine Barton stock in the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for pricing, stock availability and lead time.\u003c\/p\u003e\n\u003ch3\u003eWho This Product Is Best For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eProduction, process and transfer lines in oil and gas\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow-viscosity liquid measurement where accuracy matters\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMid-size liquid flow measurement applications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReplacing an existing Barton 7000 meter like-for-like\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Specify \u0026amp; Install It\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eCheck that your normal and maximum flow fall within 24-240 US GPM and that your liquid is suitable for a turbine flow meter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInstall the meter in straight pipe of the same diameter, with at least 10 diameters of straight run upstream, as specified by Barton.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConnect the pickup coil to your flow computer or readout and enter the meter's K-factor from its calibration certificate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConfirm the meter materials, pressure rating and electronic configuration against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVerify the installation and flow direction requirements before putting the meter into service.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow does a turbine flow meter work?\u003c\/strong\u003e\u003cbr\u003eLiquid turns a balanced rotor, while a pickup coil senses each blade and produces pulses in proportion to flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich liquids suit the Barton 7102?\u003c\/strong\u003e\u003cbr\u003eBarton's 7000 series is designed for low-viscosity liquids, including hydrocarbon liquids. Confirm viscosity and material compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Barton 7102?\u003c\/strong\u003e\u003cbr\u003eBarton's series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the meter need straight pipe?\u003c\/strong\u003e\u003cbr\u003eYes. Barton specifies straight pipe of the same diameter with at least 10 diameters upstream for accurate operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose the 7102 or another size?\u003c\/strong\u003e\u003cbr\u003eSize the meter to your actual flow rather than simply matching the pipe size. The 7102 is listed for 24-240 US GPM. For lower flows, consider the Barton 7146. For higher flows, consider the Barton 7125. Contact General Tech to confirm the suitable model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure reverse flow?\u003c\/strong\u003e\u003cbr\u003eThe 7000 series has a symmetrical bidirectional design, and electronic options can sense flow direction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs genuine Barton stock available with UAE shipping?\u003c\/strong\u003e\u003cbr\u003eYes. Genuine Barton stock ships free across the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for current pricing and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e","brand":"Barton","offers":[{"title":"Default Title","offer_id":42170171261041,"sku":"TFM\/7102\/2 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/barton-turbine-flow-meters-default-title-barton-7102-rf-meter-meter-size-2-inch-end-connection-size-1-inch-flow-rate-24-240-us-gpm-25381832949873.jpg?v=1761752374"},{"product_id":"barton-7125-flanged-rf-meter-meter-size-2-1-2-inch-end-connection-size-1-inch-flow-rate-44-440-us-gpm","title":"Barton 7125 Flanged RF meter, meter Size :2-1\/2 inch,End Connection Size :1 inch,Flow Rate :44-440 US GPM","description":"\u003cp\u003e\u003cstrong\u003eModel 7125 · 2-1\/2\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Barton 7125 is a 2-1\/2\" liquid turbine flow meter from Barton's Model 7100 range, listed for 44-440 US GPM. It suits low-viscosity liquids, including hydrocarbons. Genuine Barton stock at General Tech Services LLC, UAE, with free UAE-wide shipping. Request a quote in under a minute - call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e \u003cstrong\u003e7125\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eContact Number:\u003c\/strong\u003e \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMid-size liquid lines in production, process and transfer service need a meter that reads accurately across a wide flow range. The Barton 7125 is a 2-1\/2\" turbine meter listed for 44-440 US GPM.\u003c\/p\u003e\n\u003cp\u003eA turbine flow meter places a balanced rotor in the liquid stream. Flow turns the rotor at a speed proportional to the flow rate, while a pickup coil on the meter body senses each passing blade tip and produces a pulse signal. Counting the pulses gives volume, and their frequency gives flow rate. The rotor is the only moving part.\u003c\/p\u003e\n\u003cp\u003eThe Barton 7125 belongs to Barton's Model 7100 line, which covers 3\/8\" to 8\" meters. Model 7100 meters use wear-resistant tungsten carbide sleeve bearings, which require no lubrication and are suited to demanding service. Barton's 7000 series uses a symmetrical bidirectional design, allowing it to measure flow in either direction where capacities are the same both ways.\u003c\/p\u003e\n\u003cp\u003eBarton's published series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading. The 7125 is listed with a flanged connection. For accurate results, install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream. Confirm materials, pressure rating and electronics against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003cp\u003eNeed a different size or model line? Compare the Barton 7102 (2\", 24-240 US GPM) or the Barton 7103 (3\", 70-700 US GPM).\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e2-1\/2\" meter listed for 44-440 US GPM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFlanged connection as listed\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRotor is the only moving part, keeping maintenance simple\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTungsten carbide sleeve bearings for demanding service\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBidirectional design measures flow in either direction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePickup coil pulse output adapts readily to many flow computers and readouts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGenuine Barton stock with free UAE-wide shipping\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eContact Details\u003c\/h3\u003e\n\u003cp\u003eGeneral Tech Services LLC supplies genuine Barton stock in the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for pricing, stock availability and lead time.\u003c\/p\u003e\n\u003ch3\u003eWho This Product Is Best For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eProduction, process and transfer lines in oil and gas\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow-viscosity liquid measurement where accuracy matters\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMid-size liquid flow measurement applications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReplacing an existing Barton 7000 meter like-for-like\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Specify \u0026amp; Install It\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eCheck that your normal and maximum flow fall within 44-440 US GPM and that your liquid is suitable for a turbine flow meter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConfirm the flanged connection and install the meter in straight pipe of the same diameter, with at least 10 diameters of straight run upstream, as specified by Barton.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConnect the pickup coil to your flow computer or readout and enter the meter's K-factor from its calibration certificate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConfirm the meter materials, pressure rating and electronic configuration against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVerify the installation and flow direction requirements before putting the meter into service.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow does a turbine flow meter work?\u003c\/strong\u003e\u003cbr\u003eLiquid turns a balanced rotor, while a pickup coil senses each blade and produces pulses in proportion to flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich liquids suit the Barton 7125?\u003c\/strong\u003e\u003cbr\u003eBarton's 7000 series is designed for low-viscosity liquids, including hydrocarbon liquids. Confirm viscosity and material compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Barton 7125?\u003c\/strong\u003e\u003cbr\u003eBarton's series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the meter need straight pipe?\u003c\/strong\u003e\u003cbr\u003eYes. Barton specifies straight pipe of the same diameter with at least 10 diameters upstream for accurate operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connection does the Barton 7125 use?\u003c\/strong\u003e\u003cbr\u003eThe Barton 7125 is listed with a flanged connection. Confirm the required connection configuration against the Barton datasheet before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose the 7125 or another size?\u003c\/strong\u003e\u003cbr\u003eSize the meter to your actual flow rather than simply matching the pipe size. The 7125 is listed for 44-440 US GPM. For lower flows, consider the Barton 7102. For higher flows, consider the Barton 7103. Contact General Tech to confirm the suitable model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure reverse flow?\u003c\/strong\u003e\u003cbr\u003eThe 7000 series has a symmetrical bidirectional design, and electronic options can sense flow direction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs genuine Barton stock available with UAE shipping?\u003c\/strong\u003e\u003cbr\u003eYes. Genuine Barton stock ships free across the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for current pricing and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e","brand":"Barton","offers":[{"title":"Default Title","offer_id":42170171293809,"sku":"TFM\/7125\/2-1\/2 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/barton-turbine-flow-meters-default-title-barton-7125-flanged-rf-meter-meter-size-2-1-2-inch-end-connection-size-1-inch-flow-rate-44-440-us-gpm-25381833080945.jpg?v=1761752373"},{"product_id":"barton-7103-flanged-rf-meter-meter-size-3-inch-end-connection-size-1-inch-flow-rate-70-700-us-gpm","title":"Barton 7103 Flanged RF meter, meter Size :3 inch,End Connection Size :1 inch,Flow Rate :70-700 US GPM","description":"\u003cp\u003e\u003cstrong\u003eModel 7103 · 3\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Barton 7103 is a 3\" liquid turbine flow meter from Barton's Model 7100 range, listed for 70-700 US GPM. It suits low-viscosity liquids, including hydrocarbons. Genuine Barton stock at General Tech Services LLC, UAE, with free UAE-wide shipping. Request a quote in under a minute - call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e \u003cstrong\u003e7103\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eContact Number:\u003c\/strong\u003e \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMid-size liquid lines in production, process and transfer service need a meter that reads accurately across a wide flow range. The Barton 7103 is a 3\" turbine meter listed for 70-700 US GPM.\u003c\/p\u003e\n\u003cp\u003eA turbine flow meter places a balanced rotor in the liquid stream. Flow turns the rotor at a speed proportional to the flow rate, while a pickup coil on the meter body senses each passing blade tip and produces a pulse signal. Counting the pulses gives volume, and their frequency gives flow rate. The rotor is the only moving part.\u003c\/p\u003e\n\u003cp\u003eThe Barton 7103 belongs to Barton's Model 7100 line, which covers 3\/8\" to 8\" meters. Model 7100 meters use wear-resistant tungsten carbide sleeve bearings, which require no lubrication and are suited to demanding service. Barton's 7000 series uses a symmetrical bidirectional design, allowing it to measure flow in either direction where capacities are the same both ways.\u003c\/p\u003e\n\u003cp\u003eBarton's published series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading. The 7103 is listed with a flanged connection. For accurate results, install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream. Confirm materials, pressure rating and electronics against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003cp\u003eNeed a different size or model line? Compare the Barton 7125 (2-1\/2\", 44-440 US GPM), Barton 7104 (4\", 105-1250 US GPM) or Barton 7203 (3\", 58-580 US GPM).\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e3\" meter listed for 70-700 US GPM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFlanged connection as listed\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRotor is the only moving part, keeping maintenance simple\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTungsten carbide sleeve bearings for demanding service\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBidirectional design measures flow in either direction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePickup coil pulse output adapts readily to many flow computers and readouts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGenuine Barton stock with free UAE-wide shipping\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eContact Details\u003c\/h3\u003e\n\u003cp\u003eGeneral Tech Services LLC supplies genuine Barton stock in the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for pricing, stock availability and lead time.\u003c\/p\u003e\n\u003ch3\u003eWho This Product Is Best For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eProduction, process and transfer lines in oil and gas\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow-viscosity liquid measurement where accuracy matters\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHigh-volume liquid measurement applications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReplacing an existing Barton 7000 meter like-for-like\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Specify \u0026amp; Install It\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eCheck that your normal and maximum flow fall within 70-700 US GPM and that your liquid is suitable for a turbine flow meter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConfirm the flanged connection and install the meter in straight pipe of the same diameter, with at least 10 diameters of straight run upstream, as specified by Barton.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConnect the pickup coil to your flow computer or readout and enter the meter's K-factor from its calibration certificate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConfirm the meter materials, pressure rating and electronic configuration against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVerify the installation and flow direction requirements before putting the meter into service.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow does a turbine flow meter work?\u003c\/strong\u003e\u003cbr\u003eLiquid turns a balanced rotor, while a pickup coil senses each blade and produces pulses in proportion to flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich liquids suit the Barton 7103?\u003c\/strong\u003e\u003cbr\u003eBarton's 7000 series is designed for low-viscosity liquids, including hydrocarbon liquids. Confirm viscosity and material compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Barton 7103?\u003c\/strong\u003e\u003cbr\u003eBarton's series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the meter need straight pipe?\u003c\/strong\u003e\u003cbr\u003eYes. Barton specifies straight pipe of the same diameter with at least 10 diameters upstream for accurate operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connection does the Barton 7103 use?\u003c\/strong\u003e\u003cbr\u003eThe Barton 7103 is listed with a flanged connection. Confirm the required connection configuration against the Barton datasheet before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose the 7103 or another size?\u003c\/strong\u003e\u003cbr\u003eSize the meter to your actual flow rather than simply matching the pipe size. The 7103 is listed for 70-700 US GPM. For lower flows, consider the Barton 7125. For higher flows, consider the Barton 7104. Contact General Tech to confirm the suitable model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure reverse flow?\u003c\/strong\u003e\u003cbr\u003eThe 7000 series has a symmetrical bidirectional design, and electronic options can sense flow direction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs genuine Barton stock available with UAE shipping?\u003c\/strong\u003e\u003cbr\u003eYes. Genuine Barton stock ships free across the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for current pricing and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e","brand":"Barton","offers":[{"title":"Default Title","offer_id":42170171359345,"sku":"TFM\/7103\/3 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/barton-turbine-flow-meters-default-title-barton-7103-flanged-rf-meter-meter-size-3-inch-end-connection-size-1-inch-flow-rate-70-700-us-gpm-25381833375857.jpg?v=1761752374"},{"product_id":"barton-7104-flanged-rf-meter-meter-size-4-inch-end-connection-size-1-inch-flow-rate-105-1250-us-gpm","title":"Barton 7104 Flanged RF meter, meter Size :4 inch,End Connection Size :1 inch,Flow Rate :105-1250 US GPM","description":"\u003cp\u003e\u003cstrong\u003eModel 7104 · 4\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Barton 7104 is a 4\" liquid turbine flow meter from Barton's Model 7100 range, listed for 105-1250 US GPM. It suits low-viscosity liquids, including hydrocarbons. Genuine Barton stock at General Tech Services LLC, UAE, with free UAE-wide shipping. Request a quote in under a minute - call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e \u003cstrong\u003e7104\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eContact Number:\u003c\/strong\u003e \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOn large liquid lines, small measurement errors can add up to large volumes. The Barton 7104 is a 4\" turbine meter listed for 105-1250 US GPM, built for high-volume liquid measurement.\u003c\/p\u003e\n\u003cp\u003eA turbine flow meter places a balanced rotor in the liquid stream. Flow turns the rotor at a speed proportional to the flow rate, while a pickup coil on the meter body senses each passing blade tip and produces a pulse signal. Counting the pulses gives volume, and their frequency gives flow rate. The rotor is the only moving part.\u003c\/p\u003e\n\u003cp\u003eThe Barton 7104 belongs to Barton's Model 7100 line, which covers 3\/8\" to 8\" meters. Model 7100 meters use wear-resistant tungsten carbide sleeve bearings, which require no lubrication and are suited to demanding service. Barton's 7000 series uses a symmetrical bidirectional design, allowing it to measure flow in either direction where capacities are the same both ways.\u003c\/p\u003e\n\u003cp\u003eBarton's published series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading. The 7104 is listed with a flanged connection. For accurate results, install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream. Confirm materials, pressure rating and electronics against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003cp\u003eNeed a different size or model line? Compare the Barton 7103 (3\", 70-700 US GPM), Barton 7106 (6\", 250-2500 US GPM) or Barton 7304 (4\", 115-1150 US GPM).\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e4\" meter listed for 105-1250 US GPM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFlanged connection as listed\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRotor is the only moving part, keeping maintenance simple\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTungsten carbide sleeve bearings for demanding service\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBidirectional design measures flow in either direction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePickup coil pulse output adapts readily to many flow computers and readouts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGenuine Barton stock with free UAE-wide shipping\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eContact Details\u003c\/h3\u003e\n\u003cp\u003eGeneral Tech Services LLC supplies genuine Barton stock in the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for pricing, stock availability and lead time.\u003c\/p\u003e\n\u003ch3\u003eWho This Product Is Best For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eHigh-volume hydrocarbon liquid transfer and pipelines\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTerminal and storage measurement points\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eApplications where custody-transfer-grade metering is considered\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLarge process and production liquid flow measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Specify \u0026amp; Install It\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eCheck that your normal and maximum flow fall within 105-1250 US GPM and that your liquid is suitable for a turbine flow meter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConfirm the flanged connection and install the meter in straight pipe of the same diameter, with at least 10 diameters of straight run upstream, as specified by Barton.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConnect the pickup coil to your flow computer or readout and enter the meter's K-factor from its calibration certificate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConfirm the meter materials, pressure rating and electronic configuration against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVerify the installation and flow direction requirements before putting the meter into service.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow does a turbine flow meter work?\u003c\/strong\u003e\u003cbr\u003eLiquid turns a balanced rotor, while a pickup coil senses each blade and produces pulses in proportion to flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich liquids suit the Barton 7104?\u003c\/strong\u003e\u003cbr\u003eBarton's 7000 series is designed for low-viscosity liquids, including hydrocarbon liquids. Confirm viscosity and material compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Barton 7104?\u003c\/strong\u003e\u003cbr\u003eBarton's series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the meter need straight pipe?\u003c\/strong\u003e\u003cbr\u003eYes. Barton specifies straight pipe of the same diameter with at least 10 diameters upstream for accurate operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat connection does the Barton 7104 use?\u003c\/strong\u003e\u003cbr\u003eThe Barton 7104 is listed with a flanged connection. Confirm the required connection configuration against the Barton datasheet before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose the 7104 or another size?\u003c\/strong\u003e\u003cbr\u003eSize the meter to your actual flow rather than simply matching the pipe size. The 7104 is listed for 105-1250 US GPM. For lower flows, consider the Barton 7103. For higher flows, consider the Barton 7106. Contact General Tech to confirm the suitable model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure reverse flow?\u003c\/strong\u003e\u003cbr\u003eThe 7000 series has a symmetrical bidirectional design, and electronic options can sense flow direction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs genuine Barton stock available with UAE shipping?\u003c\/strong\u003e\u003cbr\u003eYes. Genuine Barton stock ships free across the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for current pricing and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e","brand":"Barton","offers":[{"title":"Default Title","offer_id":42170171392113,"sku":"TFM\/7104\/4 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/barton-turbine-flow-meters-default-title-barton-7104-flanged-rf-meter-meter-size-4-inch-end-connection-size-1-inch-flow-rate-105-1250-us-gpm-25381833441393.jpg?v=1761752115"},{"product_id":"barton-7108-rf-meter-meter-size-8-inch-end-connection-size-1-inch-flow-rate-540-5400-us-gpm","title":"Barton 7108 RF meter, meter Size :8 inch,End Connection Size :1 inch,Flow Rate :540-5400 US GPM","description":"\u003cp\u003e\u003cstrong\u003eModel 7108 · 8\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Barton 7108 is an 8\" liquid turbine flow meter from Barton's Model 7100 range, listed for 540-5400 US GPM. It suits low-viscosity liquids, including hydrocarbons. Genuine Barton stock at General Tech Services LLC, UAE, with free UAE-wide shipping. Request a quote in under a minute - call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e \u003cstrong\u003e7108\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eContact Number:\u003c\/strong\u003e \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOn large liquid lines, small measurement errors can add up to large volumes. The Barton 7108 is an 8\" turbine meter listed for 540-5400 US GPM, built for high-volume liquid measurement.\u003c\/p\u003e\n\u003cp\u003eA turbine flow meter places a balanced rotor in the liquid stream. Flow turns the rotor at a speed proportional to the flow rate, while a pickup coil on the meter body senses each passing blade tip and produces a pulse signal. Counting the pulses gives volume, and their frequency gives flow rate. The rotor is the only moving part.\u003c\/p\u003e\n\u003cp\u003eThe Barton 7108 belongs to Barton's Model 7100 line, which covers 3\/8\" to 8\" meters. Model 7100 meters use wear-resistant tungsten carbide sleeve bearings, which require no lubrication and are suited to demanding service. Barton's 7000 series uses a symmetrical bidirectional design, allowing it to measure flow in either direction where capacities are the same both ways.\u003c\/p\u003e\n\u003cp\u003eBarton's published series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading. For accurate results, install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream. Confirm materials, pressure rating and electronics against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003cp\u003eNeed a different size or model line? Compare the Barton 7106 (6\", 250-2500 US GPM) or the Barton 7308 (8\", 540-5400 US GPM).\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e8\" meter listed for 540-5400 US GPM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRotor is the only moving part, keeping maintenance simple\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTungsten carbide sleeve bearings for demanding service\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBidirectional design measures flow in either direction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePickup coil pulse output adapts readily to many flow computers and readouts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGenuine Barton stock with free UAE-wide shipping\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eContact Details\u003c\/h3\u003e\n\u003cp\u003eGeneral Tech Services LLC supplies genuine Barton stock in the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for pricing, stock availability and lead time.\u003c\/p\u003e\n\u003ch3\u003eWho This Product Is Best For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eHigh-volume hydrocarbon liquid transfer and pipelines\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTerminal and storage measurement points\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eApplications where custody-transfer-grade metering is considered\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLarge process and production liquid flow measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Specify \u0026amp; Install It\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eCheck that your normal and maximum flow fall within 540-5400 US GPM and that your liquid is suitable for a turbine flow meter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInstall the meter in straight pipe of the same diameter, with at least 10 diameters of straight run upstream, as specified by Barton.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConnect the pickup coil to your flow computer or readout and enter the meter's K-factor from its calibration certificate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConfirm the meter materials, pressure rating and electronic configuration against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVerify the installation and flow direction requirements before putting the meter into service.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow does a turbine flow meter work?\u003c\/strong\u003e\u003cbr\u003eLiquid turns a balanced rotor, while a pickup coil senses each blade and produces pulses in proportion to flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich liquids suit the Barton 7108?\u003c\/strong\u003e\u003cbr\u003eBarton's 7000 series is designed for low-viscosity liquids, including hydrocarbon liquids. Confirm viscosity and material compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Barton 7108?\u003c\/strong\u003e\u003cbr\u003eBarton's series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the meter need straight pipe?\u003c\/strong\u003e\u003cbr\u003eYes. Barton specifies straight pipe of the same diameter with at least 10 diameters upstream for accurate operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose the 7108 or another size?\u003c\/strong\u003e\u003cbr\u003eSize the meter to your actual flow rather than simply matching the pipe size. The 7108 is listed for 540-5400 US GPM. For lower flows, consider the Barton 7106. Contact General Tech to confirm the suitable model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure reverse flow?\u003c\/strong\u003e\u003cbr\u003eThe 7000 series has a symmetrical bidirectional design, and electronic options can sense flow direction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs genuine Barton stock available with UAE shipping?\u003c\/strong\u003e\u003cbr\u003eYes. Genuine Barton stock ships free across the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for current pricing and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e","brand":"Barton","offers":[{"title":"Default Title","offer_id":42170171490417,"sku":"TFM\/7108\/8 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/barton-turbine-flow-meters-default-title-barton-7108-rf-meter-meter-size-8-inch-end-connection-size-1-inch-flow-rate-540-5400-us-gpm-25381833572465.jpg?v=1761752021"},{"product_id":"barton-7283-rf-meter-meter-size-3-8-inch-end-connection-size-2-inch-flow-rate-0-5-5-us-gpm","title":"Barton 7283 RF meter, meter Size :3\/8 inch,End Connection Size :2 inch,Flow Rate :0.5-5 US GPM","description":"\u003cp\u003e\u003cstrong\u003eModel 7283 · 3\/8\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Barton 7283 is a 3\/8\" liquid turbine flow meter from Barton's Model 7200 range, listed for 0.5-5 US GPM. It suits low-viscosity liquids, including hydrocarbons. Genuine Barton stock at General Tech Services LLC, UAE, with free UAE-wide shipping. Request a quote in under a minute - call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e \u003cstrong\u003e7283\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eContact Number:\u003c\/strong\u003e \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall liquid lines, such as chemical injection, additive dosing and sample streams, can carry flows too low for most meters to read well. The Barton 7283 is a 3\/8\" turbine meter listed for 0.5-5 US GPM, making it suitable for this type of low-flow duty.\u003c\/p\u003e\n\u003cp\u003eA turbine flow meter places a balanced rotor in the liquid stream. Flow turns the rotor at a speed proportional to the flow rate, while a pickup coil on the meter body senses each passing blade tip and produces a pulse signal. Counting the pulses gives volume, and their frequency gives flow rate. The rotor is the only moving part.\u003c\/p\u003e\n\u003cp\u003eThe Barton 7283 belongs to Barton's Model 7200 line, which covers 3\/8\" to 3\" meters. Model 7200 meters use self-lubricating precision stainless steel ball bearings with dry-lubricant-impregnated ball separators, suited to low-flow, small-line duty. Barton's 7000 series uses a symmetrical bidirectional design, allowing it to measure flow in either direction where capacities are the same both ways.\u003c\/p\u003e\n\u003cp\u003eBarton's published series data gives linearity of ±1% of reading over the flow range for meters smaller than 1 inch and repeatability of ±0.02% of reading. For accurate results, install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream. Confirm materials, pressure rating and electronics against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003cp\u003eNeed a different size or model line? Compare the Barton 7284 (1\/2\", 1-10 US GPM) or the Barton 7183 (3\/8\", 0.45-4 US GPM).\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e3\/8\" meter listed for 0.5-5 US GPM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRotor is the only moving part, keeping maintenance simple\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSelf-lubricating stainless steel ball bearings for low-flow service\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBidirectional design measures flow in either direction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePickup coil pulse output adapts readily to many flow computers and readouts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGenuine Barton stock with free UAE-wide shipping\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eContact Details\u003c\/h3\u003e\n\u003cp\u003eGeneral Tech Services LLC supplies genuine Barton stock in the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for pricing, stock availability and lead time.\u003c\/p\u003e\n\u003ch3\u003eWho This Product Is Best For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eChemical injection and additive dosing lines\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow-flow hydrocarbon and process liquid measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSmall-bore production and process lines\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSample streams requiring liquid flow measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReplacing an existing small-bore Barton 7000 meter\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Specify \u0026amp; Install It\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eCheck that your normal and maximum flow fall within 0.5-5 US GPM and that your liquid is suitable for a turbine flow meter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInstall the meter in straight pipe of the same diameter, with at least 10 diameters of straight run upstream, as specified by Barton.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConnect the pickup coil output to a compatible flow computer or readout and configure the system as required.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConfirm the meter materials, pressure rating and electronic configuration against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVerify the installation and flow direction requirements before putting the meter into service.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow does a turbine flow meter work?\u003c\/strong\u003e\u003cbr\u003eLiquid turns a balanced rotor, while a pickup coil senses each blade and produces pulses in proportion to flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich liquids suit the Barton 7283?\u003c\/strong\u003e\u003cbr\u003eBarton's 7000 series is designed for low-viscosity liquids, including hydrocarbon liquids. Confirm viscosity and material compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Barton 7283?\u003c\/strong\u003e\u003cbr\u003eBarton's series data gives linearity of ±1% of reading over the flow range for meters smaller than 1 inch and repeatability of ±0.02% of reading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the meter need straight pipe?\u003c\/strong\u003e\u003cbr\u003eYes. Barton specifies straight pipe of the same diameter with at least 10 diameters upstream for accurate operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose the 7283 or another size?\u003c\/strong\u003e\u003cbr\u003eSize the meter to your actual flow rather than simply matching the pipe size. The 7283 is listed for 0.5-5 US GPM. For higher flows, consider the Barton 7284. Contact General Tech to confirm the suitable model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure reverse flow?\u003c\/strong\u003e\u003cbr\u003eThe 7000 series has a symmetrical bidirectional design, and electronic options can sense flow direction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs genuine Barton stock available with UAE shipping?\u003c\/strong\u003e\u003cbr\u003eYes. Genuine Barton stock ships free across the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for current pricing and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e","brand":"Barton","offers":[{"title":"Default Title","offer_id":42170171523185,"sku":"TFM\/7283\/3\/8 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/barton-turbine-flow-meters-default-title-barton-7283-rf-meter-meter-size-3-8-inch-end-connection-size-2-inch-flow-rate-0-5-5-us-gpm-25381833834609.jpg?v=1761752114"},{"product_id":"barton-7284-rf-meter-meter-size-1-2-inch-end-connection-size-2-inch-flow-rate-1-10-us-gpm","title":"Barton 7284 RF meter, meter Size :1\/2 inch,End Connection Size :2 inch,Flow Rate :1-10 US GPM","description":"\u003cp\u003e\u003cstrong\u003eModel 7284 · 1\/2\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Barton 7284 is a 1\/2\" liquid turbine flow meter from Barton's Model 7200 range, listed for 1-10 US GPM. It suits low-viscosity liquids, including hydrocarbons. Genuine Barton stock at General Tech Services LLC, UAE, with free UAE-wide shipping. Request a quote in under a minute - call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e \u003cstrong\u003e7284\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eContact Number:\u003c\/strong\u003e \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall liquid lines, such as chemical injection, additive dosing and sample streams, can carry flows too low for most meters to read well. The Barton 7284 is a 1\/2\" turbine meter listed for 1-10 US GPM, making it suitable for this type of low-flow duty.\u003c\/p\u003e\n\u003cp\u003eA turbine flow meter places a balanced rotor in the liquid stream. Flow turns the rotor at a speed proportional to the flow rate, while a pickup coil on the meter body senses each passing blade tip and produces a pulse signal. Counting the pulses gives volume, and their frequency gives flow rate. The rotor is the only moving part.\u003c\/p\u003e\n\u003cp\u003eThe Barton 7284 belongs to Barton's Model 7200 line, which covers 3\/8\" to 3\" meters. Model 7200 meters use self-lubricating precision stainless steel ball bearings with dry-lubricant-impregnated ball separators, suited to low-flow, small-line duty. Barton's 7000 series uses a symmetrical bidirectional design, allowing it to measure flow in either direction where capacities are the same both ways.\u003c\/p\u003e\n\u003cp\u003eBarton's published series data gives linearity of ±1% of reading over the flow range for meters smaller than 1 inch and repeatability of ±0.02% of reading. For accurate results, install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream. Confirm materials, pressure rating and electronics against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003cp\u003eNeed a different size or model line? Compare the Barton 7283 (3\/8\", 0.5-5 US GPM), Barton 7285 (5\/8\", 1.6-16 US GPM) or Barton 7184 (1\/2\", 0.88-8.2 US GPM).\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e1\/2\" meter listed for 1-10 US GPM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRotor is the only moving part, keeping maintenance simple\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSelf-lubricating stainless steel ball bearings for low-flow service\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBidirectional design measures flow in either direction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePickup coil pulse output adapts readily to many flow computers and readouts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGenuine Barton stock with free UAE-wide shipping\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eContact Details\u003c\/h3\u003e\n\u003cp\u003eGeneral Tech Services LLC supplies genuine Barton stock in the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for pricing, stock availability and lead time.\u003c\/p\u003e\n\u003ch3\u003eWho This Product Is Best For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eChemical injection and additive dosing lines\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow-flow hydrocarbon and process liquid measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSmall-bore production and process lines\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSample streams requiring liquid flow measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReplacing an existing small-bore Barton 7000 meter\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Specify \u0026amp; Install It\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eCheck that your normal and maximum flow fall within 1-10 US GPM and that your liquid is suitable for a turbine flow meter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInstall the meter in straight pipe of the same diameter, with at least 10 diameters of straight run upstream, as specified by Barton.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConnect the pickup coil output to a compatible flow computer or readout and configure the system as required.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConfirm the meter materials, pressure rating and electronic configuration against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVerify the installation and flow direction requirements before putting the meter into service.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow does a turbine flow meter work?\u003c\/strong\u003e\u003cbr\u003eLiquid turns a balanced rotor, while a pickup coil senses each blade and produces pulses in proportion to flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich liquids suit the Barton 7284?\u003c\/strong\u003e\u003cbr\u003eBarton's 7000 series is designed for low-viscosity liquids, including hydrocarbon liquids. Confirm viscosity and material compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Barton 7284?\u003c\/strong\u003e\u003cbr\u003eBarton's series data gives linearity of ±1% of reading over the flow range for meters smaller than 1 inch and repeatability of ±0.02% of reading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the meter need straight pipe?\u003c\/strong\u003e\u003cbr\u003eYes. Barton specifies straight pipe of the same diameter with at least 10 diameters upstream for accurate operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose the 7284 or another size?\u003c\/strong\u003e\u003cbr\u003eSize the meter to your actual flow rather than simply matching the pipe size. The 7284 is listed for 1-10 US GPM. For lower flows, consider the Barton 7283; for higher flows, consider the Barton 7285. Contact General Tech to confirm the suitable model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure reverse flow?\u003c\/strong\u003e\u003cbr\u003eThe 7000 series has a symmetrical bidirectional design, and electronic options can sense flow direction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs genuine Barton stock available with UAE shipping?\u003c\/strong\u003e\u003cbr\u003eYes. Genuine Barton stock ships free across the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for current pricing and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e","brand":"Barton","offers":[{"title":"Default Title","offer_id":42170171555953,"sku":"TFM\/7284\/1\/2 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/barton-turbine-flow-meters-default-title-barton-7284-rf-meter-meter-size-1-2-inch-end-connection-size-2-inch-flow-rate-1-10-us-gpm-25381833900145.jpg?v=1761752020"},{"product_id":"barton-7285-rf-meter-meter-size-5-8-inch-end-connection-size-2-inch-flow-rate-1-6-16-us-gpm","title":"Barton 7285 RF meter, meter Size :5\/8 inch,End Connection Size :2 inch,Flow Rate :1.6-16 US GPM","description":"\u003cp\u003e\u003cstrong\u003eModel 7285 · 5\/8\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Barton 7285 is a 5\/8\" liquid turbine flow meter from Barton's Model 7200 range, listed for 1.6-16 US GPM. It suits low-viscosity liquids including hydrocarbons. Genuine Barton stock at General Tech Services LLC, UAE, with free UAE-wide shipping. Request a quote in under a minute - call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e \u003cstrong\u003e7285\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eContact Number:\u003c\/strong\u003e \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall liquid lines, such as chemical injection, additive dosing and sample streams, can carry flows too low for many meters to read effectively. The Barton 7285 is a 5\/8\" turbine meter listed for 1.6-16 US GPM, making it suited to this type of low-flow duty.\u003c\/p\u003e\n\u003cp\u003eA turbine flow meter places a balanced rotor in the liquid stream. Flow turns the rotor at a speed proportional to flow rate, while a pickup coil on the meter body senses each passing blade tip and produces a pulse signal. Counting the pulses gives volume, and their frequency gives flow rate. The rotor is the only moving part.\u003c\/p\u003e\n\u003cp\u003eThe Barton 7285 belongs to Barton's Model 7200 line, which covers 3\/8 to 3 inch meters. Model 7200 meters use self-lubricating precision stainless steel ball bearings with dry-lubricant-impregnated ball separators, suited to low-flow, small-line duty. Barton's 7000 series uses a symmetrical bidirectional design, allowing flow measurement in either direction where capacities are the same both ways.\u003c\/p\u003e\n\u003cp\u003eBarton's published series data gives linearity of ±1% of reading over the flow range for meters smaller than 1 inch and repeatability of ±0.02% of reading. For accurate results, install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream. Confirm materials, pressure rating and electronics against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003cp\u003eNeed a different size or model line? Compare the Barton 7284 (1\/2\", 1-10 US GPM), Barton 7286 (3\/4\", 2.3-23 US GPM), or Barton 7185 (5\/8\", 1.6-16 US GPM).\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e5\/8\" meter listed for 1.6-16 US GPM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRotor is the only moving part, keeping maintenance simple\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSelf-lubricating stainless steel ball bearings for long service life\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBidirectional design measures flow in either direction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePulse output adapts readily to many flow computers and readouts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSuitable for chemical injection, additive dosing and other low-flow liquid applications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGenuine Barton stock with free UAE-wide shipping\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eContact Details\u003c\/h3\u003e\n\u003cp\u003eGeneral Tech Services LLC supplies genuine Barton stock in the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for pricing, stock availability and lead time.\u003c\/p\u003e\n\u003ch3\u003eWho This Product Is Best For\u003c\/h3\u003e\n\u003cp\u003eThe Barton 7285 is well suited for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eChemical injection and additive dosing lines\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow-flow hydrocarbon and process liquid measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSmall-bore production and process lines\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSample streams and other low-flow applications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReplacing an existing small-bore Barton 7000 series meter\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Specify \u0026amp; Install It\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConfirm the flow range:\u003c\/strong\u003e Check that your normal and maximum flow fall within the listed 1.6-16 US GPM range and that the liquid is suitable for a turbine meter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eProvide the required straight run:\u003c\/strong\u003e Install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream, as specified by Barton.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConnect the output:\u003c\/strong\u003e Connect the pickup coil to your flow computer or readout and enter the meter's K-factor from its calibration certificate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eVerify application details:\u003c\/strong\u003e Confirm the meter materials, pressure rating and electronics against the Barton datasheet and your process requirements before ordering.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow does a turbine flow meter work?\u003c\/strong\u003e\u003cbr\u003eLiquid turns a balanced rotor, while a pickup coil senses each blade and produces pulses in proportion to flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich liquids suit the Barton 7285?\u003c\/strong\u003e\u003cbr\u003eBarton's 7000 series is designed for low-viscosity liquids, including hydrocarbon liquids. Confirm viscosity and material compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Barton 7285?\u003c\/strong\u003e\u003cbr\u003eBarton's published series data gives linearity of ±1% of reading over the flow range for meters smaller than 1 inch and repeatability of ±0.02% of reading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the meter need straight pipe?\u003c\/strong\u003e\u003cbr\u003eYes. Barton specifies straight pipe of the same diameter with at least 10 diameters of straight run upstream for accurate operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose the 7285 or another size?\u003c\/strong\u003e\u003cbr\u003eSize the meter according to your required flow range, not simply the pipe size. The 7285 is listed for 1.6-16 US GPM. For lower flows, consider the Barton 7284. For higher flows, consider the Barton 7286. Contact General Tech to confirm the suitable model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure reverse flow?\u003c\/strong\u003e\u003cbr\u003eThe 7000 series has a symmetrical bidirectional design, and electronic options can sense flow direction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs genuine Barton stock available with UAE shipping?\u003c\/strong\u003e\u003cbr\u003eYes. Genuine Barton stock ships free across the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for current pricing and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e","brand":"Barton","offers":[{"title":"Default Title","offer_id":42170171588721,"sku":"TFM\/7285\/5\/8 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/barton-turbine-flow-meters-default-title-barton-7285-rf-meter-meter-size-5-8-inch-end-connection-size-2-inch-flow-rate-1-6-16-us-gpm-25381833998449.jpg?v=1761752019"},{"product_id":"barton-7286-rf-meter-meter-size-3-4-inch-end-connection-size-2-inch-flow-rate-2-3-23-us-gpm","title":"Barton 7286 RF meter, meter Size :3\/4 inch,End Connection Size :2 inch,Flow Rate :2.3-23 US GPM","description":"\u003cp\u003e\u003cstrong\u003eModel 7286 · 3\/4\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Barton 7286 is a 3\/4\" liquid turbine flow meter from Barton's Model 7200 range, listed for 2.3-23 US GPM. It suits low-viscosity liquids including hydrocarbons. Genuine Barton stock at General Tech Services LLC, UAE, with free UAE-wide shipping. Request a quote in under a minute - call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e \u003cstrong\u003e7286\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eContact Number:\u003c\/strong\u003e \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall liquid lines, such as chemical injection, additive dosing and sample streams, can carry flows too low for many meters to read effectively. The Barton 7286 is a 3\/4\" turbine meter listed for 2.3-23 US GPM, making it suited to this type of low-flow duty.\u003c\/p\u003e\n\u003cp\u003eA turbine flow meter places a balanced rotor in the liquid stream. Flow turns the rotor at a speed proportional to flow rate, while a pickup coil on the meter body senses each passing blade tip and produces a pulse signal. Counting the pulses gives volume, and their frequency gives flow rate. The rotor is the only moving part.\u003c\/p\u003e\n\u003cp\u003eThe Barton 7286 belongs to Barton's Model 7200 line, which covers 3\/8 to 3 inch meters. Model 7200 meters use self-lubricating precision stainless steel ball bearings with dry-lubricant-impregnated ball separators, suited to low-flow, small-line duty. Barton's 7000 series uses a symmetrical bidirectional design, allowing flow measurement in either direction where capacities are the same both ways.\u003c\/p\u003e\n\u003cp\u003eBarton's published series data gives linearity of ±1% of reading over the flow range for meters smaller than 1 inch and repeatability of ±0.02% of reading. For accurate results, install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream. Confirm materials, pressure rating and electronics against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003cp\u003eNeed a different size or model line? Compare the Barton 7285 (5\/8\", 1.6-16 US GPM), Barton 7201 (1\", 5-50 US GPM), or Barton 7186 (3\/4\", 2.3-23 US GPM).\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e3\/4\" meter listed for 2.3-23 US GPM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRotor is the only moving part, keeping maintenance simple\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSelf-lubricating stainless steel ball bearings for long service life\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBidirectional design measures flow in either direction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePulse output adapts readily to many flow computers and readouts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSuitable for chemical injection, additive dosing and other low-flow liquid applications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGenuine Barton stock with free UAE-wide shipping\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eContact Details\u003c\/h3\u003e\n\u003cp\u003eGeneral Tech Services LLC supplies genuine Barton stock in the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for pricing, stock availability and lead time.\u003c\/p\u003e\n\u003ch3\u003eWho This Product Is Best For\u003c\/h3\u003e\n\u003cp\u003eThe Barton 7286 is well suited for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eChemical injection and additive dosing lines\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow-flow hydrocarbon and process liquid measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSmall-bore production and process lines\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSample streams and other low-flow applications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReplacing an existing small-bore Barton 7000 series meter\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Specify \u0026amp; Install It\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConfirm the flow range:\u003c\/strong\u003e Check that your normal and maximum flow fall within the listed 2.3-23 US GPM range and that the liquid is suitable for a turbine meter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eProvide the required straight run:\u003c\/strong\u003e Install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream, as specified by Barton.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConnect the output:\u003c\/strong\u003e Connect the pickup coil to your flow computer or readout and enter the meter's K-factor from its calibration certificate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eVerify application details:\u003c\/strong\u003e Confirm the meter materials, pressure rating and electronics against the Barton datasheet and your process requirements before ordering.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow does a turbine flow meter work?\u003c\/strong\u003e\u003cbr\u003eLiquid turns a balanced rotor, while a pickup coil senses each blade and produces pulses in proportion to flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich liquids suit the Barton 7286?\u003c\/strong\u003e\u003cbr\u003eBarton's 7000 series is designed for low-viscosity liquids, including hydrocarbon liquids. Confirm viscosity and material compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Barton 7286?\u003c\/strong\u003e\u003cbr\u003eBarton's published series data gives linearity of ±1% of reading over the flow range for meters smaller than 1 inch and repeatability of ±0.02% of reading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the meter need straight pipe?\u003c\/strong\u003e\u003cbr\u003eYes. Barton specifies straight pipe of the same diameter with at least 10 diameters of straight run upstream for accurate operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose the 7286 or another size?\u003c\/strong\u003e\u003cbr\u003eSize the meter according to your required flow range, not simply the pipe size. The 7286 is listed for 2.3-23 US GPM. For lower flows, consider the Barton 7285. For higher flows, consider the Barton 7201. Contact General Tech to confirm the suitable model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure reverse flow?\u003c\/strong\u003e\u003cbr\u003eThe 7000 series has a symmetrical bidirectional design, and electronic options can sense flow direction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs genuine Barton stock available with UAE shipping?\u003c\/strong\u003e\u003cbr\u003eYes. Genuine Barton stock ships free across the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for current pricing and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e","brand":"Barton","offers":[{"title":"Default Title","offer_id":42170171654257,"sku":"TFM\/7286\/3\/4 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/barton-turbine-flow-meters-default-title-barton-7286-rf-meter-meter-size-3-4-inch-end-connection-size-2-inch-flow-rate-2-3-23-us-gpm-25381834391665.jpg?v=1761752018"},{"product_id":"barton-7201-rf-meter-meter-size-1-inch-end-connection-size-2-inch-flow-rate-5-50-us-gpm","title":"Barton 7201 RF meter, meter Size :1 inch,End Connection Size :2 inch,Flow Rate :5-50 US GPM","description":"\u003cp\u003e\u003cstrong\u003eModel 7201 · 1\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Barton 7201 is a 1\" liquid turbine flow meter from Barton's Model 7200 range, listed for 5-50 US GPM. It suits low-viscosity liquids including hydrocarbons. Genuine Barton stock at General Tech Services LLC, UAE, with free UAE-wide shipping. Request a quote in under a minute - call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e \u003cstrong\u003e7201\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eContact Number:\u003c\/strong\u003e \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduction, process and transfer lines need reliable flow measurement across the required operating range. The Barton 7201 is a 1\" turbine meter listed for 5-50 US GPM.\u003c\/p\u003e\n\u003cp\u003eA turbine flow meter places a balanced rotor in the liquid stream. Flow turns the rotor at a speed proportional to flow rate, while a pickup coil on the meter body senses each passing blade tip and produces a pulse signal. Counting the pulses gives volume, and their frequency gives flow rate. The rotor is the only moving part.\u003c\/p\u003e\n\u003cp\u003eThe Barton 7201 belongs to Barton's Model 7200 line, which covers 3\/8 to 3 inch meters. Model 7200 meters use self-lubricating precision stainless steel ball bearings with dry-lubricant-impregnated ball separators, suited to low-flow, small-line duty. Barton's 7000 series uses a symmetrical bidirectional design, allowing flow measurement in either direction where capacities are the same both ways.\u003c\/p\u003e\n\u003cp\u003eBarton's published series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading. For accurate results, install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream. Confirm materials, pressure rating and electronics against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003cp\u003eNeed a different size or model line? Compare the Barton 7286 (3\/4\", 2.3-23 US GPM), Barton 7245 (1-1\/4\", 6-90 US GPM), or Barton 7101 (1\", 5-50 US GPM).\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e1\" meter listed for 5-50 US GPM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRotor is the only moving part, keeping maintenance simple\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSelf-lubricating stainless steel ball bearings for long service life\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBidirectional design measures flow in either direction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePulse output adapts readily to many flow computers and readouts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSuitable for low-viscosity liquid measurement, including hydrocarbon applications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGenuine Barton stock with free UAE-wide shipping\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eContact Details\u003c\/h3\u003e\n\u003cp\u003eGeneral Tech Services LLC supplies genuine Barton stock in the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for pricing, stock availability and lead time.\u003c\/p\u003e\n\u003ch3\u003eWho This Product Is Best For\u003c\/h3\u003e\n\u003cp\u003eThe Barton 7201 is well suited for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eProduction, process and transfer lines in oil and gas\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow-viscosity liquid measurement where accuracy matters\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSmall-line and low-flow applications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReplacing an existing Barton 7000 series meter like-for-like\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eApplications requiring bidirectional flow measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Specify \u0026amp; Install It\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConfirm the flow range:\u003c\/strong\u003e Check that your normal and maximum flow fall within the listed 5-50 US GPM range and that the liquid is suitable for a turbine meter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eProvide the required straight run:\u003c\/strong\u003e Install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream, as specified by Barton.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConnect the output:\u003c\/strong\u003e Connect the pickup coil to your flow computer or readout and enter the meter's K-factor from its calibration certificate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eVerify application details:\u003c\/strong\u003e Confirm the meter materials, pressure rating and electronics against the Barton datasheet and your process requirements before ordering.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow does a turbine flow meter work?\u003c\/strong\u003e\u003cbr\u003eLiquid turns a balanced rotor, while a pickup coil senses each blade and produces pulses in proportion to flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich liquids suit the Barton 7201?\u003c\/strong\u003e\u003cbr\u003eBarton's 7000 series is designed for low-viscosity liquids, including hydrocarbon liquids. Confirm viscosity and material compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Barton 7201?\u003c\/strong\u003e\u003cbr\u003eBarton's published series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the meter need straight pipe?\u003c\/strong\u003e\u003cbr\u003eYes. Barton specifies straight pipe of the same diameter with at least 10 diameters of straight run upstream for accurate operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose the 7201 or another size?\u003c\/strong\u003e\u003cbr\u003eSize the meter according to your required flow range, not simply the pipe size. The 7201 is listed for 5-50 US GPM. For lower flows, consider the Barton 7286. For higher flows, consider the Barton 7245. Contact General Tech to confirm the suitable model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure reverse flow?\u003c\/strong\u003e\u003cbr\u003eThe 7000 series has a symmetrical bidirectional design, and electronic options can sense flow direction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs genuine Barton stock available with UAE shipping?\u003c\/strong\u003e\u003cbr\u003eYes. Genuine Barton stock ships free across the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for current pricing and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e","brand":"Barton","offers":[{"title":"Default Title","offer_id":42170171687025,"sku":"TFM\/7201\/1 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/barton-turbine-flow-meters-default-title-barton-7201-rf-meter-meter-size-1-inch-end-connection-size-2-inch-flow-rate-5-50-us-gpm-25381834719345.jpg?v=1761752019"},{"product_id":"barton-7245-rf-meter-meter-size-1-1-4-inch-end-connection-size-2-inch-flow-rate-6-90-us-gpm","title":"Barton 7245 RF meter, meter Size :1-1\/4 inch ,End Connection Size :2 inch,Flow Rate :6-90 US GPM","description":"\u003cp\u003e\u003cstrong\u003eModel 7245 · 1-1\/4\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Barton 7245 is a 1-1\/4\" liquid turbine flow meter from Barton's Model 7200 range, listed for 6-90 US GPM. It suits low-viscosity liquids including hydrocarbons. Genuine Barton stock at General Tech Services LLC, UAE, with free UAE-wide shipping. Request a quote in under a minute - call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e \u003cstrong\u003e7245\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eContact Number:\u003c\/strong\u003e \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduction, process and transfer lines need reliable flow measurement across the required operating range. The Barton 7245 is a 1-1\/4\" turbine meter listed for 6-90 US GPM.\u003c\/p\u003e\n\u003cp\u003eA turbine flow meter places a balanced rotor in the liquid stream. Flow turns the rotor at a speed proportional to flow rate, while a pickup coil on the meter body senses each passing blade tip and produces a pulse signal. Counting the pulses gives volume, and their frequency gives flow rate. The rotor is the only moving part.\u003c\/p\u003e\n\u003cp\u003eThe Barton 7245 belongs to Barton's Model 7200 line, which covers 3\/8 to 3 inch meters. Model 7200 meters use self-lubricating precision stainless steel ball bearings with dry-lubricant-impregnated ball separators, suited to low-flow, small-line duty. Barton's 7000 series uses a symmetrical bidirectional design, allowing flow measurement in either direction where capacities are the same both ways.\u003c\/p\u003e\n\u003cp\u003eBarton's published series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading. For accurate results, install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream. Confirm materials, pressure rating and electronics against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003cp\u003eNeed a different size or model line? Compare the Barton 7201 (1\", 5-50 US GPM), Barton 7246 (1-1\/2\", 13-130 US GPM), or Barton 7145 (1-1\/4\", 10-80 US GPM).\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e1-1\/4\" meter listed for 6-90 US GPM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRotor is the only moving part, keeping maintenance simple\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSelf-lubricating stainless steel ball bearings for long service life\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBidirectional design measures flow in either direction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePulse output adapts readily to many flow computers and readouts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSuitable for low-viscosity liquid measurement, including hydrocarbon applications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGenuine Barton stock with free UAE-wide shipping\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eContact Details\u003c\/h3\u003e\n\u003cp\u003eGeneral Tech Services LLC supplies genuine Barton stock in the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for pricing, stock availability and lead time.\u003c\/p\u003e\n\u003ch3\u003eWho This Product Is Best For\u003c\/h3\u003e\n\u003cp\u003eThe Barton 7245 is well suited for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eProduction, process and transfer lines in oil and gas\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow-viscosity liquid measurement where accuracy matters\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSmall-line and low-flow applications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReplacing an existing Barton 7000 series meter like-for-like\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eApplications requiring bidirectional flow measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Specify \u0026amp; Install It\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConfirm the flow range:\u003c\/strong\u003e Check that your normal and maximum flow fall within the listed 6-90 US GPM range and that the liquid is suitable for a turbine meter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eProvide the required straight run:\u003c\/strong\u003e Install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream, as specified by Barton.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConnect the output:\u003c\/strong\u003e Connect the pickup coil to your flow computer or readout and enter the meter's K-factor from its calibration certificate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eVerify application details:\u003c\/strong\u003e Confirm the meter materials, pressure rating and electronics against the Barton datasheet and your process requirements before ordering.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow does a turbine flow meter work?\u003c\/strong\u003e\u003cbr\u003eLiquid turns a balanced rotor, while a pickup coil senses each blade and produces pulses in proportion to flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich liquids suit the Barton 7245?\u003c\/strong\u003e\u003cbr\u003eBarton's 7000 series is designed for low-viscosity liquids, including hydrocarbon liquids. Confirm viscosity and material compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Barton 7245?\u003c\/strong\u003e\u003cbr\u003eBarton's published series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the meter need straight pipe?\u003c\/strong\u003e\u003cbr\u003eYes. Barton specifies straight pipe of the same diameter with at least 10 diameters of straight run upstream for accurate operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose the 7245 or another size?\u003c\/strong\u003e\u003cbr\u003eSize the meter according to your required flow range, not simply the pipe size. The 7245 is listed for 6-90 US GPM. For lower flows, consider the Barton 7201. For higher flows, consider the Barton 7246. Contact General Tech to confirm the suitable model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure reverse flow?\u003c\/strong\u003e\u003cbr\u003eThe 7000 series has a symmetrical bidirectional design, and electronic options can sense flow direction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs genuine Barton stock available with UAE shipping?\u003c\/strong\u003e\u003cbr\u003eYes. Genuine Barton stock ships free across the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for current pricing and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e","brand":"Barton","offers":[{"title":"Default Title","offer_id":42170171785329,"sku":"TFM\/7245\/1-1\/4 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/barton-turbine-flow-meters-default-title-barton-7245-rf-meter-meter-size-1-1-4-inch-end-connection-size-2-inch-flow-rate-6-90-us-gpm-25381834784881.jpg?v=1761752018"},{"product_id":"barton-7246-rf-meter-meter-size-1-1-2-inch-end-connection-size-2-inch-flow-rate-13-130-us-gpm","title":"Barton 7246 RF meter, meter Size :1-1\/2 inch,End Connection Size :2 inch,Flow Rate :13-130 US GPM","description":"\u003cp\u003e\u003cstrong\u003eModel 7246 · 1-1\/2\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Barton 7246 is a 1-1\/2\" liquid turbine flow meter from Barton's Model 7200 range, listed for 13-130 US GPM. It suits low-viscosity liquids including hydrocarbons. Genuine Barton stock at General Tech Services LLC, UAE, with free UAE-wide shipping. Request a quote in under a minute - call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e \u003cstrong\u003e7246\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eContact Number:\u003c\/strong\u003e \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduction, process and transfer lines need reliable flow measurement across the required operating range. The Barton 7246 is a 1-1\/2\" turbine meter listed for 13-130 US GPM.\u003c\/p\u003e\n\u003cp\u003eA turbine flow meter places a balanced rotor in the liquid stream. Flow turns the rotor at a speed proportional to flow rate, while a pickup coil on the meter body senses each passing blade tip and produces a pulse signal. Counting the pulses gives volume, and their frequency gives flow rate. The rotor is the only moving part.\u003c\/p\u003e\n\u003cp\u003eThe Barton 7246 belongs to Barton's Model 7200 line, which covers 3\/8 to 3 inch meters. Model 7200 meters use self-lubricating precision stainless steel ball bearings with dry-lubricant-impregnated ball separators, suited to low-flow, small-line duty. Barton's 7000 series uses a symmetrical bidirectional design, allowing flow measurement in either direction where capacities are the same both ways.\u003c\/p\u003e\n\u003cp\u003eBarton's published series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading. For accurate results, install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream. Confirm materials, pressure rating and electronics against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003cp\u003eNeed a different size or model line? Compare the Barton 7245 (1-1\/4\", 6-90 US GPM), Barton 7202 (2\", 24-240 US GPM), or Barton 7146 (1-1\/2\", 13-130 US GPM).\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e1-1\/2\" meter listed for 13-130 US GPM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRotor is the only moving part, keeping maintenance simple\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSelf-lubricating stainless steel ball bearings for long service life\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBidirectional design measures flow in either direction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePulse output adapts readily to many flow computers and readouts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSuitable for low-viscosity liquid measurement, including hydrocarbon applications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGenuine Barton stock with free UAE-wide shipping\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eContact Details\u003c\/h3\u003e\n\u003cp\u003eGeneral Tech Services LLC supplies genuine Barton stock in the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for pricing, stock availability and lead time.\u003c\/p\u003e\n\u003ch3\u003eWho This Product Is Best For\u003c\/h3\u003e\n\u003cp\u003eThe Barton 7246 is well suited for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eProduction, process and transfer lines in oil and gas\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow-viscosity liquid measurement where accuracy matters\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSmall-line and low-flow applications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReplacing an existing Barton 7000 series meter like-for-like\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eApplications requiring bidirectional flow measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Specify \u0026amp; Install It\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConfirm the flow range:\u003c\/strong\u003e Check that your normal and maximum flow fall within the listed 13-130 US GPM range and that the liquid is suitable for a turbine meter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eProvide the required straight run:\u003c\/strong\u003e Install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream, as specified by Barton.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConnect the output:\u003c\/strong\u003e Connect the pickup coil to your flow computer or readout and enter the meter's K-factor from its calibration certificate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eVerify application details:\u003c\/strong\u003e Confirm the meter materials, pressure rating and electronics against the Barton datasheet and your process requirements before ordering.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow does a turbine flow meter work?\u003c\/strong\u003e\u003cbr\u003eLiquid turns a balanced rotor, while a pickup coil senses each blade and produces pulses in proportion to flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich liquids suit the Barton 7246?\u003c\/strong\u003e\u003cbr\u003eBarton's 7000 series is designed for low-viscosity liquids, including hydrocarbon liquids. Confirm viscosity and material compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Barton 7246?\u003c\/strong\u003e\u003cbr\u003eBarton's published series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the meter need straight pipe?\u003c\/strong\u003e\u003cbr\u003eYes. Barton specifies straight pipe of the same diameter with at least 10 diameters of straight run upstream for accurate operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose the 7246 or another size?\u003c\/strong\u003e\u003cbr\u003eSize the meter according to your required flow range, not simply the pipe size. The 7246 is listed for 13-130 US GPM. For lower flows, consider the Barton 7245. For higher flows, consider the Barton 7202. Contact General Tech to confirm the suitable model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure reverse flow?\u003c\/strong\u003e\u003cbr\u003eThe 7000 series has a symmetrical bidirectional design, and electronic options can sense flow direction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs genuine Barton stock available with UAE shipping?\u003c\/strong\u003e\u003cbr\u003eYes. Genuine Barton stock ships free across the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for current pricing and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e","brand":"Barton","offers":[{"title":"Default Title","offer_id":42170171818097,"sku":"TFM\/7246\/1-1\/2 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/barton-turbine-flow-meters-default-title-barton-7246-rf-meter-meter-size-1-1-2-inch-end-connection-size-2-inch-flow-rate-13-130-us-gpm-25381834850417.jpg?v=1761752018"},{"product_id":"barton-7202-rf-meter-meter-size-2-inch-end-connection-size-2-inch-flow-rate-24-240-us-gpm","title":"Barton 7202 RF meter, meter Size :2 inch,End Connection Size :2 inch,Flow Rate :24-240 US GPM","description":"\u003cp\u003e\u003cstrong\u003eModel 7202 · 2\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Barton 7202 is a 2\" liquid turbine flow meter from Barton's Model 7200 range, listed for 24-240 US GPM. It suits low-viscosity liquids including hydrocarbons. Genuine Barton stock at General Tech Services LLC, UAE, with free UAE-wide shipping. Request a quote in under a minute - call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e \u003cstrong\u003e7202\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eContact Number:\u003c\/strong\u003e \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMid-size liquid lines in production, process and transfer service need a meter that can measure accurately across a wide flow range. The Barton 7202 is a 2\" turbine meter listed for 24-240 US GPM.\u003c\/p\u003e\n\u003cp\u003eA turbine flow meter places a balanced rotor in the liquid stream. Flow turns the rotor at a speed proportional to flow rate, while a pickup coil on the meter body senses each passing blade tip and produces a pulse signal. Counting the pulses gives volume, and their frequency gives flow rate. The rotor is the only moving part.\u003c\/p\u003e\n\u003cp\u003eThe Barton 7202 belongs to Barton's Model 7200 line, which covers 3\/8 to 3 inch meters. Model 7200 meters use self-lubricating precision stainless steel ball bearings with dry-lubricant-impregnated ball separators, suited to low-flow, small-line duty. Barton's 7000 series uses a symmetrical bidirectional design, allowing flow measurement in either direction where capacities are the same both ways.\u003c\/p\u003e\n\u003cp\u003eBarton's published series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading. For accurate results, install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream. Confirm materials, pressure rating and electronics against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003cp\u003eNeed a different size or model line? Compare the Barton 7246 (1-1\/2\", 13-130 US GPM), Barton 7203 (3\", 58-580 US GPM), or Barton 7102 (2\", 24-240 US GPM).\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e2\" meter listed for 24-240 US GPM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRotor is the only moving part, keeping maintenance simple\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSelf-lubricating stainless steel ball bearings for long service life\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBidirectional design measures flow in either direction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePulse output adapts readily to many flow computers and readouts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSuitable for low-viscosity liquid measurement, including hydrocarbon applications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGenuine Barton stock with free UAE-wide shipping\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eContact Details\u003c\/h3\u003e\n\u003cp\u003eGeneral Tech Services LLC supplies genuine Barton stock in the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for pricing, stock availability and lead time.\u003c\/p\u003e\n\u003ch3\u003eWho This Product Is Best For\u003c\/h3\u003e\n\u003cp\u003eThe Barton 7202 is well suited for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eProduction, process and transfer lines in oil and gas\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow-viscosity liquid measurement where accuracy matters\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSmall-line and low-flow applications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReplacing an existing Barton 7000 series meter like-for-like\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eApplications requiring bidirectional flow measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Specify \u0026amp; Install It\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConfirm the flow range:\u003c\/strong\u003e Check that your normal and maximum flow fall within the listed 24-240 US GPM range and that the liquid is suitable for a turbine meter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eProvide the required straight run:\u003c\/strong\u003e Install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream, as specified by Barton.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConnect the output:\u003c\/strong\u003e Connect the pickup coil to your flow computer or readout and enter the meter's K-factor from its calibration certificate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eVerify application details:\u003c\/strong\u003e Confirm the meter materials, pressure rating and electronics against the Barton datasheet and your process requirements before ordering.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow does a turbine flow meter work?\u003c\/strong\u003e\u003cbr\u003eLiquid turns a balanced rotor, while a pickup coil senses each blade and produces pulses in proportion to flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich liquids suit the Barton 7202?\u003c\/strong\u003e\u003cbr\u003eBarton's 7000 series is designed for low-viscosity liquids, including hydrocarbon liquids. Confirm viscosity and material compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Barton 7202?\u003c\/strong\u003e\u003cbr\u003eBarton's published series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the meter need straight pipe?\u003c\/strong\u003e\u003cbr\u003eYes. Barton specifies straight pipe of the same diameter with at least 10 diameters of straight run upstream for accurate operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose the 7202 or another size?\u003c\/strong\u003e\u003cbr\u003eSize the meter according to your required flow range, not simply the pipe size. The 7202 is listed for 24-240 US GPM. For lower flows, consider the Barton 7246. For higher flows, consider the Barton 7203. Contact General Tech to confirm the suitable model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure reverse flow?\u003c\/strong\u003e\u003cbr\u003eThe 7000 series has a symmetrical bidirectional design, and electronic options can sense flow direction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs genuine Barton stock available with UAE shipping?\u003c\/strong\u003e\u003cbr\u003eYes. Genuine Barton stock ships free across the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for current pricing and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e","brand":"Barton","offers":[{"title":"Default Title","offer_id":42170171850865,"sku":"TFM\/7202\/2 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/barton-turbine-flow-meters-default-title-barton-7202-rf-meter-meter-size-2-inch-end-connection-size-2-inch-flow-rate-24-240-us-gpm-25381834915953.jpg?v=1761752017"},{"product_id":"barton-7203-rf-meter-meter-size-3-inch-end-connection-size-2-inch-flow-rate-58-580-us-gpm","title":"Barton 7203 RF meter, meter Size :3 inch,End Connection Size :2 inch,Flow Rate :58-580 US GPM","description":"\u003cp\u003e\u003cstrong\u003eModel 7203 · 3\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Barton 7203 is a 3\" liquid turbine flow meter from Barton's Model 7200 range, listed for 58-580 US GPM. It suits low-viscosity liquids including hydrocarbons. Genuine Barton stock at General Tech Services LLC, UAE, with free UAE-wide shipping. Request a quote in under a minute - call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e \u003cstrong\u003e7203\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eContact Number:\u003c\/strong\u003e \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMid-size liquid lines in production, process and transfer service need a meter that can measure accurately across a wide flow range. The Barton 7203 is a 3\" turbine meter listed for 58-580 US GPM.\u003c\/p\u003e\n\u003cp\u003eA turbine flow meter places a balanced rotor in the liquid stream. Flow turns the rotor at a speed proportional to flow rate, while a pickup coil on the meter body senses each passing blade tip and produces a pulse signal. Counting the pulses gives volume, and their frequency gives flow rate. The rotor is the only moving part.\u003c\/p\u003e\n\u003cp\u003eThe Barton 7203 belongs to Barton's Model 7200 line, which covers 3\/8 to 3 inch meters. Model 7200 meters use self-lubricating precision stainless steel ball bearings with dry-lubricant-impregnated ball separators, suited to low-flow, small-line duty. Barton's 7000 series uses a symmetrical bidirectional design, allowing flow measurement in either direction where capacities are the same both ways.\u003c\/p\u003e\n\u003cp\u003eBarton's published series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading. For accurate results, install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream. Confirm materials, pressure rating and electronics against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003cp\u003eNeed a different size or model line? Compare the Barton 7202 (2\", 24-240 US GPM) or the Barton 7103 (3\", 70-700 US GPM).\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e3\" meter listed for 58-580 US GPM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRotor is the only moving part, keeping maintenance simple\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSelf-lubricating stainless steel ball bearings for long service life\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBidirectional design measures flow in either direction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePulse output adapts readily to many flow computers and readouts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSuitable for low-viscosity liquid measurement, including hydrocarbon applications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGenuine Barton stock with free UAE-wide shipping\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eContact Details\u003c\/h3\u003e\n\u003cp\u003eGeneral Tech Services LLC supplies genuine Barton stock in the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for pricing, stock availability and lead time.\u003c\/p\u003e\n\u003ch3\u003eWho This Product Is Best For\u003c\/h3\u003e\n\u003cp\u003eThe Barton 7203 is well suited for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eProduction, process and transfer lines in oil and gas\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow-viscosity liquid measurement where accuracy matters\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSmall-line and low-flow applications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eReplacing an existing Barton 7000 series meter like-for-like\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eApplications requiring bidirectional flow measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Specify \u0026amp; Install It\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConfirm the flow range:\u003c\/strong\u003e Check that your normal and maximum flow fall within the listed 58-580 US GPM range and that the liquid is suitable for a turbine meter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eProvide the required straight run:\u003c\/strong\u003e Install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream, as specified by Barton.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConnect the output:\u003c\/strong\u003e Connect the pickup coil to your flow computer or readout and enter the meter's K-factor from its calibration certificate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eVerify application details:\u003c\/strong\u003e Confirm the meter materials, pressure rating and electronics against the Barton datasheet and your process requirements before ordering.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow does a turbine flow meter work?\u003c\/strong\u003e\u003cbr\u003eLiquid turns a balanced rotor, while a pickup coil senses each blade and produces pulses in proportion to flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich liquids suit the Barton 7203?\u003c\/strong\u003e\u003cbr\u003eBarton's 7000 series is designed for low-viscosity liquids, including hydrocarbon liquids. Confirm viscosity and material compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Barton 7203?\u003c\/strong\u003e\u003cbr\u003eBarton's published series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the meter need straight pipe?\u003c\/strong\u003e\u003cbr\u003eYes. Barton specifies straight pipe of the same diameter with at least 10 diameters of straight run upstream for accurate operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose the 7203 or another size?\u003c\/strong\u003e\u003cbr\u003eSize the meter according to your required flow range, not simply the pipe size. The 7203 is listed for 58-580 US GPM. For lower flows, consider the Barton 7202. Contact General Tech to confirm the suitable model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure reverse flow?\u003c\/strong\u003e\u003cbr\u003eThe 7000 series has a symmetrical bidirectional design, and electronic options can sense flow direction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs genuine Barton stock available with UAE shipping?\u003c\/strong\u003e\u003cbr\u003eYes. Genuine Barton stock ships free across the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for current pricing and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e","brand":"Barton","offers":[{"title":"Default Title","offer_id":42170171916401,"sku":"TFM\/7203\/3 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/barton-turbine-flow-meters-default-title-barton-7203-rf-meter-meter-size-3-inch-end-connection-size-2-inch-flow-rate-58-580-us-gpm-25381834981489.jpg?v=1761752017"},{"product_id":"barton-7304-rf-meter-meter-size-4-inch-end-connection-size-3-inch-flow-rate-115-1150-us-gpm","title":"Barton 7304 RF meter, meter Size :4 inch,End Connection Size :3 inch,Flow Rate :115-1150 US GPM","description":"\u003cp\u003e\u003cstrong\u003eModel 7304 · 4\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Barton 7304 is a 4\" liquid turbine flow meter from Barton's Model 7300 range, listed for 115-1150 US GPM. It suits low-viscosity liquids including hydrocarbons. Genuine Barton stock at General Tech Services LLC, UAE, with free UAE-wide shipping. Request a quote in under a minute - call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e \u003cstrong\u003e7304\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eContact Number:\u003c\/strong\u003e \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOn large liquid lines, small measurement errors add up to large volumes. The Barton 7304 is a 4\" turbine meter listed for 115-1150 US GPM, built for high-volume liquid measurement.\u003c\/p\u003e\n\u003cp\u003eA turbine flow meter places a balanced rotor in the liquid stream. Flow turns the rotor at a speed proportional to flow rate, and a pickup coil on the meter body senses each passing blade tip, producing a pulse signal. Counting the pulses gives volume, and their frequency gives flow rate. The rotor is the only moving part.\u003c\/p\u003e\n\u003cp\u003eThe Barton 7304 belongs to Barton's Model 7300 line, which covers 4 to 12 inch meters. Model 7300 meters use tungsten carbide sleeve bearings and give a higher-resolution output, with more pulses per unit volume, which helps on large lines. Barton's 7000 series uses a symmetrical bidirectional design, so it can measure flow in either direction where capacities are the same both ways.\u003c\/p\u003e\n\u003cp\u003eBarton's published series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading. For accurate results, install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream. Confirm materials, pressure rating and electronics against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003cp\u003eNeed a different size or model line? Compare the Barton 7306 (6\", 250-2250 US GPM) or the Barton 7104 (4\", 105-1250 US GPM).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e4\" meter listed for 115-1150 US GPM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRotor is the only moving part, keeping maintenance simple\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTungsten carbide sleeve bearings for long service life\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBidirectional design measures flow in either direction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePulse output adapts readily to many flow computers and readouts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGenuine Barton stock with free UAE-wide shipping\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContact Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Tech Services LLC supplies genuine Barton stock in the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for pricing and stock availability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho This Product Is Best For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eHigh-volume hydrocarbon liquid transfer and pipelines\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTerminal and storage measurement points\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eApplications where custody-transfer-grade metering is considered\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Specify \u0026amp; Install It\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eCheck that your normal and maximum flow fall within 115-1150 US GPM, and that your liquid suits a turbine meter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInstall in straight pipe of the same diameter, with at least 10 diameters of straight run upstream, as the Barton manual specifies.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConnect the pickup coil to your flow computer or readout and enter the meter's K-factor from its calibration certificate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does a turbine flow meter work?\u003c\/strong\u003e\u003cbr\u003eLiquid turns a balanced rotor; a pickup coil senses each blade and produces pulses in proportion to flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich liquids suit the Barton 7304?\u003c\/strong\u003e\u003cbr\u003eBarton's 7000 series is designed for low-viscosity liquids, including hydrocarbon liquids. Confirm viscosity and compatibility with our team.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Barton 7304?\u003c\/strong\u003e\u003cbr\u003eBarton's series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the meter need straight pipe?\u003c\/strong\u003e\u003cbr\u003eYes. Barton specifies straight pipe of the same diameter with at least 10 diameters upstream for accurate operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose the 7304 or another size?\u003c\/strong\u003e\u003cbr\u003eSize the meter to your flow, not the pipe. The 7304 is listed for 115-1150 US GPM. For higher flows, see the Barton 7306. Contact our team to confirm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure reverse flow?\u003c\/strong\u003e\u003cbr\u003eThe 7000 series has a symmetrical bidirectional design, and electronic options can sense flow direction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs genuine Barton stock available with UAE shipping?\u003c\/strong\u003e\u003cbr\u003eYes. Genuine Barton stock ships free across the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for current pricing and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Barton","offers":[{"title":"Default Title","offer_id":42170171949169,"sku":"TFM\/7304\/4 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/barton-turbine-flow-meters-default-title-barton-7304-rf-meter-meter-size-4-inch-end-connection-size-3-inch-flow-rate-115-1150-us-gpm-25381835047025.jpg?v=1761752016"},{"product_id":"barton-7306-rf-meter-meter-size-6-inch-end-connection-size-2-inch-flow-rate-250-2250-us-gpm","title":"Barton 7306 RF meter, meter Size :6 inch,End Connection Size :2 inch,Flow Rate :250-2250 US GPM","description":"\u003cp\u003e\u003cstrong\u003eModel 7306 · 6\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Barton 7306 is a 6\" liquid turbine flow meter from Barton's Model 7300 range, listed for 250-2250 US GPM. It suits low-viscosity liquids including hydrocarbons. Genuine Barton stock at General Tech Services LLC, UAE, with free UAE-wide shipping. Request a quote in under a minute - call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e \u003cstrong\u003e7306\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eContact Number:\u003c\/strong\u003e \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOn large liquid lines, small measurement errors add up to large volumes. The Barton 7306 is a 6\" turbine meter listed for 250-2250 US GPM, built for high-volume liquid measurement.\u003c\/p\u003e\n\u003cp\u003eA turbine flow meter places a balanced rotor in the liquid stream. Flow turns the rotor at a speed proportional to flow rate, and a pickup coil on the meter body senses each passing blade tip, producing a pulse signal. Counting the pulses gives volume, and their frequency gives flow rate. The rotor is the only moving part.\u003c\/p\u003e\n\u003cp\u003eThe Barton 7306 belongs to Barton's Model 7300 line, which covers 4 to 12 inch meters. Model 7300 meters use tungsten carbide sleeve bearings and give a higher-resolution output, with more pulses per unit volume, which helps on large lines. Barton's 7000 series uses a symmetrical bidirectional design, so it can measure flow in either direction where capacities are the same both ways.\u003c\/p\u003e\n\u003cp\u003eBarton's published series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading. For accurate results, install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream. Confirm materials, pressure rating and electronics against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003cp\u003eNeed a different size or model line? Compare the Barton 7304 (4\", 115-1150 US GPM), Barton 7308 (8\", 540-5400 US GPM), or Barton 7106 (6\", 250-2500 US GPM).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e6\" meter listed for 250-2250 US GPM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRotor is the only moving part, keeping maintenance simple\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTungsten carbide sleeve bearings for long service life\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBidirectional design measures flow in either direction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePulse output adapts readily to many flow computers and readouts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGenuine Barton stock with free UAE-wide shipping\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContact Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Tech Services LLC supplies genuine Barton stock in the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for pricing and stock availability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho This Product Is Best For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eHigh-volume hydrocarbon liquid transfer and pipelines\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTerminal and storage measurement points\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eApplications where custody-transfer-grade metering is considered\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Specify \u0026amp; Install It\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eCheck that your normal and maximum flow fall within 250-2250 US GPM, and that your liquid suits a turbine meter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInstall in straight pipe of the same diameter, with at least 10 diameters of straight run upstream, as the Barton manual specifies.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConnect the pickup coil to your flow computer or readout and enter the meter's K-factor from its calibration certificate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does a turbine flow meter work?\u003c\/strong\u003e\u003cbr\u003eLiquid turns a balanced rotor; a pickup coil senses each blade and produces pulses in proportion to flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich liquids suit the Barton 7306?\u003c\/strong\u003e\u003cbr\u003eBarton's 7000 series is designed for low-viscosity liquids, including hydrocarbon liquids. Confirm viscosity and compatibility with our team.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Barton 7306?\u003c\/strong\u003e\u003cbr\u003eBarton's series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the meter need straight pipe?\u003c\/strong\u003e\u003cbr\u003eYes. Barton specifies straight pipe of the same diameter with at least 10 diameters upstream for accurate operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose the 7306 or another size?\u003c\/strong\u003e\u003cbr\u003eSize the meter to your flow, not the pipe. The 7306 is listed for 250-2250 US GPM. For lower flows, see the Barton 7304. For higher flows, see the Barton 7308. Contact our team to confirm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure reverse flow?\u003c\/strong\u003e\u003cbr\u003eThe 7000 series has a symmetrical bidirectional design, and electronic options can sense flow direction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs genuine Barton stock available with UAE shipping?\u003c\/strong\u003e\u003cbr\u003eYes. Genuine Barton stock ships free across the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for current pricing and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e","brand":"Barton","offers":[{"title":"Default Title","offer_id":42170172014705,"sku":"TFM\/7306\/6 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/barton-turbine-flow-meters-default-title-barton-7306-rf-meter-meter-size-6-inch-end-connection-size-2-inch-flow-rate-250-2250-us-gpm-25381835374705.jpg?v=1761752014"},{"product_id":"barton-7308-rf-meter-meter-size-8-inch-end-connection-size-2-inch-flow-rate-540-5400-us-gpm","title":"Barton 7308 RF meter, meter Size :8 inch,End Connection Size :2 inch,Flow Rate :540-5400 US GPM","description":"\u003cp\u003e\u003cstrong\u003eModel 7308 · 8\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Barton 7308 is an 8\" liquid turbine flow meter from Barton's Model 7300 range, listed for 540-5400 US GPM. It suits low-viscosity liquids including hydrocarbons. Genuine Barton stock at General Tech Services LLC, UAE, with free UAE-wide shipping. Request a quote in under a minute - call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 7308\u003cbr\u003e\u003cstrong\u003eContact Number:\u003c\/strong\u003e \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOn large liquid lines, small measurement errors add up to large volumes. The Barton 7308 is an 8\" turbine meter listed for 540-5400 US GPM, built for high-volume liquid measurement.\u003c\/p\u003e\n\u003cp\u003eA turbine flow meter places a balanced rotor in the liquid stream. Flow turns the rotor at a speed proportional to flow rate, and a pickup coil on the meter body senses each passing blade tip, producing a pulse signal. Counting the pulses gives volume, and their frequency gives flow rate. The rotor is the only moving part.\u003c\/p\u003e\n\u003cp\u003eThe Barton 7308 belongs to Barton's Model 7300 line, which covers 4 to 12 inch meters. Model 7300 meters use tungsten carbide sleeve bearings and give a higher-resolution output, with more pulses per unit volume, which helps on large lines. Barton's 7000 series uses a symmetrical bidirectional design, so it can measure flow in either direction where capacities are the same both ways.\u003c\/p\u003e\n\u003cp\u003eBarton's published series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading. For accurate results, install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream. Confirm materials, pressure rating and electronics against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003cp\u003eNeed a different size or model line? Compare the Barton 7306 (6\", 250-2250 US GPM), Barton 7310 (10\", 800-8000 US GPM), or Barton 7108 (8\", 540-5400 US GPM).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e8\" meter listed for 540-5400 US GPM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRotor is the only moving part, keeping maintenance simple\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTungsten carbide sleeve bearings for long service life\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBidirectional design measures flow in either direction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePulse output adapts readily to many flow computers and readouts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGenuine Barton stock with free UAE-wide shipping\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContact Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Tech Services LLC supplies genuine Barton stock in the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for pricing and stock availability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho This Product Is Best For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eHigh-volume hydrocarbon liquid transfer and pipelines\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTerminal and storage measurement points\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eApplications where custody-transfer-grade metering is considered\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Specify \u0026amp; Install It\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eCheck that your normal and maximum flow fall within 540-5400 US GPM, and that your liquid suits a turbine meter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInstall in straight pipe of the same diameter, with at least 10 diameters of straight run upstream, as the Barton manual specifies.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConnect the pickup coil to your flow computer or readout and enter the meter's K-factor from its calibration certificate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does a turbine flow meter work?\u003c\/strong\u003e\u003cbr\u003eLiquid turns a balanced rotor; a pickup coil senses each blade and produces pulses in proportion to flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich liquids suit the Barton 7308?\u003c\/strong\u003e\u003cbr\u003eBarton's 7000 series is designed for low-viscosity liquids, including hydrocarbon liquids. Confirm viscosity and compatibility with our team.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Barton 7308?\u003c\/strong\u003e\u003cbr\u003eBarton's series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the meter need straight pipe?\u003c\/strong\u003e\u003cbr\u003eYes. Barton specifies straight pipe of the same diameter with at least 10 diameters upstream for accurate operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose the 7308 or another size?\u003c\/strong\u003e\u003cbr\u003eSize the meter to your flow, not the pipe. The 7308 is listed for 540-5400 US GPM. For lower flows, see the Barton 7306. For higher flows, see the Barton 7310. Contact our team to confirm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure reverse flow?\u003c\/strong\u003e\u003cbr\u003eThe 7000 series has a symmetrical bidirectional design, and electronic options can sense flow direction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs genuine Barton stock available with UAE shipping?\u003c\/strong\u003e\u003cbr\u003eYes. Genuine Barton stock ships free across the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for current pricing and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e","brand":"Barton","offers":[{"title":"Default Title","offer_id":42170172113009,"sku":"TFM\/7308\/8 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/barton-turbine-flow-meters-default-title-barton-7308-rf-meter-meter-size-8-inch-end-connection-size-2-inch-flow-rate-540-5400-us-gpm-25381835440241.jpg?v=1761752014"},{"product_id":"barton-7310-rf-meter-meter-size-10-inch-end-connection-size-2-inch-flow-rate-800-8000-us-gpm","title":"Barton 7310 RF meter, meter Size :10 inch,End Connection Size :2 inch,Flow Rate :800-8000 US GPM","description":"\u003cp\u003eThe Barton 7310 is a 10\" liquid turbine flow meter from Barton's Model 7300 range, listed for 800-8000 US GPM. It suits low-viscosity liquids including hydrocarbons. Genuine Barton stock at General Tech Services LLC, UAE, with free UAE-wide shipping. Request a quote in under a minute - call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 7310\u003cbr\u003e\u003cstrong\u003eContact Number:\u003c\/strong\u003e \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOn large liquid lines, small measurement errors can add up to large volumes. The Barton 7310 is a 10\" turbine meter listed for 800-8000 US GPM, built for high-volume liquid measurement.\u003c\/p\u003e\n\u003cp\u003eA turbine flow meter places a balanced rotor in the liquid stream. Flow turns the rotor at a speed proportional to flow rate, and a pickup coil on the meter body senses each passing blade tip, producing a pulse signal. Counting the pulses gives volume, while their frequency gives flow rate. The rotor is the only moving part.\u003c\/p\u003e\n\u003cp\u003eThe Barton 7310 belongs to Barton's Model 7300 line, which covers 4 to 12 inch meters. Model 7300 meters use tungsten carbide sleeve bearings and provide a higher-resolution output, with more pulses per unit volume, which helps on large lines. Barton's 7000 series uses a symmetrical bidirectional design, so it can measure flow in either direction where capacities are the same both ways.\u003c\/p\u003e\n\u003cp\u003eBarton's published series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading. For accurate results, install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream. Confirm materials, pressure rating and electronics against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003cp\u003eNeed a different size or model line? Compare the Barton 7308 (8\", 540-5400 US GPM) or the Barton 7312 (12\", 1250-12500 US GPM).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e10\" meter listed for 800-8000 US GPM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRotor is the only moving part, keeping maintenance simple\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTungsten carbide sleeve bearings for long service life\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBidirectional design measures flow in either direction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePulse output adapts readily to many flow computers and readouts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGenuine Barton stock with free UAE-wide shipping\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContact Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Tech Services LLC supplies genuine Barton stock in the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for pricing, stock availability and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho This Product Is Best For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eHigh-volume hydrocarbon liquid transfer and pipelines\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTerminal and storage measurement points\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eApplications where custody-transfer-grade metering is considered\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Specify \u0026amp; Install It\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eCheck that your normal and maximum flow fall within 800-8000 US GPM, and that your liquid suits a turbine meter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInstall in straight pipe of the same diameter, with at least 10 diameters of straight run upstream, as the Barton manual specifies.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConnect the pickup coil to your flow computer or readout and enter the meter's K-factor from its calibration certificate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConfirm the meter's materials, pressure rating, electronics and process compatibility against the Barton datasheet before commissioning.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVerify the flow signal and system configuration before putting the meter into normal service.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does a turbine flow meter work?\u003c\/strong\u003e\u003cbr\u003eLiquid turns a balanced rotor; a pickup coil senses each blade and produces pulses in proportion to flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich liquids suit the Barton 7310?\u003c\/strong\u003e\u003cbr\u003eBarton's 7000 series is designed for low-viscosity liquids, including hydrocarbon liquids. Confirm viscosity and compatibility with our team.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Barton 7310?\u003c\/strong\u003e\u003cbr\u003eBarton's series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the meter need straight pipe?\u003c\/strong\u003e\u003cbr\u003eYes. Barton specifies straight pipe of the same diameter with at least 10 diameters upstream for accurate operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose the 7310 or another size?\u003c\/strong\u003e\u003cbr\u003eSize the meter to your actual flow, not simply the pipe size. The 7310 is listed for 800-8000 US GPM. For lower flows, see the Barton 7308. For higher flows, see the Barton 7312. Contact our team to confirm the correct model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure reverse flow?\u003c\/strong\u003e\u003cbr\u003eThe 7000 series has a symmetrical bidirectional design, and electronic options can sense flow direction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs genuine Barton stock available with UAE shipping?\u003c\/strong\u003e\u003cbr\u003eYes. Genuine Barton stock ships free across the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for current pricing and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e","brand":"Barton","offers":[{"title":"Default Title","offer_id":42170172145777,"sku":"TFM\/7310\/10 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/barton-turbine-flow-meters-default-title-barton-7310-rf-meter-meter-size-10-inch-end-connection-size-2-inch-flow-rate-800-8000-us-gpm-25381835505777.jpg?v=1761752014"},{"product_id":"barton-7312-rf-meter-meter-size-12-inch-end-connection-size-2-inch-flow-rate-1250-12500-us-gpm","title":"Barton 7312 RF meter, meter Size :12 inch ,End Connection Size :2 inch,Flow Rate :1250-12500 US GPM","description":"\u003cp\u003eThe Barton 7312 is a 12\" liquid turbine flow meter from Barton's Model 7300 range, listed for 1250-12500 US GPM. It suits low-viscosity liquids including hydrocarbons. Genuine Barton stock at General Tech Services LLC, UAE, with free UAE-wide shipping. Request a quote in under a minute - call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number:\u003c\/strong\u003e 7312\u003cbr\u003e\u003cstrong\u003eContact Number:\u003c\/strong\u003e \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOn large liquid lines, small measurement errors can add up to large volumes. The Barton 7312 is a 12\" turbine meter listed for 1250-12500 US GPM, built for high-volume liquid measurement.\u003c\/p\u003e\n\u003cp\u003eA turbine flow meter places a balanced rotor in the liquid stream. Flow turns the rotor at a speed proportional to flow rate, and a pickup coil on the meter body senses each passing blade tip, producing a pulse signal. Counting the pulses gives volume, while their frequency gives flow rate. The rotor is the only moving part.\u003c\/p\u003e\n\u003cp\u003eThe Barton 7312 belongs to Barton's Model 7300 line, which covers 4 to 12 inch meters. Model 7300 meters use tungsten carbide sleeve bearings and provide a higher-resolution output, with more pulses per unit volume, which helps on large lines. Barton's 7000 series uses a symmetrical bidirectional design, so it can measure flow in either direction where capacities are the same both ways.\u003c\/p\u003e\n\u003cp\u003eBarton's published series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading. For accurate results, install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream. Confirm materials, pressure rating and electronics against the Barton datasheet and your process before ordering.\u003c\/p\u003e\n\u003cp\u003eNeed a different size or model line? Compare the Barton 7310 (10\", 800-8000 US GPM).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e12\" meter listed for 1250-12500 US GPM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRotor is the only moving part, keeping maintenance simple\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTungsten carbide sleeve bearings for long service life\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBidirectional design measures flow in either direction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePulse output adapts readily to many flow computers and readouts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGenuine Barton stock with free UAE-wide shipping\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContact Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Tech Services LLC supplies genuine Barton stock in the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for pricing, stock availability and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho This Product Is Best For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eHigh-volume hydrocarbon liquid transfer and pipelines\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTerminal and storage measurement points\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eApplications where custody-transfer-grade metering is considered\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Specify \u0026amp; Install It\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eCheck that your normal and maximum flow fall within 1250-12500 US GPM, and that your liquid suits a turbine meter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInstall in straight pipe of the same diameter, with at least 10 diameters of straight run upstream, as the Barton manual specifies.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConnect the pickup coil to your flow computer or readout and enter the meter's K-factor from its calibration certificate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConfirm the meter's materials, pressure rating, electronics and process compatibility against the Barton datasheet before commissioning.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVerify the flow signal and system configuration before putting the meter into normal service.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does a turbine flow meter work?\u003c\/strong\u003e\u003cbr\u003eLiquid turns a balanced rotor; a pickup coil senses each blade and produces pulses in proportion to flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich liquids suit the Barton 7312?\u003c\/strong\u003e\u003cbr\u003eBarton's 7000 series is designed for low-viscosity liquids, including hydrocarbon liquids. Confirm viscosity and compatibility with our team.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Barton 7312?\u003c\/strong\u003e\u003cbr\u003eBarton's series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the meter need straight pipe?\u003c\/strong\u003e\u003cbr\u003eYes. Barton specifies straight pipe of the same diameter with at least 10 diameters upstream for accurate operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose the 7312 or another size?\u003c\/strong\u003e\u003cbr\u003eSize the meter to your actual flow, not simply the pipe size. The 7312 is listed for 1250-12500 US GPM. For lower flows, see the Barton 7310. Contact our team to confirm the correct model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it measure reverse flow?\u003c\/strong\u003e\u003cbr\u003eThe 7000 series has a symmetrical bidirectional design, and electronic options can sense flow direction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs genuine Barton stock available with UAE shipping?\u003c\/strong\u003e\u003cbr\u003eYes. Genuine Barton stock ships free across the UAE. Call \u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e for current pricing and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e+971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e","brand":"Barton","offers":[{"title":"Default Title","offer_id":42170172538993,"sku":"TFM\/7312\/12 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/barton-turbine-flow-meters-default-title-barton-7312-rf-meter-meter-size-12-inch-end-connection-size-2-inch-flow-rate-1250-12500-us-gpm-25381835571313.jpg?v=1761752014"},{"product_id":"nuflo-liquid-ez-in-rf-meter-line-size-3-8-inch-end-connection-size-1-inch-flow-rate-0-3-3-us-gpm","title":"Nuflo Liquid EZ-IN RF meter, Line Size :3\/8 inch,End Connection Size :1 inch,Flow Rate :0.3-3 US GPM","description":"\u003cp\u003eCameron trademarked Nuflo GT Gas flowmeters and Nuflo LT Liquid flowmeters are used widely as a replacement of traditional meters which assists with the correct and specific measurement in oil and gas industry. Both brands are designed and developed with an aim to measure liquid and gas flow without any errors. Moreover, easily replaceable cartridges in both systems provide low-cost maintenance. Our company provides both Nuflo GT and Nuflo LT flowmeters word wide with fast shipping option. Feel free to contact us via the form below and we will get back to you as soon as possible.\u003c\/p\u003e\n","brand":"Nuflo","offers":[{"title":"Default Title","offer_id":42170172571761,"sku":"TFM\/EZ-IN\/3\/8 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/nuflo-turbine-flow-meters-default-title-nuflo-liquid-ez-in-rf-meter-line-size-3-8-inch-end-connection-size-1-inch-flow-rate-0-3-3-us-gpm-25381835669617.png?v=1761752013"},{"product_id":"nuflo-liquid-ez-in-rf-meter-line-size-1-2inch-end-connection-size-1inch-flow-rate-0-75-7-5-us-gpm","title":"Nuflo Liquid EZ-IN RF meter, Line Size :1\/2inch,End Connection Size :1inch,Flow Rate :0.75-7.5 US GPM","description":"\u003cp\u003eCameron trademarked Nuflo GT Gas flowmeters and Nuflo LT Liquid flowmeters are used widely as a replacement of traditional meters which assists with the correct and specific measurement in oil and gas industry. Both brands are designed and developed with an aim to measure liquid and gas flow without any errors. Moreover, easily replaceable cartridges in both systems provide low-cost maintenance. Our company provides both Nuflo GT and Nuflo LT flowmeters word wide with fast shipping option. Feel free to contact us via the form below and we will get back to you as soon as possible.\u003c\/p\u003e\n","brand":"Nuflo","offers":[{"title":"Default Title","offer_id":42170172637297,"sku":"TFM\/EZ-IN\/1\/2 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/nuflo-turbine-flow-meters-default-title-nuflo-liquid-ez-in-rf-meter-line-size-1-2inch-end-connection-size-1inch-flow-rate-0-75-7-5-us-gpm-25381835735153.png?v=1761752012"},{"product_id":"nuflo-liquid-ez-in-rf-meter-line-size-3-4-inch-end-connection-size-1-inch-flow-rate-2-15-us-gpm","title":"Nuflo Liquid EZ-IN RF meter, Line Size :3\/4 inch,End Connection Size :1 inch,Flow Rate :2-15 US GPM","description":"\u003cp\u003eCameron trademarked Nuflo GT Gas flowmeters and Nuflo LT Liquid flowmeters are used widely as a replacement of traditional meters which assists with the correct and specific measurement in oil and gas industry. Both brands are designed and developed with an aim to measure liquid and gas flow without any errors. Moreover, easily replaceable cartridges in both systems provide low-cost maintenance. Our company provides both Nuflo GT and Nuflo LT flowmeters word wide with fast shipping option. Feel free to contact us via the form below and we will get back to you as soon as possible.\u003c\/p\u003e\n","brand":"Nuflo","offers":[{"title":"Default Title","offer_id":42170172670065,"sku":"TFM\/EZ-IN\/3\/4 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/nuflo-turbine-flow-meters-default-title-nuflo-liquid-ez-in-rf-meter-line-size-3-4-inch-end-connection-size-1-inch-flow-rate-2-15-us-gpm-25381836685425.png?v=1761752013"},{"product_id":"nuflo-liquid-ez-in-rf-meter-line-size-7-8inch-end-connection-size-1-inch-flow-rate-3-30-us-gpm","title":"Nuflo Liquid EZ-IN RF meter, Line Size :7\/8inch,End Connection Size :1 inch,Flow Rate :3-30 US GPM","description":"\u003cp\u003eCameron trademarked Nuflo GT Gas flowmeters and Nuflo LT Liquid flowmeters are used widely as a replacement of traditional meters which assists with the correct and specific measurement in oil and gas industry. Both brands are designed and developed with an aim to measure liquid and gas flow without any errors. Moreover, easily replaceable cartridges in both systems provide low-cost maintenance. Our company provides both Nuflo GT and Nuflo LT flowmeters word wide with fast shipping option. Feel free to contact us via the form below and we will get back to you as soon as possible.\u003c\/p\u003e\n","brand":"Nuflo","offers":[{"title":"Default Title","offer_id":42170172768369,"sku":"TFM\/EZ-IN\/7\/8 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/nuflo-turbine-flow-meters-default-title-nuflo-liquid-ez-in-rf-meter-line-size-7-8inch-end-connection-size-1-inch-flow-rate-3-30-us-gpm-25381836750961.png?v=1761752009"},{"product_id":"nuflo-liquid-ez-in-rf-meter-line-size-1-inch-end-connection-size-1-inch-flow-rate-5-50-us-gpm","title":"Nuflo Liquid EZ-IN RF meter, Line Size :1 inch,End Connection Size :1 inch,Flow Rate :5-50 US GPM","description":"\u003cp\u003eCameron trademarked Nuflo GT Gas flowmeters and Nuflo LT Liquid flowmeters are used widely as a replacement of traditional meters which assists with the correct and specific measurement in oil and gas industry. Both brands are designed and developed with an aim to measure liquid and gas flow without any errors. Moreover, easily replaceable cartridges in both systems provide low-cost maintenance. Our company provides both Nuflo GT and Nuflo LT flowmeters word wide with fast shipping option. Feel free to contact us via the form below and we will get back to you as soon as possible.\u003c\/p\u003e\n","brand":"Nuflo","offers":[{"title":"Default Title","offer_id":42170172801137,"sku":"TFM\/EZ-IN\/1 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/nuflo-turbine-flow-meters-default-title-nuflo-liquid-ez-in-rf-meter-line-size-1-inch-end-connection-size-1-inch-flow-rate-5-50-us-gpm-25381836816497.png?v=1761752009"},{"product_id":"nuflo-liquid-ez-in-rf-meter-line-size-3-8-inch-end-connection-size-2-inch-flow-rate-0-3-3-us-gpm","title":"Nuflo Liquid EZ-IN RF meter, Line Size :3\/8 inch,End Connection Size :2 inch,Flow Rate :0.3-3 US GPM","description":"\u003cp\u003eCameron trademarked Nuflo GT Gas flowmeters and Nuflo LT Liquid flowmeters are used widely as a replacement of traditional meters which assists with the correct and specific measurement in oil and gas industry. Both brands are designed and developed with an aim to measure liquid and gas flow without any errors. Moreover, easily replaceable cartridges in both systems provide low-cost maintenance. Our company provides both Nuflo GT and Nuflo LT flowmeters word wide with fast shipping option. Feel free to contact us via the form below and we will get back to you as soon as possible.\u003c\/p\u003e\n","brand":"Nuflo","offers":[{"title":"Default Title","offer_id":42170172833905,"sku":"TFM\/EZ-IN\/3\/8  inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/nuflo-turbine-flow-meters-default-title-nuflo-liquid-ez-in-rf-meter-line-size-3-8-inch-end-connection-size-2-inch-flow-rate-0-3-3-us-gpm-25381836882033.png?v=1761752009"},{"product_id":"nuflo-liquid-ez-in-rf-meter-line-size-1-1-2-inch-end-connection-size-2-inch-flow-rate-15-180-us-gpm","title":"Nuflo Liquid EZ-IN RF meter, Line Size :1-1\/2 inch,End Connection Size :2 inch,Flow Rate :15-180 US GPM","description":"\u003cp\u003eCameron trademarked Nuflo GT Gas flowmeters and Nuflo LT Liquid flowmeters are used widely as a replacement of traditional meters which assists with the correct and specific measurement in oil and gas industry. Both brands are designed and developed with an aim to measure liquid and gas flow without any errors. Moreover, easily replaceable cartridges in both systems provide low-cost maintenance. Our company provides both Nuflo GT and Nuflo LT flowmeters word wide with fast shipping option. Feel free to contact us via the form below and we will get back to you as soon as possible.\u003c\/p\u003e\n","brand":"Nuflo","offers":[{"title":"Default Title","offer_id":42170172866673,"sku":"TFM\/EZ-IN\/1-1\/2 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/nuflo-turbine-flow-meters-default-title-nuflo-liquid-ez-in-rf-meter-line-size-1-1-2-inch-end-connection-size-2-inch-flow-rate-15-180-us-gpm-25381836980337.png?v=1761752008"},{"product_id":"nuflo-liquid-ez-in-rf-meter-line-size-2-inch-end-connection-size-2-inch-flow-rate-40-400-us-gpm","title":"Nuflo Liquid EZ-IN RF meter, Line Size :2 inch,End Connection Size :2 inch,Flow Rate :40-400 US GPM","description":"\u003cp\u003eCameron trademarked Nuflo GT Gas flowmeters and Nuflo LT Liquid flowmeters are used widely as a replacement of traditional meters which assists with the correct and specific measurement in oil and gas industry. Both brands are designed and developed with an aim to measure liquid and gas flow without any errors. Moreover, easily replaceable cartridges in both systems provide low-cost maintenance. Our company provides both Nuflo GT and Nuflo LT flowmeters word wide with fast shipping option. Feel free to contact us via the form below and we will get back to you as soon as possible.\u003c\/p\u003e\n","brand":"Nuflo","offers":[{"title":"Default Title","offer_id":42170172899441,"sku":"TFM\/EZ-IN\/2 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/nuflo-turbine-flow-meters-default-title-nuflo-liquid-ez-in-rf-meter-line-size-2-inch-end-connection-size-2-inch-flow-rate-40-400-us-gpm-25381837209713.png?v=1761752009"},{"product_id":"nuflo-liquid-ez-in-rf-meter-line-size-3-inch-end-connection-size-3-inch-flow-rate-80-800-us-gpm","title":"Nuflo Liquid EZ-IN RF meter, Line Size :3 inch,End Connection Size :3 inch,Flow Rate :80-800 US GPM","description":"\u003cp\u003eCameron trademarked Nuflo GT Gas flowmeters and Nuflo LT Liquid flowmeters are used widely as a replacement of traditional meters which assists with the correct and specific measurement in oil and gas industry. Both brands are designed and developed with an aim to measure liquid and gas flow without any errors. Moreover, easily replaceable cartridges in both systems provide low-cost maintenance. Our company provides both Nuflo GT and Nuflo LT flowmeters word wide with fast shipping option. Feel free to contact us via the form below and we will get back to you as soon as possible.\u003c\/p\u003e\n","brand":"Nuflo","offers":[{"title":"Default Title","offer_id":42170172932209,"sku":"TFM\/EZ-IN\/3 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/nuflo-turbine-flow-meters-default-title-nuflo-liquid-ez-in-rf-meter-line-size-3-inch-end-connection-size-3-inch-flow-rate-80-800-us-gpm-25381837308017.png?v=1761752009"},{"product_id":"nuflo-liquid-ez-in-rf-meter-line-size-4-inch-end-connection-size-4-inch-flow-rate-100-1200-us-gpm","title":"Nuflo Liquid EZ-IN RF meter, Line Size :4 inch,End Connection Size :4 inch,Flow Rate :100-1200 US GPM","description":"\u003cp\u003eCameron trademarked Nuflo GT Gas flowmeters and Nuflo LT Liquid flowmeters are used widely as a replacement of traditional meters which assists with the correct and specific measurement in oil and gas industry. Both brands are designed and developed with an aim to measure liquid and gas flow without any errors. Moreover, easily replaceable cartridges in both systems provide low-cost maintenance. Our company provides both Nuflo GT and Nuflo LT flowmeters word wide with fast shipping option. Feel free to contact us via the form below and we will get back to you as soon as possible.\u003c\/p\u003e\n","brand":"Nuflo","offers":[{"title":"Default Title","offer_id":42170172964977,"sku":"TFM\/EZ-IN\/4 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/nuflo-turbine-flow-meters-default-title-nuflo-liquid-ez-in-rf-meter-line-size-4-inch-end-connection-size-4-inch-flow-rate-100-1200-us-gpm-25381837439089.png?v=1761752008"},{"product_id":"nuflo-liquid-ez-in-rf-meter-line-size-6-inch-end-connection-size-6-inch-flow-rate-250-2500-us-gpm","title":"Nuflo Liquid EZ-IN RF meter, Line Size :6 inch,End Connection Size :6 inch,Flow Rate :250-2500 US GPM","description":"\u003cp\u003eCameron trademarked Nuflo GT Gas flowmeters and Nuflo LT Liquid flowmeters are used widely as a replacement of traditional meters which assists with the correct and specific measurement in oil and gas industry. Both brands are designed and developed with an aim to measure liquid and gas flow without any errors. Moreover, easily replaceable cartridges in both systems provide low-cost maintenance. Our company provides both Nuflo GT and Nuflo LT flowmeters word wide with fast shipping option. Feel free to contact us via the form below and we will get back to you as soon as possible.\u003c\/p\u003e\n","brand":"Nuflo","offers":[{"title":"Default Title","offer_id":42170173030513,"sku":"TFM\/EZ-IN\/6 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/nuflo-turbine-flow-meters-default-title-nuflo-liquid-ez-in-rf-meter-line-size-6-inch-end-connection-size-6-inch-flow-rate-250-2500-us-gpm-25381837504625.png?v=1761752007"},{"product_id":"nuflo-liquid-ez-in-rf-meter-line-size-8-inch-end-connection-size-8-inch-flow-rate-350-3500-us-gpm","title":"Nuflo Liquid EZ-IN RF meter, Line Size :8 inch,End Connection Size :8 inch,Flow Rate :350-3500 US GPM","description":"\u003cp\u003eCameron trademarked Nuflo GT Gas flowmeters and Nuflo LT Liquid flowmeters are used widely as a replacement of traditional meters which assists with the correct and specific measurement in oil and gas industry. Both brands are designed and developed with an aim to measure liquid and gas flow without any errors. Moreover, easily replaceable cartridges in both systems provide low-cost maintenance. Our company provides both Nuflo GT and Nuflo LT flowmeters word wide with fast shipping option. Feel free to contact us via the form below and we will get back to you as soon as possible.\u003c\/p\u003e\n","brand":"Nuflo","offers":[{"title":"Default Title","offer_id":42170173063281,"sku":"TFM\/EZ-IN\/8 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/nuflo-turbine-flow-meters-default-title-nuflo-liquid-ez-in-rf-meter-line-size-8-inch-end-connection-size-8-inch-flow-rate-350-3500-us-gpm-25381837602929.png?v=1761752004"},{"product_id":"nuflo-liquid-npt-meter-line-size-3-8-inch-end-connection-size-1-inch-flow-rate-0-3-3-us-gpm","title":"Nuflo Liquid NPT meter, Line Size :3\/8 inch,End Connection Size :1 inch,Flow Rate :0.3-3 US GPM","description":"\u003cp\u003eCameron trademarked Nuflo GT Gas flowmeters and Nuflo LT Liquid flowmeters are used widely as a replacement of traditional meters which assists with the correct and specific measurement in oil and gas industry. Both brands are designed and developed with an aim to measure liquid and gas flow without any errors. Moreover, easily replaceable cartridges in both systems provide low-cost maintenance. Our company provides both Nuflo GT and Nuflo LT flowmeters word wide with fast shipping option. Feel free to contact us via the form below and we will get back to you as soon as possible.\u003c\/p\u003e\n","brand":"Nuflo","offers":[{"title":"Default Title","offer_id":42170173096049,"sku":"TFM\/NPT\/3\/8 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/nuflo-turbine-flow-meters-default-title-nuflo-liquid-npt-meter-line-size-3-8-inch-end-connection-size-1-inch-flow-rate-0-3-3-us-gpm-25381837734001.png?v=1761752004"},{"product_id":"nuflo-liquid-npt-meter-line-size-1-2-inch-end-connection-size-1-inch-flow-rate-0-75-7-5-us-gpm","title":"Nuflo Liquid NPT meter, Line Size :1\/2 inch,End Connection Size :1 inch ,Flow Rate :0.75-7.5 US GPM","description":"\u003cp\u003eCameron trademarked Nuflo GT Gas flowmeters and Nuflo LT Liquid flowmeters are used widely as a replacement of traditional meters which assists with the correct and specific measurement in oil and gas industry. Both brands are designed and developed with an aim to measure liquid and gas flow without any errors. Moreover, easily replaceable cartridges in both systems provide low-cost maintenance. Our company provides both Nuflo GT and Nuflo LT flowmeters word wide with fast shipping option. Feel free to contact us via the form below and we will get back to you as soon as possible.\u003c\/p\u003e\n","brand":"Nuflo","offers":[{"title":"Default Title","offer_id":42170173194353,"sku":"TFM\/NPT\/1\/2 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/nuflo-turbine-flow-meters-default-title-nuflo-liquid-npt-meter-line-size-1-2-inch-end-connection-size-1-inch-flow-rate-0-75-7-5-us-gpm-25381837799537.png?v=1761752003"},{"product_id":"nuflo-liquid-npt-meter-line-size-3-4-inch-end-connection-size-1-inch-flow-rate-2-15-us-gpm","title":"Nuflo Liquid NPT meter, Line Size :3\/4 inch ,End Connection Size :1 inch,Flow Rate :2-15 US GPM","description":"\u003cp\u003eCameron trademarked Nuflo GT Gas flowmeters and Nuflo LT Liquid flowmeters are used widely as a replacement of traditional meters which assists with the correct and specific measurement in oil and gas industry. Both brands are designed and developed with an aim to measure liquid and gas flow without any errors. Moreover, easily replaceable cartridges in both systems provide low-cost maintenance. Our company provides both Nuflo GT and Nuflo LT flowmeters word wide with fast shipping option. Feel free to contact us via the form below and we will get back to you as soon as possible.\u003c\/p\u003e\n","brand":"Nuflo","offers":[{"title":"Default Title","offer_id":42170173227121,"sku":"TFM\/NPT\/3\/4 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/nuflo-turbine-flow-meters-default-title-nuflo-liquid-npt-meter-line-size-3-4-inch-end-connection-size-1-inch-flow-rate-2-15-us-gpm-25381837897841.png?v=1761752003"},{"product_id":"nuflo-liquid-npt-meter-line-size-7-8-inch-end-connection-size-1-inch-flow-rate-3-30-us-gpm","title":"Nuflo Liquid NPT meter, Line Size :7\/8 inch ,End Connection Size :1 inch,Flow Rate :3-30 US GPM","description":"\u003cp\u003eCameron trademarked Nuflo GT Gas flowmeters and Nuflo LT Liquid flowmeters are used widely as a replacement of traditional meters which assists with the correct and specific measurement in oil and gas industry. Both brands are designed and developed with an aim to measure liquid and gas flow without any errors. Moreover, easily replaceable cartridges in both systems provide low-cost maintenance. Our company provides both Nuflo GT and Nuflo LT flowmeters word wide with fast shipping option. Feel free to contact us via the form below and we will get back to you as soon as possible.\u003c\/p\u003e\n","brand":"Nuflo","offers":[{"title":"Default Title","offer_id":42170173259889,"sku":"TFM\/NPT\/7\/8 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/nuflo-turbine-flow-meters-default-title-nuflo-liquid-npt-meter-line-size-7-8-inch-end-connection-size-1-inch-flow-rate-3-30-us-gpm-25381838323825.png?v=1761752003"},{"product_id":"nuflo-liquid-npt-meter-line-size-1-inch-end-connection-size-1-inch-flow-rate-5-50-us-gpm","title":"Nuflo Liquid NPT meter, Line Size :1 inch,End Connection Size :1 inch,Flow Rate :5-50 US GPM","description":"\u003cp\u003eCameron trademarked Nuflo GT Gas flowmeters and Nuflo LT Liquid flowmeters are used widely as a replacement of traditional meters which assists with the correct and specific measurement in oil and gas industry. Both brands are designed and developed with an aim to measure liquid and gas flow without any errors. Moreover, easily replaceable cartridges in both systems provide low-cost maintenance. Our company provides both Nuflo GT and Nuflo LT flowmeters word wide with fast shipping option. Feel free to contact us via the form below and we will get back to you as soon as possible.\u003c\/p\u003e\n","brand":"Nuflo","offers":[{"title":"Default Title","offer_id":42170173292657,"sku":"TFM\/NPT\/1 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/nuflo-turbine-flow-meters-default-title-nuflo-liquid-npt-meter-line-size-1-inch-end-connection-size-1-inch-flow-rate-5-50-us-gpm-25381838422129.png?v=1761752003"},{"product_id":"nuflo-liquid-npt-meter-line-size-1-1-2-inch-end-connection-size-1-1-2-inch-flow-rate-15-180-us-gpm","title":"Nuflo Liquid NPT meter, Line Size :1-1\/2 inch,End Connection Size :1-1\/2 inch ,Flow Rate :15-180 US GPM","description":"\u003cp\u003eCameron trademarked Nuflo GT Gas flowmeters and Nuflo LT Liquid flowmeters are used widely as a replacement of traditional meters which assists with the correct and specific measurement in oil and gas industry. Both brands are designed and developed with an aim to measure liquid and gas flow without any errors. Moreover, easily replaceable cartridges in both systems provide low-cost maintenance. Our company provides both Nuflo GT and Nuflo LT flowmeters word wide with fast shipping option. Feel free to contact us via the form below and we will get back to you as soon as possible.\u003c\/p\u003e\n","brand":"Nuflo","offers":[{"title":"Default Title","offer_id":42170173358193,"sku":"TFM\/NPT\/1-1\/2 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/nuflo-turbine-flow-meters-default-title-nuflo-liquid-npt-meter-line-size-1-1-2-inch-end-connection-size-1-1-2-inch-flow-rate-15-180-us-gpm-25381838553201.png?v=1761752002"},{"product_id":"nuflo-liquid-npt-meter-line-size-2-inch-end-connection-size-2-inch-flow-rate-40-400-us-gpm","title":"Nuflo Liquid NPT meter, Line Size :2 inch,End Connection Size :2 inch,Flow Rate :40-400 US GPM","description":"\u003cp\u003eCameron trademarked Nuflo GT Gas flowmeters and Nuflo LT Liquid flowmeters are used widely as a replacement of traditional meters which assists with the correct and specific measurement in oil and gas industry. Both brands are designed and developed with an aim to measure liquid and gas flow without any errors. Moreover, easily replaceable cartridges in both systems provide low-cost maintenance. Our company provides both Nuflo GT and Nuflo LT flowmeters word wide with fast shipping option. Feel free to contact us via the form below and we will get back to you as soon as possible.\u003c\/p\u003e\n","brand":"Nuflo","offers":[{"title":"Default Title","offer_id":42170173423729,"sku":"TFM\/NPT\/2 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/nuflo-turbine-flow-meters-default-title-nuflo-liquid-npt-meter-line-size-2-inch-end-connection-size-2-inch-flow-rate-40-400-us-gpm-25381838749809.png?v=1761752003"},{"product_id":"nuflo-liquid-npt-meter-line-size-3-inch-end-connection-size-3-inch-flow-rate-80-800-us-gpm","title":"Nuflo Liquid NPT meter, Line Size :3 inch,End Connection Size :3 inch,Flow Rate :80-800 US GPM","description":"\u003cp\u003eCameron trademarked Nuflo GT Gas flowmeters and Nuflo LT Liquid flowmeters are used widely as a replacement of traditional meters which assists with the correct and specific measurement in oil and gas industry. Both brands are designed and developed with an aim to measure liquid and gas flow without any errors. Moreover, easily replaceable cartridges in both systems provide low-cost maintenance. Our company provides both Nuflo GT and Nuflo LT flowmeters word wide with fast shipping option. Feel free to contact us via the form below and we will get back to you as soon as possible.\u003c\/p\u003e\n","brand":"Nuflo","offers":[{"title":"Default Title","offer_id":42170173456497,"sku":"TFM\/NPT\/3 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/nuflo-turbine-flow-meters-default-title-nuflo-liquid-npt-meter-line-size-3-inch-end-connection-size-3-inch-flow-rate-80-800-us-gpm-25381839274097.png?v=1761751999"},{"product_id":"nuflo-liquid-npt-meter-line-size-4-inch-end-connection-size-4-inch-flow-rate-100-1200-us-gpm","title":"Nuflo Liquid NPT meter, Line Size :4 inch,End Connection Size :4 inch,Flow Rate :100-1200 US GPM","description":"\u003cp\u003eCameron trademarked Nuflo GT Gas flowmeters and Nuflo LT Liquid flowmeters are used widely as a replacement of traditional meters which assists with the correct and specific measurement in oil and gas industry. Both brands are designed and developed with an aim to measure liquid and gas flow without any errors. Moreover, easily replaceable cartridges in both systems provide low-cost maintenance. Our company provides both Nuflo GT and Nuflo LT flowmeters word wide with fast shipping option. Feel free to contact us via the form below and we will get back to you as soon as possible.\u003c\/p\u003e\n","brand":"Nuflo","offers":[{"title":"Default Title","offer_id":42170173489265,"sku":"TFM\/NPT\/4 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/nuflo-turbine-flow-meters-default-title-nuflo-liquid-npt-meter-line-size-4-inch-end-connection-size-4-inch-flow-rate-100-1200-us-gpm-25381839339633.png?v=1761751999"},{"product_id":"nuflo-liquid-flanged-end-rf-meter-line-size-3-8-inch-end-connection-size-1-2-inch-flow-rate-0-3-3-us-gpm","title":"Nuflo Liquid Flanged end RF meter, Line Size :3\/8 inch,End Connection Size :1\/2 inch,Flow Rate :0.3-3 US GPM","description":"\u003cp\u003eCameron trademarked Nuflo GT Gas flowmeters and Nuflo LT Liquid flowmeters are used widely as a replacement of traditional meters which assists with the correct and specific measurement in oil and gas industry. Both brands are designed and developed with an aim to measure liquid and gas flow without any errors. Moreover, easily replaceable cartridges in both systems provide low-cost maintenance. Our company provides both Nuflo GT and Nuflo LT flowmeters word wide with fast shipping option. Feel free to contact us via the form below and we will get back to you as soon as possible.\u003c\/p\u003e\n","brand":"Nuflo","offers":[{"title":"Default Title","offer_id":42170173554801,"sku":"TFM\/FLANGED END\/3\/8 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/nuflo-turbine-flow-meters-default-title-nuflo-liquid-flanged-end-rf-meter-line-size-3-8-inch-end-connection-size-1-2-inch-flow-rate-0-3-3-us-gpm-25381839405169.png?v=1761751997"},{"product_id":"nuflo-liquid-flanged-end-rf-meter-line-size-1-2-inch-end-connection-size-1-2-inch-flow-rate-0-75-7-5-us-gpm","title":"Nuflo Liquid Flanged end RF meter, Line Size :1\/2 inch,End Connection Size :1\/2 inch,Flow Rate :0.75-7.5 US GPM","description":"\u003cp\u003eCameron trademarked Nuflo GT Gas flowmeters and Nuflo LT Liquid flowmeters are used widely as a replacement of traditional meters which assists with the correct and specific measurement in oil and gas industry. Both brands are designed and developed with an aim to measure liquid and gas flow without any errors. Moreover, easily replaceable cartridges in both systems provide low-cost maintenance. Our company provides both Nuflo GT and Nuflo LT flowmeters word wide with fast shipping option. Feel free to contact us via the form below and we will get back to you as soon as possible.\u003c\/p\u003e\n","brand":"Nuflo","offers":[{"title":"Default Title","offer_id":42170173587569,"sku":"TFM\/FLANGED END\/1\/2 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/nuflo-turbine-flow-meters-default-title-nuflo-liquid-flanged-end-rf-meter-line-size-1-2-inch-end-connection-size-1-2-inch-flow-rate-0-75-7-5-us-gpm-25381839470705.png?v=1761751998"},{"product_id":"nuflo-liquid-flanged-end-rf-meter-line-size-3-4-inch-end-connection-size-3-4-inch-flow-rate-2-15-us-gpm","title":"Nuflo Liquid Flanged end RF meter, Line Size :3\/4 inch,End Connection Size :3\/4 inch,Flow Rate :2-15 US GPM","description":"\u003cp\u003eCameron trademarked Nuflo GT Gas flowmeters and Nuflo LT Liquid flowmeters are used widely as a replacement of traditional meters which assists with the correct and specific measurement in oil and gas industry. Both brands are designed and developed with an aim to measure liquid and gas flow without any errors. Moreover, easily replaceable cartridges in both systems provide low-cost maintenance. Our company provides both Nuflo GT and Nuflo LT flowmeters word wide with fast shipping option. Feel free to contact us via the form below and we will get back to you as soon as possible.\u003c\/p\u003e\n","brand":"Nuflo","offers":[{"title":"Default Title","offer_id":42170173620337,"sku":"TFM\/FLANGED END\/3\/4 inch","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/nuflo-turbine-flow-meters-default-title-nuflo-liquid-flanged-end-rf-meter-line-size-3-4-inch-end-connection-size-3-4-inch-flow-rate-2-15-us-gpm-25381839536241.png?v=1761751997"}],"url":"https:\/\/www.generaltechkuwait.com\/collections\/measurement-flowmeters.oembed","provider":"General Tech Services LLC","version":"1.0","type":"link"}