{"title":"Micrometers","description":"\u003cp\u003eMicrometers are grouped here into outside micrometers and sets, inside micrometers, special-purpose micrometers, micrometer heads, thread and gear micrometers, and depth micrometers. Mechanical and digital versions are both listed, along with a micrometer checker.\u003c\/p\u003e\u003cp\u003eThey are used in machine shops, toolrooms and quality labs wherever small dimensions must be confirmed. Choose by measuring range, resolution, anvil style, and whether a digital display or a mechanical thimble suits the operator and the shop floor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eChecking shaft diameters after turning\u003c\/li\u003e\n\u003cli\u003eVerifying bore size on machined parts\u003c\/li\u003e\n\u003cli\u003eInspecting thread and gear features in toolrooms\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBrowse by type: \u003ca href=\"\/collections\/measurement-outside-micrometers\"\u003eOutside Micrometers\u003c\/a\u003e, \u003ca href=\"\/collections\/measurement-inside-micrometers\"\u003eInside Micrometers\u003c\/a\u003e, \u003ca href=\"\/collections\/measurement-special-purpose-micrometers\"\u003eSpecial-Purpose Micrometers\u003c\/a\u003e, \u003ca href=\"\/collections\/measurement-micrometer-heads\"\u003eMicrometer Heads\u003c\/a\u003e, \u003ca href=\"\/collections\/measurement-thread-and-gear-micrometers\"\u003eThread \u0026amp; Gear Micrometers\u003c\/a\u003e, \u003ca href=\"\/collections\/measurement-depth-micrometers\"\u003eDepth Micrometers\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"mitutoyo-293-185-digimatic-quantumike-micrometer-0-25mm-0-1-inch","title":"Mitutoyo 293-185 | Digimatic QuantuMike Micrometer | 0-1 in (0-25 mm), no output","description":"\u003cp\u003e\u003cstrong\u003ePart No. 3047SB | Range 10 mm | Graduation 0.01 mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduct Overview\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 3047SB is a Series 3 dial gauge with a flat back design, 0.01 mm graduation and a 10 mm measuring range. It is designed for long-travel comparative measurement of heights, steps, runout and machine alignment.\u003c\/p\u003e\n\u003cp\u003eWith 0.01 mm graduation over 10 mm of travel, the gauge provides practical resolution for longer inspection movements, allowing users to measure features in a single setup without frequent repositioning. Its Series 3 configuration is suited to routine workshop and inspection applications.\u003c\/p\u003e\n\u003cp\u003eThe flat back provides a clean, low-profile rear design for stem-mounted applications using a compatible magnetic base, comparator stand or custom fixture. Its mechanical movement is suited to dependable day-to-day measurement on the shop floor.\u003c\/p\u003e\n\u003cp\u003eKey Benefits\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e0.01 mm graduation for clear, practical readings\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e10 mm measuring range for long-travel comparative inspection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSeries 3 configuration for longer-travel measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFlat back design for stem mounting in suitable stands, bases and fixtures\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMechanical movement for routine workshop measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGenuine Mitutoyo part supplied by General Tech Services LLC in Kuwait\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWho This Product Is Best For\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eInspectors measuring heights, steps, runout and machine alignment\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eToolrooms and machine shops setting up workpieces, fixtures and machinery\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMaintenance teams replacing an existing flat back dial gauge\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCalibration and quality-control teams standardising inspection equipment on Mitutoyo\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHow to Use It\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eMount the gauge securely by its stem in a rigid stand, magnetic base or suitable fixture, with the plunger correctly aligned to the measuring surface.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePre-load the plunger slightly against the reference surface or master and rotate the bezel to establish the required zero position.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMove the workpiece or gauge across the feature being inspected and read the deviation directly from the dial.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eKeep the plunger movement within the 10 mm measuring range and avoid excessive measuring force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRetract the plunger gently after use and store the gauge clean, dry and protected.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the Mitutoyo 3047SB dial gauge used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 3047SB is designed for long-travel comparative measurement of heights, steps, runout and machine alignment. Its 0.01 mm graduation and 10 mm measuring range suit these inspection tasks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the graduation and range of the 3047SB?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 3047SB has a 0.01 mm graduation and a 10 mm measuring range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat series is the Mitutoyo 3047SB?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 3047SB is listed as a Mitutoyo Series 3 dial gauge. For compatibility with existing holders, stands and fixtures, contact General Tech Services LLC at \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the benefit of a flat back?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe flat back provides a clean, compact rear profile for applications where the gauge is mounted by its stem in a suitable stand, magnetic base or fixture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the flat back 3047SB and the lug back 3047A?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth models are listed with a 0.01 mm graduation and a 10 mm measuring range. The 3047SB has a flat back, while the 3047A is the lug back version. Select the configuration that matches your mounting arrangement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the genuine Mitutoyo 3047SB available in Kuwait?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eContact General Tech Services LLC at \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e for current pricing, lead time and availability in Kuwait.\u003c\/p\u003e\n\u003cp\u003eRequest Pricing \u0026amp; Availability\u003c\/p\u003e\n\u003cp\u003eFor the genuine Mitutoyo 3047SB in Kuwait, contact General Tech Services LLC at \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e to request pricing and current availability.\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42165606514801,"sku":"293-185","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-digimatic-micrometers-quantumike-ip65-default-title-mitutoyo-293-185-digimatic-quantumike-micrometer-0-25mm-0-1-inch-25390664155249.jpg?v=1761753662"},{"product_id":"mitutoyo-103-137-outside-micrometer-0-25mm-graduation-0-01-mm","title":"Mitutoyo 103-137 | Outside Micrometer | 0-25 mm, 0.01 mm","description":"\u003cp\u003eMitutoyo 103-137 is a basic, cost-effective mechanical outside micrometer for 0-25 mm, graduated in 0.01 mm with ±2 µm accuracy. The 0-25 mm, 0.01 mm version has a baked-enamel finished frame and carbide measuring faces, with a ratchet stop for constant measuring force.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 0-25 mm, graduation 0.01 mm\u003c\/li\u003e\n\u003cli\u003eAccuracy ±2 µm on the 0-25 mm, 0.01 mm model\u003c\/li\u003e\n\u003cli\u003eCarbide measuring faces, baked-enamel frame (103-137)\u003c\/li\u003e\n\u003cli\u003eRatchet stop for constant force (0-25 mm, 0.01 mm)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42165606580337,"sku":"103-137","price":199.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-mechanical-outside-micrometer-default-title-mitutoyo-103-137-outside-micrometer-0-25mm-graduation-0-01-mm-25390664188017.jpg?v=1761753665"},{"product_id":"mitutoyo-digimatic-micrometer-head-25mm-1","title":"Mitutoyo 350-351-30 | Digimatic Micrometer Head | 25 mm \/ 1 in, plain stem, ratchet stop","description":"\u003cp\u003eThis Mitutoyo 350-351-30 digital micrometer head covers 25 mm or 1 in and reads 0.001 mm or 0.00005 in, using a plain stem and a flat spindle tip.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAccuracy ±2 µm \/ ±0.0001 in\u003c\/li\u003e\n\u003cli\u003eFlat spindle end with carbide tip\u003c\/li\u003e\n\u003cli\u003eRatchet stop\u003c\/li\u003e\n\u003cli\u003eDigimatic data output\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42165606613105,"sku":"350-351-30","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-digital-micrometer-heads-default-title-mitutoyo-digimatic-micrometer-head-25mm-1-25387038310513.jpg?v=1761753662"},{"product_id":"mitutoyo-141-121-interchangeable-rod-inside-micrometer-8-20-graduation-001","title":"Mitutoyo 141-121 | Interchangeable Rod Inside Micrometer | 8-20 in, .001 in","description":"\u003cp\u003eThe Mitutoyo 141-121 is an interchangeable rod inside micrometer covering 8-20 in with 3 rods and a .001 in graduation. Each rod is marked with its range, and spacing collars combine with the rods to reach the full 8-20 in span of the 141-121. On the 141-121, a screw-in handle extension lets the head reach deep into a hole, and the sleeve can be rotated to adjust the index line when setting.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3 interchangeable rods for 8-20 in\u003c\/li\u003e\n\u003cli\u003eStroke 1 in, graduation .001 in (141-121)\u003c\/li\u003e\n\u003cli\u003eSpacing collars used with the rods on the 8-20 in model\u003c\/li\u003e\n\u003cli\u003eNeeds an optional setting ring or Inside Micro Checker for setting (141-121)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42165606678641,"sku":"141-121","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-mechanical-inside-micrometers-default-title-mitutoyo-141-121-interchangeable-rod-inside-micrometer-8-20-graduation-001-25387038736497.jpg?v=1761753663"},{"product_id":"mitutoyo-468-976-digital-3-point-internal-micrometer-set-0-275-0-5-interchange-head-ip65-tin","title":"Mitutoyo 468-976 | Digital Holtest 3-Point Bore Micrometer Set | 0.275–0.5 in (6.985–12.7 mm), IP65","description":"\u003cp\u003eThe Mitutoyo 468-976 is a complete Holtest three-point bore micrometer set for 0.275–0.5 in (6.985–12.7 mm), using interchangeable heads on one digital unit. Its IP65 rating allows use where coolant splashes during machining.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSetting rings supplied: ø0.35 in, ø0.425 in\u003c\/li\u003e\n\u003cli\u003eTitanium-coated measuring pins for durability and impact resistance\u003c\/li\u003e\n\u003cli\u003eDigital step 0.001 mm \/ 0.00005 in; main unit 420 g\u003c\/li\u003e\n\u003cli\u003eLarge LCD, 7.5 mm characters, with ZERO\/ABS and data output\u003c\/li\u003e\n\u003cli\u003eBattery life about 1.2 years; inspection certificate included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42165620965489,"sku":"468-976","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-digimatic-holtest-complete-unit-sets-default-title-mitutoyo-468-976-digital-3-point-internal-micrometer-set-0-275-0-5-interchange-head-ip65-tin-25387104895089.png?v=1761753318"},{"product_id":"mitutoyo-468-977-digital-3-point-internal-micrometer-set-0-5-0-8-interchange-head-ip65-tin","title":"Mitutoyo 468-977 | Digital Holtest 3-Point Bore Micrometer Set | 0.5–0.8 in (12.7–20.32 mm), IP65","description":"\u003cp\u003eMitutoyo 468-977 brings together interchangeable three-point heads for bores from 0.5–0.8 in (12.7–20.32 mm), with setting rings and an extension rod. IP65 sealing makes it practical at the machine, even with coolant spray.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSetting rings supplied: ø0.65 in\u003c\/li\u003e\n\u003cli\u003eMeasuring pins carry a titanium coating for wear and impact resistance\u003c\/li\u003e\n\u003cli\u003eDigital step 0.001 mm \/ 0.00005 in; main unit 560 g\u003c\/li\u003e\n\u003cli\u003eZERO\/ABS, data output and an LCD with 7.5 mm digits\u003c\/li\u003e\n\u003cli\u003eIncludes key, battery, extension rod and inspection certificate\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42165620998257,"sku":"468-977","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-digimatic-holtest-complete-unit-sets-default-title-mitutoyo-468-977-digital-3-point-internal-micrometer-set-0-5-0-8-interchange-head-ip65-tin-25387104993393.png?v=1761753317"},{"product_id":"mitutoyo-468-978-digital-3-point-internal-micrometer-set-0-8-2-interchange-head-ip65-tin","title":"Mitutoyo 468-978 | Digital Holtest 3-Point Bore Micrometer Set | 0.8–2 in (20.32–50.8 mm), IP65","description":"\u003cp\u003eCovering bores of 0.8–2 in (20.32–50. Water and dust protection to IP65 suits it to coolant-wet machining areas.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSetting rings supplied: ø1 in, ø1.6 in\u003c\/li\u003e\n\u003cli\u003eTitanium-coated pins resist wear and knocks\u003c\/li\u003e\n\u003cli\u003eDigital step 0.001 mm \/ 0.00005 in; main unit 1170 g\u003c\/li\u003e\n\u003cli\u003eData output plus ZERO\/ABS; 7.5 mm high LCD figures\u003c\/li\u003e\n\u003cli\u003eSupplied in a box with key, one battery and extension rod\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42165621031025,"sku":"468-978","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-digimatic-holtest-complete-unit-sets-default-title-mitutoyo-468-978-digital-3-point-internal-micrometer-set-0-8-2-interchange-head-ip65-tin-25387105484913.png?v=1761753317"},{"product_id":"mitutoyo-468-979-digital-3-point-internal-micrometer-set-2-4-interchange-head-ip65-tin","title":"Mitutoyo 468-979 | Digital Holtest 3-Point Bore Micrometer Set | 2–4 in (50.8–101.6 mm), IP65","description":"\u003cp\u003eThis Mitutoyo 468-979 kit measures internal diameters across 2–4 in (50.8–101.6 mm) with interchangeable three-point heads. Being IP65 protected, it copes with splashing coolant on the shop floor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSetting rings supplied: ø2.5 in, ø3.5 in\u003c\/li\u003e\n\u003cli\u003eDurable, impact-resistant titanium-coated contact pins\u003c\/li\u003e\n\u003cli\u003eDigital step 0.001 mm \/ 0.00005 in; main unit 2420 g\u003c\/li\u003e\n\u003cli\u003eEasy-to-read 7.5 mm LCD; data output and ZERO\/ABS functions\u003c\/li\u003e\n\u003cli\u003eApprox. 1.2 years per battery; boxed with key and extension rod\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42165621063793,"sku":"468-979","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-digimatic-holtest-complete-unit-sets-default-title-mitutoyo-468-979-digital-3-point-internal-micrometer-set-2-4-interchange-head-ip65-tin-25387106107505.png?v=1761753315"},{"product_id":"mitutoyo-468-980-digital-3-point-internal-micrometer-set-4-8-interchange-head-ip65-tin","title":"Mitutoyo 468-980 | Digital Holtest 3-Point Bore Micrometer Set | 4–8 in (101.6–203.2 mm), IP65","description":"\u003cp\u003eThe Mitutoyo 468-980 is the largest set in this group, spanning 4–8 in (101.6–203.2 mm) with interchangeable three-point heads. It is rated IP65 against water and dust for use around coolant.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSetting rings supplied: ø5 in, ø7 in\u003c\/li\u003e\n\u003cli\u003ePins are titanium coated to stand up to impacts and wear\u003c\/li\u003e\n\u003cli\u003eDigital step 0.001 mm \/ 0.0001 in; main unit 3540 g\u003c\/li\u003e\n\u003cli\u003eLCD character height 7.5 mm; ZERO\/ABS and data output available\u003c\/li\u003e\n\u003cli\u003eBoxed with extension rod, key, battery and inspection certificate\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42165621096561,"sku":"468-980","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-digimatic-holtest-complete-unit-sets-default-title-mitutoyo-468-980-digital-3-point-internal-micrometer-set-4-8-interchange-head-ip65-tin-25387106205809.png?v=1761753314"},{"product_id":"mitutoyo-103-914-50-outside-micrometer-set-ratchet-stop-0-300mm-range-0-01mm-graduation-12-piece-set","title":"Mitutoyo 103-914-50 | Outside Micrometer Set | 0-300 mm, 0.01 mm, 12 pieces","description":"\u003cp\u003eThe Mitutoyo 103-914-50 is a 12-piece outside micrometer set covering 0-300 mm in 25 mm steps, each micrometer graduated in 0.01 mm. It contains the micrometers of sets 103-913-50 and 103-915-10 (0-25 mm up to 275-300 mm) plus 11 setting standards, all with ratchet stops for constant measuring force and repeatable readings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e12 micrometers covering 0-300 mm, 0.01 mm graduation\u003c\/li\u003e\n\u003cli\u003eAccuracy ±2 µm up to 75 mm, ±3 µm to 150 mm, ±4 µm to 225 mm, ±5 µm to 300 mm\u003c\/li\u003e\n\u003cli\u003eCarbide-tipped faces: flatness 0.6 µm, parallelism (2+R\/100) µm\u003c\/li\u003e\n\u003cli\u003eø6.35 mm spindle with spindle lock, 0.5 mm pitch on set 103-914-50\u003c\/li\u003e\n\u003cli\u003eBaked-enamel frames; 103-914-50 set weight 9300 g\u003c\/li\u003e\n\u003cli\u003e103-914-50 is delivered in a box with 11 setting standards and a key\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170129711217,"sku":"103-914-50","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-mechanical-outside-micrometer-sets-default-title-mitutoyo-103-914-50-outside-micrometer-set-ratchet-stop-0-300mm-range-0-01mm-graduation-12-piece-set-25381751259249.jpg?v=1761752343"},{"product_id":"mitutoyo-103-927-10-outside-micrometer-set-ratchet-stop-0-75mm-range-0-01mm-graduation-3-piece-set","title":"Mitutoyo 103-927-10 | Outside Micrometer Set | 0-75 mm, 0.01 mm, 3 pieces","description":"\u003cp\u003eMitutoyo set 103-927-10 groups 3 mechanical outside micrometers for 0-75 mm, each reading to 0.01 mm. The kit holds 103-137, 103-138 and 103-139-10 (0-25, 25-50 and 50-75 mm) together with 2 setting standards, and every micrometer uses a ratchet stop for consistent readings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3 micrometers covering 0-75 mm, 0.01 mm graduation\u003c\/li\u003e\n\u003cli\u003eCarbide-tipped, micro-lapped measuring faces on all 3 micrometers of the 103-927-10\u003c\/li\u003e\n\u003cli\u003eø6.35 mm spindle with spindle lock, 0.5 mm pitch on set 103-927-10\u003c\/li\u003e\n\u003cli\u003eBaked-enamel frames; 103-927-10 set weight 750 g\u003c\/li\u003e\n\u003cli\u003e103-927-10 is delivered in a box with 2 setting standards and a key\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170129776753,"sku":"103-927-10","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-mechanical-outside-micrometer-sets-default-title-mitutoyo-103-927-10-outside-micrometer-set-ratchet-stop-0-75mm-range-0-01mm-graduation-3-piece-set-25381751783537.png?v=1761752347"},{"product_id":"mitutoyo-103-913-50-outside-micrometer-set-ratchet-stop-0-150mm-range-0-01mm-graduation-6-piece-set","title":"Mitutoyo 103-913-50 | Outside Micrometer Set | 0-150 mm, 0.01 mm, 6 pieces","description":"\u003cp\u003eCovering 0-150 mm with 6 outside micrometers, the Mitutoyo 103-913-50 set reads to 0.01 mm on each instrument. You get 103-137, 103-138 and 103-139-10 to 103-142-10 (0-25 mm up to 125-150 mm) and 5 setting standards, with ratchet stops fitted throughout for constant measuring force.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e6 micrometers covering 0-150 mm, 0.01 mm graduation\u003c\/li\u003e\n\u003cli\u003eCarbide-tipped, micro-lapped measuring faces on all 6 micrometers of the 103-913-50\u003c\/li\u003e\n\u003cli\u003eø6.35 mm spindle with spindle lock, 0.5 mm pitch on set 103-913-50\u003c\/li\u003e\n\u003cli\u003eBaked-enamel frames; 103-913-50 set weight 2260 g\u003c\/li\u003e\n\u003cli\u003e103-913-50 is delivered in a box with 5 setting standards and a key\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170129809521,"sku":"103-913-50","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-mechanical-outside-micrometer-sets-default-title-mitutoyo-103-913-50-outside-micrometer-set-ratchet-stop-0-150mm-range-0-01mm-graduation-6-piece-set-25381752209521.png?v=1761752343"},{"product_id":"mitutoyo-103-915-10-outside-micrometer-set-ratchet-stop-150-300mm-range-0-01mm-graduation-6-piece-set","title":"Mitutoyo 103-915-10 | Outside Micrometer Set | 150-300 mm, 0.01 mm, 6 pieces","description":"\u003cp\u003eWith 6 outside micrometers spanning 150-300 mm, set 103-915-10 gives a 0.01 mm graduation across every 25 mm band. Included are 103-143-10 to 103-148-10 (150-175 mm up to 275-300 mm) and 6 setting standards, while a ratchet stop on each of the 6 micrometers keeps the measuring force constant.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e6 micrometers covering 150-300 mm, 0.01 mm graduation\u003c\/li\u003e\n\u003cli\u003eCarbide-tipped, micro-lapped measuring faces on all 6 micrometers of the 103-915-10\u003c\/li\u003e\n\u003cli\u003eø6.35 mm spindle with spindle lock, 0.5 mm pitch on set 103-915-10\u003c\/li\u003e\n\u003cli\u003eBaked-enamel frames; 103-915-10 set weight 7695 g\u003c\/li\u003e\n\u003cli\u003e103-915-10 is delivered in a box with 6 setting standards and a key\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170129907825,"sku":"103-915-10","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-mechanical-outside-micrometer-sets-default-title-mitutoyo-103-915-10-outside-micrometer-set-ratchet-stop-150-300mm-range-0-01mm-graduation-6-piece-set-25381752602737.png?v=1761752343"},{"product_id":"mitutoyo-103-929-outside-micrometer-set-ratchet-stop-0-3-range-0-001-graduation-3-piece-set","title":"Mitutoyo 103-929 | Outside Micrometer Set | 0-3 in, 0.001 in, 3 pieces","description":"\u003cp\u003eCovering 0-3 in with 3 outside micrometers, the Mitutoyo 103-929 set reads to 0.001 in on each instrument. You get 103-177, 103-178 and 103-179 (0-1, 1-2 and 2-3 in) and 2 setting standards, with ratchet stops fitted throughout for constant measuring force.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3 micrometers covering 0-3 in, 0.001 in graduation\u003c\/li\u003e\n\u003cli\u003eCarbide-tipped, micro-lapped measuring faces on all 3 micrometers of the 103-929\u003c\/li\u003e\n\u003cli\u003eø6.35 mm spindle with spindle lock on set 103-929\u003c\/li\u003e\n\u003cli\u003eBaked-enamel frames; 103-929 set weight 750 g\u003c\/li\u003e\n\u003cli\u003e103-929 is delivered in a box with 2 setting standards and a key\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170130006129,"sku":"103-929","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-mechanical-outside-micrometer-sets-default-title-mitutoyo-103-929-outside-micrometer-set-ratchet-stop-0-3-range-0-001-graduation-3-piece-set-25381752897649.png?v=1761752342"},{"product_id":"mitutoyo-103-904-10-outside-micrometer-set-ratchet-stop-0-6-inch-range-0-001-graduation-6-piece-set","title":"Mitutoyo 103-904-10 | Outside Micrometer Set | 0-6 in, 0.001 in, 6 pieces","description":"\u003cp\u003eThe Mitutoyo 103-904-10 is a 6-piece outside micrometer set covering 0-6 in in 1 in steps, each micrometer graduated in 0.001 in. It contains 103-177 to 103-182 (0-1 in up to 5-6 in) plus 5 setting standards, all with ratchet stops for constant measuring force and repeatable readings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e6 micrometers covering 0-6 in, 0.001 in graduation\u003c\/li\u003e\n\u003cli\u003eCarbide-tipped, micro-lapped measuring faces on all 6 micrometers of the 103-904-10\u003c\/li\u003e\n\u003cli\u003eø6.35 mm spindle with spindle lock on set 103-904-10\u003c\/li\u003e\n\u003cli\u003eBaked-enamel frames; 103-904-10 set weight 2200 g\u003c\/li\u003e\n\u003cli\u003e103-904-10 is delivered in a box with 5 setting standards and a key\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170130038897,"sku":"103-904-10","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-mechanical-outside-micrometer-sets-default-title-mitutoyo-103-904-10-outside-micrometer-set-ratchet-stop-0-6-inch-range-0-001-graduation-6-piece-set-25381752930417.png?v=1761752341"},{"product_id":"mitutoyo-103-906-outside-micrometer-set-ratchet-stop-6-12-range-0-001-graduation-6-piece-set","title":"Mitutoyo 103-906 | Outside Micrometer Set | 6-12 in, 0.001 in, 6 pieces","description":"\u003cp\u003eMitutoyo set 103-906 groups 6 mechanical outside micrometers for 6-12 in, each reading to 0.001 in. The kit holds 103-183 to 103-188 (6-7 in up to 11-12 in) together with 6 setting standards, and every micrometer uses a ratchet stop for consistent readings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e6 micrometers covering 6-12 in, 0.001 in graduation\u003c\/li\u003e\n\u003cli\u003eCarbide-tipped, micro-lapped measuring faces on all 6 micrometers of the 103-906\u003c\/li\u003e\n\u003cli\u003eø6.35 mm spindle with spindle lock on set 103-906\u003c\/li\u003e\n\u003cli\u003eBaked-enamel frames; 103-906 set weight 7695 g\u003c\/li\u003e\n\u003cli\u003e103-906 is delivered in a box with 6 setting standards and a key\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170130104433,"sku":"103-906","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-mechanical-outside-micrometer-sets-default-title-mitutoyo-103-906-outside-micrometer-set-ratchet-stop-6-12-range-0-001-graduation-6-piece-set-25381752995953.png?v=1761752340"},{"product_id":"mitutoyo-103-905-10-outside-micrometer-set-ratchet-stop-0-12-range-0-001-graduation-12-piece-set","title":"Mitutoyo 103-905-10 | Outside Micrometer Set | 0-12 in, 0.001 in, 12 pieces","description":"\u003cp\u003eWith 12 outside micrometers spanning 0-12 in, set 103-905-10 gives a 0.001 in graduation across every 1 in band. Included are the micrometers of sets 103-904-10 and 103-906 (0-1 in up to 11-12 in) and 11 setting standards, while a ratchet stop on each of the 12 micrometers keeps the measuring force constant.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e12 micrometers covering 0-12 in, 0.001 in graduation\u003c\/li\u003e\n\u003cli\u003eCarbide-tipped, micro-lapped measuring faces on all 12 micrometers of the 103-905-10\u003c\/li\u003e\n\u003cli\u003eø6.35 mm spindle with spindle lock on set 103-905-10\u003c\/li\u003e\n\u003cli\u003eBaked-enamel frames; 103-905-10 set weight 9000 g\u003c\/li\u003e\n\u003cli\u003e103-905-10 is delivered in a box with 11 setting standards and a key\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170130169969,"sku":"103-905-10","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-mechanical-outside-micrometer-sets-default-title-mitutoyo-103-905-10-outside-micrometer-set-ratchet-stop-0-12-range-0-001-graduation-12-piece-set-25381753028721.png?v=1761752339"},{"product_id":"gagemaker-cl-1001-camlock-micrometer-range-0-1-0-25-4-mm","title":"Gagemaker CL-1001 | CamLock Micrometer | Range 0 - 1\" (0 - 25.4 mm)","description":"\u003cp\u003eCovering 0 - 1\" (0 - 25.4 mm), the Gagemaker CL-1001 CamLock micrometer measures API weld flange thickness. A verification standard is supplied with it, and replacement standards are sold separately. Choose the CL-1001 when the flange thickness to be measured falls within 0 - 1\".\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange: 0 - 1\" (0 - 25.4 mm)\u003c\/li\u003e\n\u003cli\u003eMeasures API weld flange thickness\u003c\/li\u003e\n\u003cli\u003eVerification standard included with each CL-1001\u003c\/li\u003e\n\u003cli\u003eReplacement standards available separately from Gagemaker\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170206486641,"sku":"Gagemaker CL-1001","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-camlock-micrometers-default-title-gagemaker-cl-1001-camlock-micrometer-range-0-1-0-25-4-mm-25381954060401.jpg?v=1761751596"},{"product_id":"gagemaker-cl-1002-camlock-micrometer-range-1-2-25-4-50-8-mm","title":"Gagemaker CL-1002 | CamLock Micrometer | Range 1\" - 2\" (25.4 - 50.8 mm)","description":"\u003cp\u003eThe Gagemaker CL-1002 is the 1\" - 2\" CamLock micrometer (25.4 - 50.8 mm) for measuring the thickness of API weld flanges. It ships with a verification standard; replacement standards are available as separate items.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMeasuring range 25.4 - 50.8 mm \/ 1\" - 2\"\u003c\/li\u003e\n\u003cli\u003eBuilt to check API weld flange thickness at 1\" - 2\"\u003c\/li\u003e\n\u003cli\u003eSupplied with a verification standard for the CL-1002\u003c\/li\u003e\n\u003cli\u003eSpare standards sold on their own\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170206519409,"sku":"Gagemaker CL-1002","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-camlock-micrometers-default-title-gagemaker-cl-1002-camlock-micrometer-range-1-2-25-4-50-8-mm-25381954125937.jpg?v=1761751596"},{"product_id":"gagemaker-cl-1003-camlock-micrometer-range-2-3-50-8-76-2-mm","title":"Gagemaker CL-1003 | CamLock Micrometer | Range 2\" - 3\" (50.8 - 76.2 mm)","description":"\u003cp\u003eFor API weld flange thickness in the 2\" - 3\" band, Gagemaker offers the CL-1003 CamLock micrometer, metric equivalent 50.8 - 76.2 mm. Each unit comes with its own verification standard, and replacement standards are offered separately should it need replacing.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCovers 2\" - 3\", or 50.8 - 76.2 mm\u003c\/li\u003e\n\u003cli\u003eAPI weld flange thickness measurement with the CL-1003\u003c\/li\u003e\n\u003cli\u003eVerification standard in the box\u003c\/li\u003e\n\u003cli\u003eReplacement standards for the CL-1003 can be bought separately\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170206552177,"sku":"Gagemaker CL-1003","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-camlock-micrometers-default-title-gagemaker-cl-1003-camlock-micrometer-range-2-3-50-8-76-2-mm-25381954289777.jpg?v=1761751596"},{"product_id":"gagemaker-cl-1004-camlock-micrometer-range-3-4-76-2-101-6-mm","title":"Gagemaker CL-1004 | CamLock Micrometer | Range 3\" - 4\" (76.2 - 101.6 mm)","description":"\u003cp\u003eThe CL-1004 is Gagemaker's CamLock micrometer for the 3\" - 4\" range (76.2 - 101.6 mm), used to measure API weld flange thickness. It is supplied together with a verification standard. If that standard ever needs replacing, replacement standards are available as separate items.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3\" - 4\" range (76.2 - 101.6 mm)\u003c\/li\u003e\n\u003cli\u003eFor API weld flange thickness\u003c\/li\u003e\n\u003cli\u003eComes with a verification standard sized for 3\" - 4\"\u003c\/li\u003e\n\u003cli\u003eFurther standards for the CL-1004 are offered separately\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170206584945,"sku":"Gagemaker CL-1004","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-camlock-micrometers-default-title-gagemaker-cl-1004-camlock-micrometer-range-3-4-76-2-101-6-mm-25381954355313.jpg?v=1761751595"},{"product_id":"gagemaker-mt-3012-50-mic-trac-12-base-unit-with-dro","title":"Gagemaker MT-3012-50 | MIC TRAC 12\" Base Unit with DRO | ±.0001\" Accuracy, 0\" – 12\" Internal","description":"\u003cp\u003eGagemaker MT-3012-50 is a 12\" MIC TRAC™ gage setting and part measurement system without Force-Lok, rated ±.0001\" accuracy at .00005\" resolution. It measures internally from 0\" – 12\" (0 mm – 304.8 mm) and externally from 1-1\/2\" – 13-1\/2\" (38.1 mm – 342.9 mm), and is supplied with a digital readout (DRO), a TF-PL setting block set and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMT-3012-50 internal range 0\" – 12\" (0 mm – 304.8 mm), external range 1-1\/2\" – 13-1\/2\" (38.1 mm – 342.9 mm)\u003c\/li\u003e\n\u003cli\u003e±.0001\" accuracy and .00005\" resolution (MT-3012-50)\u003c\/li\u003e\n\u003cli\u003eBase unit without Force-Lok, digital readout (DRO): MT-3012-50\u003c\/li\u003e\n\u003cli\u003eMT-3012-50 supplied with: DRO, TF-PL setting block set, shipping carton\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170206617713,"sku":"MT-3012-50","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-3012-50-mic-trac-12-base-unit-with-dro-25381954420849.jpg?v=1761751595"},{"product_id":"gagemaker-mt-3024-50-mic-trac-24-base-unit-with-dro","title":"Gagemaker MT-3024-50 | MIC TRAC 24\" Base Unit with DRO | ±.0002\" Accuracy, 0\" – 24\" Internal","description":"\u003cp\u003eGagemaker MT-3024-50 is a 24\" MIC TRAC™ gage setting and part measurement system without Force-Lok, rated ±.0002\" accuracy at .00005\" resolution. It measures internally from 0\" – 24\" (0 mm – 609.6 mm) and externally from 1-1\/2\" – 25-1\/2\" (38.1 mm – 647.7 mm), and is supplied with a digital readout (DRO), a TF-PL setting block set and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMT-3024-50 internal range 0\" – 24\" (0 mm – 609.6 mm), external range 1-1\/2\" – 25-1\/2\" (38.1 mm – 647.7 mm)\u003c\/li\u003e\n\u003cli\u003e±.0002\" accuracy and .00005\" resolution (MT-3024-50)\u003c\/li\u003e\n\u003cli\u003eBase unit without Force-Lok, digital readout (DRO): MT-3024-50\u003c\/li\u003e\n\u003cli\u003eMT-3024-50 supplied with: DRO, TF-PL setting block set, shipping carton\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170206683249,"sku":"MT-3024-50","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-3024-50-mic-trac-24-base-unit-with-dro-25381954584689.jpg?v=1761751594"},{"product_id":"gagemaker-mt-3036-50-mic-trac-36-base-unit-with-dro","title":"Gagemaker MT-3036-50 | MIC TRAC 36\" Base Unit with DRO | ±.0003\" Accuracy, 0\" – 36\" Internal","description":"\u003cp\u003eGagemaker MT-3036-50 is a 36\" MIC TRAC™ gage setting and part measurement system without Force-Lok, rated ±.0003\" accuracy at .00005\" resolution. It measures internally from 0\" – 36\" (0 mm – 914.4 mm) and externally from 1-1\/2\" – 37-1\/2\" (38.1 mm – 952.5 mm), and is supplied with a digital readout (DRO), a TF-PL setting block set and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMT-3036-50 internal range 0\" – 36\" (0 mm – 914.4 mm), external range 1-1\/2\" – 37-1\/2\" (38.1 mm – 952.5 mm)\u003c\/li\u003e\n\u003cli\u003e±.0003\" accuracy and .00005\" resolution (MT-3036-50)\u003c\/li\u003e\n\u003cli\u003eBase unit without Force-Lok, digital readout (DRO): MT-3036-50\u003c\/li\u003e\n\u003cli\u003eMT-3036-50 supplied with: DRO, TF-PL setting block set, shipping carton\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170206716017,"sku":"MT-3036-50","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-3036-50-mic-trac-36-base-unit-with-dro-25381954682993.jpg?v=1761751594"},{"product_id":"gagemaker-mt-3048-50-mic-trac-48-base-unit-with-dro","title":"Gagemaker MT-3048-50 | MIC TRAC 48\" Base Unit with DRO | ±.0004\" Accuracy, 0\" – 48\" Internal","description":"\u003cp\u003eGagemaker MT-3048-50 is a 48\" MIC TRAC™ gage setting and part measurement system without Force-Lok, rated ±.0004\" accuracy at .00005\" resolution. It measures internally from 0\" – 48\" (0 mm – 1219.2 mm) and externally from 1-1\/2\" – 49-1\/2\" (38.1 mm – 1257.3 mm), and is supplied with a digital readout (DRO), a TF-PL setting block set and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMT-3048-50 internal range 0\" – 48\" (0 mm – 1219.2 mm), external range 1-1\/2\" – 49-1\/2\" (38.1 mm – 1257.3 mm)\u003c\/li\u003e\n\u003cli\u003e±.0004\" accuracy and .00005\" resolution (MT-3048-50)\u003c\/li\u003e\n\u003cli\u003eBase unit without Force-Lok, digital readout (DRO): MT-3048-50\u003c\/li\u003e\n\u003cli\u003eMT-3048-50 supplied with: DRO, TF-PL setting block set, shipping carton\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170206781553,"sku":"MT-3048-50","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-3048-50-mic-trac-48-base-unit-with-dro-25381954748529.jpg?v=1761751593"},{"product_id":"gagemaker-mt-3012f-50-mic-trac-12-force-lok-unit-with-dro","title":"Gagemaker MT-3012F-50 | MIC TRAC 12\" Force-Lok Unit with DRO | ±.0001\" Accuracy, 0\" – 12\" Internal","description":"\u003cp\u003eWith a 0\" – 12\" internal range and 1-1\/2\" – 13-1\/2\" (38.1 mm – 342.9 mm) external range, the MT-3012F-50 is an MT-3000 series MIC TRAC™ unit with Force-Lok. The MT-3012F-50 is specified at ±.0001\" accuracy and .00005\" resolution, and ships with a digital readout (DRO), a TF-PL setting block set and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMT-3012F-50 internal range 0\" – 12\" (0 mm – 304.8 mm), external range 1-1\/2\" – 13-1\/2\" (38.1 mm – 342.9 mm)\u003c\/li\u003e\n\u003cli\u003e±.0001\" accuracy and .00005\" resolution (MT-3012F-50)\u003c\/li\u003e\n\u003cli\u003eForce-Lok, digital readout (DRO): MT-3012F-50\u003c\/li\u003e\n\u003cli\u003eMT-3012F-50 supplied with: DRO, TF-PL setting block set, shipping carton\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170206847089,"sku":"MT-3012F-50","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-3012f-50-mic-trac-12-force-lok-unit-with-dro-25381954912369.jpg?v=1761751593"},{"product_id":"gagemaker-mt-3024f-50-mic-trac-24-force-lok-unit-with-dro","title":"Gagemaker MT-3024F-50 | MIC TRAC 24\" Force-Lok Unit with DRO | ±.0002\" Accuracy, 0\" – 24\" Internal","description":"\u003cp\u003eWith a 0\" – 24\" internal range and 1-1\/2\" – 25-1\/2\" (38.1 mm – 647.7 mm) external range, the MT-3024F-50 is an MT-3000 series MIC TRAC™ unit with Force-Lok. The MT-3024F-50 is specified at ±.0002\" accuracy and .00005\" resolution, and ships with a digital readout (DRO), a TF-PL setting block set and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMT-3024F-50 internal range 0\" – 24\" (0 mm – 609.6 mm), external range 1-1\/2\" – 25-1\/2\" (38.1 mm – 647.7 mm)\u003c\/li\u003e\n\u003cli\u003e±.0002\" accuracy and .00005\" resolution (MT-3024F-50)\u003c\/li\u003e\n\u003cli\u003eForce-Lok, digital readout (DRO): MT-3024F-50\u003c\/li\u003e\n\u003cli\u003eMT-3024F-50 supplied with: DRO, TF-PL setting block set, shipping carton\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170206879857,"sku":"MT-3024F-50","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-3024f-50-mic-trac-24-force-lok-unit-with-dro-25381954977905.jpg?v=1761751592"},{"product_id":"gagemaker-mt-3036f-50-mic-trac-36-force-lok-unit-with-dro","title":"Gagemaker MT-3036F-50 | MIC TRAC 36\" Force-Lok Unit with DRO | ±.0003\" Accuracy, 0\" – 36\" Internal","description":"\u003cp\u003eWith a 0\" – 36\" internal range and 1-1\/2\" – 37-1\/2\" (38.1 mm – 952.5 mm) external range, the MT-3036F-50 is an MT-3000 series MIC TRAC™ unit with Force-Lok. The MT-3036F-50 is specified at ±.0003\" accuracy and .00005\" resolution, and ships with a digital readout (DRO), a TF-PL setting block set and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMT-3036F-50 internal range 0\" – 36\" (0 mm – 914.4 mm), external range 1-1\/2\" – 37-1\/2\" (38.1 mm – 952.5 mm)\u003c\/li\u003e\n\u003cli\u003e±.0003\" accuracy and .00005\" resolution (MT-3036F-50)\u003c\/li\u003e\n\u003cli\u003eForce-Lok, digital readout (DRO): MT-3036F-50\u003c\/li\u003e\n\u003cli\u003eMT-3036F-50 supplied with: DRO, TF-PL setting block set, shipping carton\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170206912625,"sku":"MT-3036F-50","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-3036f-50-mic-trac-36-force-lok-unit-with-dro-25381955076209.jpg?v=1761751592"},{"product_id":"gagemaker-mt-3048f-50-mic-trac-48-force-lok-unit-with-dro","title":"Gagemaker MT-3048F-50 | MIC TRAC 48\" Force-Lok Unit with DRO | ±.0004\" Accuracy, 0\" – 48\" Internal","description":"\u003cp\u003eWith a 0\" – 48\" internal range and 1-1\/2\" – 49-1\/2\" (38.1 mm – 1257.3 mm) external range, the MT-3048F-50 is an MT-3000 series MIC TRAC™ unit with Force-Lok. The MT-3048F-50 is specified at ±.0004\" accuracy and .00005\" resolution, and ships with a digital readout (DRO), a TF-PL setting block set and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMT-3048F-50 internal range 0\" – 48\" (0 mm – 1219.2 mm), external range 1-1\/2\" – 49-1\/2\" (38.1 mm – 1257.3 mm)\u003c\/li\u003e\n\u003cli\u003e±.0004\" accuracy and .00005\" resolution (MT-3048F-50)\u003c\/li\u003e\n\u003cli\u003eForce-Lok, digital readout (DRO): MT-3048F-50\u003c\/li\u003e\n\u003cli\u003eMT-3048F-50 supplied with: DRO, TF-PL setting block set, shipping carton\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170206978161,"sku":"MT-3048F-50","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-3048f-50-mic-trac-48-force-lok-unit-with-dro-25381955272817.jpg?v=1761751591"},{"product_id":"gagemaker-mt-3012f-50-usbc-mic-trac-12-force-lok-unit-with-a-computer-and-mt-4-usb","title":"Gagemaker MT-3012F-50-USBC | MIC TRAC 12\" Force-Lok Unit with Computer \u0026 MT-4-USB | ±.0001\" Accuracy","description":"\u003cp\u003eThe MT-3012F-50-USBC MIC TRAC™ with Force-Lok sets gages and measures parts up to 12\" internally, at ±.0001\" accuracy. For the MT-3012F-50-USBC the external range is 1-1\/2\" – 13-1\/2\" (38.1 mm – 342.9 mm), resolution is .00005\", and the package includes a computer pre-installed with CERTIFI and TDWin, the MT-4-USB interface device, a TF-PL setting block set and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMT-3012F-50-USBC internal range 0\" – 12\" (0 mm – 304.8 mm), external range 1-1\/2\" – 13-1\/2\" (38.1 mm – 342.9 mm)\u003c\/li\u003e\n\u003cli\u003e±.0001\" accuracy and .00005\" resolution (MT-3012F-50-USBC)\u003c\/li\u003e\n\u003cli\u003eForce-Lok, computer with MT-4-USB interface: MT-3012F-50-USBC\u003c\/li\u003e\n\u003cli\u003eMT-3012F-50-USBC supplied with: Computer (CERTIFI, TDWin), MT-4-USB, TF-PL setting blocks, carton\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170207010929,"sku":"MT-3012F-50-USBC","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-3012f-50-usbc-mic-trac-12-force-lok-unit-with-a-computer-and-mt-4-usb-25381955338353.jpg?v=1761751590"},{"product_id":"gagemaker-mt-3024f-50-usbc-mic-trac-24-force-lok-unit-with-a-computer-and-mt-4-usb","title":"Gagemaker MT-3024F-50-USBC | MIC TRAC 24\" Force-Lok Unit with Computer \u0026 MT-4-USB | ±.0002\" Accuracy","description":"\u003cp\u003eThe MT-3024F-50-USBC MIC TRAC™ with Force-Lok sets gages and measures parts up to 24\" internally, at ±.0002\" accuracy. For the MT-3024F-50-USBC the external range is 1-1\/2\" – 25-1\/2\" (38.1 mm – 647.7 mm), resolution is .00005\", and the package includes a computer pre-installed with CERTIFI and TDWin, the MT-4-USB interface device, a TF-PL setting block set and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMT-3024F-50-USBC internal range 0\" – 24\" (0 mm – 609.6 mm), external range 1-1\/2\" – 25-1\/2\" (38.1 mm – 647.7 mm)\u003c\/li\u003e\n\u003cli\u003e±.0002\" accuracy and .00005\" resolution (MT-3024F-50-USBC)\u003c\/li\u003e\n\u003cli\u003eForce-Lok, computer with MT-4-USB interface: MT-3024F-50-USBC\u003c\/li\u003e\n\u003cli\u003eMT-3024F-50-USBC supplied with: Computer (CERTIFI, TDWin), MT-4-USB, TF-PL setting blocks, carton\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170207076465,"sku":"MT-3024F-50-USBC","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-3024f-50-usbc-mic-trac-24-force-lok-unit-with-a-computer-and-mt-4-usb-25381955600497.jpg?v=1761751591"},{"product_id":"gagemaker-mt-3036f-50-usbc-mic-trac-36-force-lok-unit-with-a-computer-and-mt-4-usb","title":"Gagemaker MT-3036F-50-USBC | MIC TRAC 36\" Force-Lok Unit with Computer \u0026 MT-4-USB | ±.0003\" Accuracy","description":"\u003cp\u003eThe MT-3036F-50-USBC MIC TRAC™ with Force-Lok sets gages and measures parts up to 36\" internally, at ±.0003\" accuracy. For the MT-3036F-50-USBC the external range is 1-1\/2\" – 37-1\/2\" (38.1 mm – 952.5 mm), resolution is .00005\", and the package includes a computer pre-installed with CERTIFI and TDWin, the MT-4-USB interface device, a TF-PL setting block set and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMT-3036F-50-USBC internal range 0\" – 36\" (0 mm – 914.4 mm), external range 1-1\/2\" – 37-1\/2\" (38.1 mm – 952.5 mm)\u003c\/li\u003e\n\u003cli\u003e±.0003\" accuracy and .00005\" resolution (MT-3036F-50-USBC)\u003c\/li\u003e\n\u003cli\u003eForce-Lok, computer with MT-4-USB interface: MT-3036F-50-USBC\u003c\/li\u003e\n\u003cli\u003eMT-3036F-50-USBC supplied with: Computer (CERTIFI, TDWin), MT-4-USB, TF-PL setting blocks, carton\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170207109233,"sku":"MT-3036F-50-USBC","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-3036f-50-usbc-mic-trac-36-force-lok-unit-with-a-computer-and-mt-4-usb-25381956288625.jpg?v=1761751590"},{"product_id":"gagemaker-mt-3048f-50-usbc-mic-trac-48-force-lok-unit-with-a-computer-and-mt-4-usb","title":"Gagemaker MT-3048F-50-USBC | MIC TRAC 48\" Force-Lok Unit with Computer \u0026 MT-4-USB | ±.0004\" Accuracy","description":"\u003cp\u003eThe MT-3048F-50-USBC MIC TRAC™ with Force-Lok sets gages and measures parts up to 48\" internally, at ±.0004\" accuracy. For the MT-3048F-50-USBC the external range is 1-1\/2\" – 49-1\/2\" (38.1 mm – 1257.3 mm), resolution is .00005\", and the package includes a computer pre-installed with CERTIFI and TDWin, the MT-4-USB interface device, a TF-PL setting block set and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMT-3048F-50-USBC internal range 0\" – 48\" (0 mm – 1219.2 mm), external range 1-1\/2\" – 49-1\/2\" (38.1 mm – 1257.3 mm)\u003c\/li\u003e\n\u003cli\u003e±.0004\" accuracy and .00005\" resolution (MT-3048F-50-USBC)\u003c\/li\u003e\n\u003cli\u003eForce-Lok, computer with MT-4-USB interface: MT-3048F-50-USBC\u003c\/li\u003e\n\u003cli\u003eMT-3048F-50-USBC supplied with: Computer (CERTIFI, TDWin), MT-4-USB, TF-PL setting blocks, carton\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170207142001,"sku":"MT-3048F-50-USBC","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-3048f-50-usbc-mic-trac-48-force-lok-unit-with-a-computer-and-mt-4-usb-25381956386929.jpg?v=1761751589"},{"product_id":"gagemaker-mt-4012-10-mic-trac-4000-base-unit-0-12-with-computer-software-tf-2r-setting-blocks-and-shipping-carton","title":"Gagemaker MT-4012-10 | MIC TRAC 4000 Base Unit, 0\" – 12\" | ±.00005\" Accuracy, .00001\" Resolution","description":"\u003cp\u003eGagemaker MT-4012-10 is the MIC TRAC™ 4000 base unit with a 0\" – 12\" internal range, ±.00005\" accuracy and .00001\" resolution. The MT-4012-10 comes with a computer running digital readout software with extended functions, TF-2R setting blocks and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInternal range for MT-4012-10: 0\" – 12\" (0 mm – 304.8 mm)\u003c\/li\u003e\n\u003cli\u003eMT-4012-10 accuracy ±.00005\", resolution .00001\"\u003c\/li\u003e\n\u003cli\u003eMT-4012-10 includes computer and digital readout software with extended functions\u003c\/li\u003e\n\u003cli\u003eTF-2R setting blocks and shipping carton supplied with the MT-4012-10\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170207174769,"sku":"MT-4012-10","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-4012-10-mic-trac-4000-base-unit-0-12-with-computer-software-tf-2r-setting-blocks-and-shipping-carton-25381956780145.jpg?v=1761751588"},{"product_id":"gagemaker-mt-4024-10-mic-trac-4000-base-unit-0-24-with-computer-software-tf-2r-setting-blocks-and-shipping-carton","title":"Gagemaker MT-4024-10 | MIC TRAC 4000 Base Unit, 0\" – 24\" | ±.00005\" Accuracy, .00001\" Resolution","description":"\u003cp\u003eCovering internal measurements from 0\" to 24\", the MT-4024-10 MIC TRAC™ 4000 base unit is specified at ±.00005\" accuracy with .00001\" resolution. Supplied with the MT-4024-10: a computer, extended-function digital readout software, TF-2R setting blocks and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInternal range for MT-4024-10: 0\" – 24\" (0 mm – 609.6 mm)\u003c\/li\u003e\n\u003cli\u003eMT-4024-10 accuracy ±.00005\", resolution .00001\"\u003c\/li\u003e\n\u003cli\u003eMT-4024-10 includes computer and digital readout software with extended functions\u003c\/li\u003e\n\u003cli\u003eTF-2R setting blocks and shipping carton supplied with the MT-4024-10\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170207240305,"sku":"MT-4024-10","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-4024-10-mic-trac-4000-base-unit-0-24-with-computer-software-tf-2r-setting-blocks-and-shipping-carton-25381956943985.jpg?v=1761751588"},{"product_id":"gagemaker-mt-4036-10-mic-trac-4000-base-unit-0-36-with-computer-software-tf-2r-setting-blocks-and-shipping-carton","title":"Gagemaker MT-4036-10 | MIC TRAC 4000 Base Unit, 0\" – 36\" | ±.00005\" Accuracy, .00001\" Resolution","description":"\u003cp\u003eThe MIC TRAC™ 4000 MT-4036-10 handles 0\" – 36\" internal work at .00001\" resolution and ±.00005\" accuracy. In the MT-4036-10 package you get a computer with digital readout software (extended functions), TF-2R setting blocks and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInternal range for MT-4036-10: 0\" – 36\" (0 mm – 914.4 mm)\u003c\/li\u003e\n\u003cli\u003eMT-4036-10 accuracy ±.00005\", resolution .00001\"\u003c\/li\u003e\n\u003cli\u003eMT-4036-10 includes computer and digital readout software with extended functions\u003c\/li\u003e\n\u003cli\u003eTF-2R setting blocks and shipping carton supplied with the MT-4036-10\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170207273073,"sku":"MT-4036-10","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-4036-10-mic-trac-4000-base-unit-0-36-with-computer-software-tf-2r-setting-blocks-and-shipping-carton-25381957075057.jpg?v=1761751588"},{"product_id":"gagemaker-mt-4048-10-mic-trac-4000-base-unit-0-48-with-computer-software-tf-2r-setting-blocks-and-shipping-carton","title":"Gagemaker MT-4048-10 | MIC TRAC 4000 Base Unit, 0\" – 48\" | ±.00005\" Accuracy, .00001\" Resolution","description":"\u003cp\u003eGagemaker MT-4048-10 is the MIC TRAC™ 4000 base unit with a 0\" – 48\" internal range, ±.00005\" accuracy and .00001\" resolution. The MT-4048-10 comes with a computer running digital readout software with extended functions, TF-2R setting blocks and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInternal range for MT-4048-10: 0\" – 48\" (0 mm – 1219.2 mm)\u003c\/li\u003e\n\u003cli\u003eMT-4048-10 accuracy ±.00005\", resolution .00001\"\u003c\/li\u003e\n\u003cli\u003eMT-4048-10 includes computer and digital readout software with extended functions\u003c\/li\u003e\n\u003cli\u003eTF-2R setting blocks and shipping carton supplied with the MT-4048-10\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170207305841,"sku":"MT-4048-10","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-4048-10-mic-trac-4000-base-unit-0-48-with-computer-software-tf-2r-setting-blocks-and-shipping-carton-25381957107825.jpg?v=1761751587"},{"product_id":"mitutoyo-293-100-10-high-accuracy-digital-micrometer-0-25mm-absolute-digimatic-2","title":"Mitutoyo 293-100-10 | High Accuracy Digital Micrometer | 0–25 mm, 0.1 µm","description":"\u003cp\u003eThe Mitutoyo 293-100-10 is a 0–25 mm ABSOLUTE Digimatic high-accuracy micrometer with a 0.1 µm resolution ABS rotary sensor, intended for very accurate hand-held work such as Gauge R\u0026amp;R studies. High-accuracy screw machining keeps instrumental error to 0.5 µm.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDigital step 0.1 µm or 0.5 µm\u003c\/li\u003e\n\u003cli\u003eRigid frame with constant-force mechanism (7–9 N)\u003c\/li\u003e\n\u003cli\u003eFlatness 0.3 µm, parallelism 0.6 µm\u003c\/li\u003e\n\u003cli\u003eSpindle lock, ø6.35 mm spindle, 0.5 mm pitch\u003c\/li\u003e\n\u003cli\u003eData output and preset; CR2032 battery, approx. 2 years life\u003c\/li\u003e\n\u003cli\u003eDelivered with box, key, driver, battery, heat insulating cover and inspection certificate\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170227785841,"sku":"293-100-10","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-high-accuracy-digital-micrometers-default-title-mitutoyo-293-100-10-high-accuracy-digital-micrometer-0-25mm-absolute-digimatic-2-25382013141105.png?v=1761751404"},{"product_id":"mitutoyo-293-130-10-high-accuracy-digital-micrometer-0-1-absolute-digimatic-2","title":"Mitutoyo 293-130-10 | High Accuracy Digital Micrometer | 0–1 in, 0.000005 in","description":"\u003cp\u003eMitutoyo 293-130-10 is an inch\/metric MDH ABSOLUTE Digimatic micrometer covering 0–1 in (0–25.4 mm) with a resolution of 0.000005 in \/ 0.1 µm, for exacting hand-held measurement. A stiff frame, constant-force ratchet and precision-cut spindle thread support steady readings, with audible clicks confirming the measurement.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 0–1 in (0–25.4 mm), inch\/metric\u003c\/li\u003e\n\u003cli\u003eCarbide-tipped faces with micro-lap finish; flatness 0.3 µm, parallelism 0.6 µm\u003c\/li\u003e\n\u003cli\u003eSpindle lock, ø6.35 mm spindle, 0.635 mm pitch\u003c\/li\u003e\n\u003cli\u003eRemovable heat shield reduces body-heat expansion errors\u003c\/li\u003e\n\u003cli\u003eData output; CR2032 battery, approx. 2 years\u003c\/li\u003e\n\u003cli\u003eIncludes box, key, driver, battery, heat insulating cover and inspection certificate\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170227916913,"sku":"293-130-10","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-high-accuracy-digital-micrometers-default-title-mitutoyo-293-130-10-high-accuracy-digital-micrometer-0-1-absolute-digimatic-2-25382013534321.png?v=1761751403"},{"product_id":"mitutoyo-293-180-30-digital-micrometer-quantumike-ip65-inch-metric-range-0-1-0-25-4-mm","title":"Mitutoyo 293-180-30 | QuantuMike Digital Micrometer IP65 | 0-1 in, with output","description":"\u003cp\u003eThe Mitutoyo 293-180-30 QuantuMike covers 0-1 in (0-25.4 mm) and reads to 0.001 mm or 0.00005 in, with ±0.00005 in (±1 µm) accuracy. This version includes SPC data output.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 0-1 in (0-25.4 mm), with SPC data output\u003c\/li\u003e\n\u003cli\u003eSpindle feeds 2 mm per thimble turn rather than the usual 0.5 mm; ratchet thimble gives a constant measuring force\u003c\/li\u003e\n\u003cli\u003eCarbide-tipped measuring faces resist wear; hold function freezes the reading for viewing away from the part\u003c\/li\u003e\n\u003cli\u003eInch\/metric switchable readout, 0.001 mm \/ 0.00005 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170228146289,"sku":"293-180-30","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-digimatic-micrometers-quantumike-ip65-default-title-mitutoyo-293-180-30-digital-micrometer-quantumike-ip65-inch-metric-range-0-1-0-25-4-mm-25382013796465.png?v=1761751402"},{"product_id":"mitutoyo-293-181-30-digital-micrometer-quantumike-ip65-inch-metric-range-1-2-25-4-50-8-mm","title":"Mitutoyo 293-181-30 | QuantuMike Digital Micrometer IP65 | 1-2 in, with output","description":"\u003cp\u003eMeasuring from 1-2 in (25.4-50.8 mm), the 293-181-30 is a coolant-proof QuantuMike digital micrometer rated IP65 with ±0.00005 in (±1 µm) accuracy. It is the variant fitted with SPC data output.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 1-2 in (25.4-50.8 mm), SPC data output fitted\u003c\/li\u003e\n\u003cli\u003eCoarse 2 mm spindle thread for quick travel to size; constant-force ratchet thimble with audible clicks\u003c\/li\u003e\n\u003cli\u003eWear-resistant carbide tips on both faces; hold key keeps the value on screen after withdrawal\u003c\/li\u003e\n\u003cli\u003eReads 0.001 mm or 0.00005 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170228310129,"sku":"293-181-30","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-digimatic-micrometers-quantumike-ip65-default-title-mitutoyo-293-181-30-digital-micrometer-quantumike-ip65-inch-metric-range-1-2-25-4-50-8-mm-25382013862001.png?v=1761751399"},{"product_id":"mitutoyo-293-182-30-digital-micrometer-quantumike-ip65-inch-metric-range-2-3-50-8-76-2-mm","title":"Mitutoyo 293-182-30 | QuantuMike Digital Micrometer IP65 | 2-3 in, with output","description":"\u003cp\u003eFor outside measurement across 2-3 in (50.8-76.2 mm), Mitutoyo's 293-182-30 QuantuMike pairs a fast 2 mm-per-turn spindle with ±0.00005 in (±1 µm) accuracy. Readings can be sent out through its SPC data output.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 2-3 in (50.8-76.2 mm), includes SPC output\u003c\/li\u003e\n\u003cli\u003eRapid 2 mm-per-revolution spindle feed; ratchet thimble clicks to confirm consistent force\u003c\/li\u003e\n\u003cli\u003eCarbide faces for long-term accuracy; built-in Hold for reading the result off the workpiece\u003c\/li\u003e\n\u003cli\u003eResolution 0.001 mm \/ 0.00005 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170228408433,"sku":"293-182-30","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-digimatic-micrometers-quantumike-ip65-default-title-mitutoyo-293-182-30-digital-micrometer-quantumike-ip65-inch-metric-range-2-3-50-8-76-2-mm-25382014156913.png?v=1761751398"},{"product_id":"mitutoyo-293-183-30-digital-micrometer-quantumike-ip65-inchmetric-range-3-4-76-2-101-6-mm","title":"Mitutoyo 293-183-30 | QuantuMike Digital Micrometer IP65 | 3-4 in, with output","description":"\u003cp\u003eThis 293-183-30 QuantuMike digital micrometer from Mitutoyo spans 3-4 in (76.2-101.6 mm) with ±0.0001 in (±2 µm) accuracy and an inch\/metric display. An SPC data output is built in on this model.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 3-4 in (76.2-101.6 mm), SPC output version\u003c\/li\u003e\n\u003cli\u003eThimble turn moves the spindle 2 mm instead of 0.5 mm; repeatable force from the ratchet thimble mechanism\u003c\/li\u003e\n\u003cli\u003eWear-resistant carbide tips on both faces; hold function freezes the reading for viewing away from the part\u003c\/li\u003e\n\u003cli\u003eInch or metric display to 0.00005 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170228506737,"sku":"293-183-30","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-digimatic-micrometers-quantumike-ip65-default-title-mitutoyo-293-183-30-digital-micrometer-quantumike-ip65-inchmetric-range-3-4-76-2-101-6-mm-25382015041649.png?v=1761751396"},{"product_id":"mitutoyo-293-185-30-digital-micrometer-quantumike-ip65-inch-metric-range-0-1-0-25-4-mm-w-o-output","title":"Mitutoyo 293-185-30 | QuantuMike Digital Micrometer IP65 | 0-1 in, no output","description":"\u003cp\u003eThe Mitutoyo 293-185-30 QuantuMike covers 0-1 in (0-25.4 mm) and reads to 0.001 mm or 0.00005 in, with ±0.00005 in (±1 µm) accuracy. This version has no data output, so readings are taken from the display.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 0-1 in (0-25.4 mm), no output port\u003c\/li\u003e\n\u003cli\u003eSpindle feeds 2 mm per thimble turn rather than the usual 0.5 mm; constant-force ratchet thimble with audible clicks\u003c\/li\u003e\n\u003cli\u003eCarbide faces for long-term accuracy; hold key keeps the value on screen after withdrawal\u003c\/li\u003e\n\u003cli\u003eSwitchable inch\/metric reading\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170228539505,"sku":"293-185-30","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-digimatic-micrometers-quantumike-ip65-default-title-mitutoyo-293-185-30-digital-micrometer-quantumike-ip65-inch-metric-range-0-1-0-25-4-mm-w-o-output-25382015107185.png?v=1761751396"},{"product_id":"mitutoyo-293-187-30-digital-micrometer-quantumike-ip65-inch-metric-range-2-3-50-8-76-2-mm-w-o-output","title":"Mitutoyo 293-187-30 | QuantuMike Digital Micrometer IP65 | 2-3 in, no output","description":"\u003cp\u003eFor outside measurement across 2-3 in (50.8-76.2 mm), Mitutoyo's 293-187-30 QuantuMike pairs a fast 2 mm-per-turn spindle with ±0.00005 in (±1 µm) accuracy. No data output is fitted on this model.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 2-3 in (50.8-76.2 mm), display-only version\u003c\/li\u003e\n\u003cli\u003eRapid 2 mm-per-revolution spindle feed; repeatable force from the ratchet thimble mechanism\u003c\/li\u003e\n\u003cli\u003eCarbide faces for long-term accuracy; hold function freezes the reading for viewing away from the part\u003c\/li\u003e\n\u003cli\u003eMetric or inch readout at 0.00005 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170228703345,"sku":"293-187-30","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-digimatic-micrometers-quantumike-ip65-default-title-mitutoyo-293-187-30-digital-micrometer-quantumike-ip65-inch-metric-range-2-3-50-8-76-2-mm-w-o-output-25382015336561.png?v=1761751394"},{"product_id":"mitutoyo-293-188-30-digital-micrometer-quantumike-ip65-inch-metric-range-3-4-76-2-101-6-mm-w-o-output","title":"Mitutoyo 293-188-30 | QuantuMike Digital Micrometer IP65 | 3-4 in, no output","description":"\u003cp\u003eThis 293-188-30 QuantuMike digital micrometer from Mitutoyo spans 3-4 in (76.2-101.6 mm) with ±0.0001 in (±2 µm) accuracy and an inch\/metric display. This model is supplied without a data output.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 3-4 in (76.2-101.6 mm), without data output\u003c\/li\u003e\n\u003cli\u003eFast 2 mm spindle pitch shortens set-up time between sizes; ratchet thimble gives a constant measuring force\u003c\/li\u003e\n\u003cli\u003eCarbide-tipped measuring faces resist wear; hold key keeps the value on screen after withdrawal\u003c\/li\u003e\n\u003cli\u003eDisplays inch or metric values\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170228834417,"sku":"293-188-30","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-digimatic-micrometers-quantumike-ip65-default-title-mitutoyo-293-188-30-digital-micrometer-quantumike-ip65-inch-metric-range-3-4-76-2-101-6-mm-w-o-output-25382015434865.png?v=1761751393"},{"product_id":"mitutoyo-129-110-depth-micrometer-interchangeable-rods-0-75mm-63mm-base","title":"Mitutoyo 129-110 | Depth Micrometer | Interchangeable rods, 0-75 mm, 63 mm base","description":"\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart No. 129-110 | Mitutoyo Series 129\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe Mitutoyo 129-110 depth micrometer provides accurate metric depth measurement from 0 to 75 mm using three interchangeable measuring rods. Its 63.5 × 16 mm hardened, ground and micro-lapped base provides a compact reference surface for measuring features where a wider base may overhang the available area.\u003c\/p\u003e\n\u003cp\u003eThe three interchangeable ø4 mm rods extend the measuring range in 25 mm increments, allowing one instrument to cover depths throughout the 0–75 mm range. Each rod has a lapped measuring face, while the measuring-rod clamp secures the selected rod during use.\u003c\/p\u003e\n\u003cp\u003eA ratchet stop helps maintain consistent measuring force for repeatable readings. With 0.01 mm graduation and ±3 µm micrometer head accuracy, the 129-110 is suited to dimensional inspection of machined components.\u003c\/p\u003e\n\u003cp\u003eTypical applications include counterbore depths, slot and keyway depths, step heights, shoulder distances, holes and recessed features. The compact 63.5 × 16 mm base is particularly useful for narrower shoulders, smaller openings and recessed areas where a wider depth-micrometer base could interfere with the surrounding surface.\u003c\/p\u003e\n\u003cp\u003eFor measurements up to 100 mm with the same compact base, see the Mitutoyo 129-111. For a shorter 0–50 mm range, see the Mitutoyo 129-109.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cp\u003eFull 0–75 mm measuring range: three interchangeable rods cover the range in 25 mm increments.\u003c\/p\u003e\n\u003cp\u003ePrecise metric readings: 0.01 mm graduation with ±3 µm micrometer head accuracy.\u003c\/p\u003e\n\u003cp\u003eCompact reference base: the 63.5 × 16 mm hardened, ground and micro-lapped base suits narrower shoulders and smaller openings.\u003c\/p\u003e\n\u003cp\u003eRepeatable measuring force: the ratchet stop helps maintain consistent contact pressure.\u003c\/p\u003e\n\u003cp\u003eSecure rod positioning: the measuring-rod clamp holds the selected measuring rod firmly.\u003c\/p\u003e\n\u003cp\u003eFlexible depth measurement: interchangeable rods allow multiple depth ranges to be measured with one instrument.\u003c\/p\u003e\n\u003cp\u003eNeed a price or delivery time for the 129-110? Call \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e for a fast quote.\u003c\/p\u003e\n\u003ch2\u003eWho This Product Is Best For\u003c\/h2\u003e\n\u003cp\u003eThe Mitutoyo 129-110 is suited to machine shops, mould and die makers, quality inspectors and maintenance teams that require reliable metric depth measurement up to 75 mm.\u003c\/p\u003e\n\u003cp\u003eIt is useful for checking first-off parts, verifying machined features between operations, measuring counterbores and recessed areas, and inspecting slot, keyway, step and shoulder dimensions.\u003c\/p\u003e\n\u003cp\u003eThe compact 63.5 × 16 mm base makes the 129-110 particularly useful where measurement access is restricted or a larger reference base could overhang the component.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eSelect the interchangeable rod appropriate for the required depth and secure it using the measuring-rod clamp.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCheck the instrument against a suitable reference surface or standard before critical measurements.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePlace the base flat and square across the opening or reference surface.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTurn the micrometer thimble until the measuring rod contacts the bottom of the feature.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFinish the measurement using the ratchet stop to help apply consistent measuring force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the sleeve and thimble and account for the selected rod length to determine the total depth.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the Mitutoyo 129-110 used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 129-110 measures the depth of holes, slots, steps, recesses, counterbores and similar features from 0 to 75 mm using three interchangeable rods and a 63.5 × 16 mm base.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Mitutoyo 129-110?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe micrometer head has an accuracy of ±3 µm. The interchangeable rod accuracy is specified as ±(2 + L\/75) µm, where L is the maximum measuring length in millimetres.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do the interchangeable rods work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 129-110 uses three ø4 mm interchangeable rods in 25 mm increments. Select the rod appropriate for the required depth, secure it with the clamp, and use the micrometer head for the final measurement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 129-110 and 129-109?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 129-110 covers 0–75 mm using three interchangeable rods, while the 129-109 covers 0–50 mm using two interchangeable rods. Both models use a 63.5 × 16 mm compact base.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 129-110 and 129-111?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth models use a 63.5 × 16 mm base and interchangeable rods in 25 mm increments. The 129-110 covers 0–75 mm with three rods, while the 129-111 extends the range to 0–100 mm with four rods.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat type of base does the 129-110 have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 129-110 has a 63.5 × 16 mm hardened, ground and micro-lapped base. Its compact dimensions make it useful around narrower shoulders, smaller openings and recessed features.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I buy the Mitutoyo 129-110 in Kuwait?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCall Al Belad General Tech Services on \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e or email \u003ca href=\"mailto:mathews@generaltechkuwait.com\"\u003emathews@generaltechkuwait.com\u003c\/a\u003e for pricing and delivery information.\u003c\/p\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170229325937,"sku":"129-110","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-depth-micrometers-default-title-mitutoyo-129-110-depth-micrometer-interchangeable-rods-0-75mm-63mm-base-25382016417905.png?v=1761751384"},{"product_id":"mitutoyo-129-111-depth-micrometer-interchangeable-rods-0-100mm-63mm-base","title":"Mitutoyo 129-111 | Depth Micrometer | Interchangeable rods, 0-100 mm, 63 mm base","description":"\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart No. 129-111 | Mitutoyo Series 129\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe Mitutoyo 129-111 depth micrometer provides accurate metric depth measurement from 0 to 100 mm using four interchangeable measuring rods. Its 63.5 × 16 mm hardened, ground and micro-lapped base provides a compact reference surface for measuring features where a wider base may overhang the available area.\u003c\/p\u003e\n\u003cp\u003eThe four interchangeable ø4 mm rods extend the measuring range in 25 mm increments, allowing one instrument to cover depths throughout the 0–100 mm range. Each rod has a lapped measuring face, while the measuring-rod clamp secures the selected rod during use.\u003c\/p\u003e\n\u003cp\u003eA ratchet stop helps maintain consistent measuring force for repeatable readings. With 0.01 mm graduation and ±3 µm micrometer head accuracy, the 129-111 is suited to dimensional inspection of machined components.\u003c\/p\u003e\n\u003cp\u003eTypical applications include counterbore depths, slot and keyway depths, step heights, shoulder distances, holes and recessed features. The compact base is particularly useful for narrower shoulders, smaller openings and recessed areas where a wider depth-micrometer base could interfere with the surrounding surface.\u003c\/p\u003e\n\u003cp\u003eFor a larger 0–150 mm measuring range with the same compact 63.5 × 16 mm base, see the Mitutoyo 129-112. For measurements up to 75 mm, see the Mitutoyo 129-110.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cp\u003eFull 0–100 mm measuring range: four interchangeable rods cover the range in 25 mm increments.\u003c\/p\u003e\n\u003cp\u003ePrecise metric readings: 0.01 mm graduation with ±3 µm micrometer head accuracy.\u003c\/p\u003e\n\u003cp\u003eCompact reference base: the 63.5 × 16 mm hardened, ground and micro-lapped base suits narrower shoulders and smaller openings.\u003c\/p\u003e\n\u003cp\u003eRepeatable measuring force: the ratchet stop helps maintain consistent contact pressure.\u003c\/p\u003e\n\u003cp\u003eSecure rod positioning: the measuring-rod clamp holds the selected measuring rod firmly.\u003c\/p\u003e\n\u003cp\u003eFlexible depth measurement: interchangeable rods allow multiple depth ranges to be measured with one instrument.\u003c\/p\u003e\n\u003cp\u003eNeed a price or delivery time for the 129-111? Call \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e for a fast quote.\u003c\/p\u003e\n\u003ch2\u003eWho This Product Is Best For\u003c\/h2\u003e\n\u003cp\u003eThe Mitutoyo 129-111 is suited to machine shops, mould and die makers, quality inspectors and maintenance teams that require reliable metric depth measurement up to 100 mm.\u003c\/p\u003e\n\u003cp\u003eIt is useful for checking first-off parts, verifying machined features between operations, measuring counterbores and recessed areas, and inspecting slot, keyway, step and shoulder dimensions.\u003c\/p\u003e\n\u003cp\u003eThe compact 63.5 × 16 mm base makes the 129-111 particularly useful where measurement access is restricted or a larger reference base could overhang the component.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eSelect the interchangeable rod appropriate for the required depth and secure it using the measuring-rod clamp.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCheck the instrument against a suitable reference surface or standard before critical measurements.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePlace the base flat and square across the opening or reference surface.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTurn the micrometer thimble until the measuring rod contacts the bottom of the feature.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFinish the measurement using the ratchet stop to help apply consistent measuring force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the sleeve and thimble and account for the selected rod length to determine the total depth.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the Mitutoyo 129-111 used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 129-111 measures the depth of holes, slots, steps, recesses, counterbores and similar features from 0 to 100 mm using four interchangeable rods and a 63.5 × 16 mm base.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Mitutoyo 129-111?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe micrometer head has an accuracy of ±3 µm. The interchangeable rod accuracy is specified as ±(2 + L\/75) µm, where L is the maximum measuring length in millimetres.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do the interchangeable rods work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 129-111 uses four ø4 mm interchangeable rods in 25 mm increments. Select the rod appropriate for the required depth, secure it with the clamp, and use the micrometer head for the final measurement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 129-111 and 129-112?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth models use a 63.5 × 16 mm base and four or more interchangeable rods in 25 mm increments. The 129-111 covers 0–100 mm with four rods, while the 129-112 extends the range to 0–150 mm with six rods.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 129-111 and 129-110?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 129-111 covers 0–100 mm using four interchangeable rods, while the 129-110 covers 0–75 mm. The 129-110 is intended for applications where the required depth does not exceed 75 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat type of base does the 129-111 have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 129-111 has a 63.5 × 16 mm hardened, ground and micro-lapped base. Its compact dimensions make it useful around narrower shoulders, smaller openings and recessed features.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I buy the Mitutoyo 129-111 in Kuwait?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCall Al Belad General Tech Services on \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e or email \u003ca href=\"mailto:mathews@generaltechkuwait.com\"\u003emathews@generaltechkuwait.com\u003c\/a\u003e for pricing and delivery information.\u003c\/p\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170229358705,"sku":"129-111","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-depth-micrometers-default-title-mitutoyo-129-111-depth-micrometer-interchangeable-rods-0-100mm-63mm-base-25382016450673.png?v=1761751383"},{"product_id":"mitutoyo-129-112-depth-micrometer-interchangeable-rods-0-150mm-63mm-base","title":"Mitutoyo 129-112 | Depth Micrometer | Interchangeable rods, 0-150 mm, 63 mm base","description":"\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart No. 129-112 | Mitutoyo Series 129\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe Mitutoyo 129-112 depth micrometer provides accurate metric depth measurement from 0 to 150 mm using six interchangeable measuring rods. Its 63.5 × 16 mm hardened, ground and micro-lapped base provides a compact reference surface for measuring features where a wider base may overhang the available area.\u003c\/p\u003e\n\u003cp\u003eThe six interchangeable ø4 mm rods extend the measuring range in 25 mm increments, allowing one instrument to cover depths throughout the 0–150 mm range. Each rod has a lapped measuring face, while the measuring-rod clamp secures the selected rod during use.\u003c\/p\u003e\n\u003cp\u003eA ratchet stop helps maintain consistent measuring force for repeatable readings. With 0.01 mm graduation and ±3 µm micrometer head accuracy, the 129-112 is suited to dimensional inspection of machined components.\u003c\/p\u003e\n\u003cp\u003eTypical applications include counterbore depths, slot and keyway depths, step heights, shoulder distances, holes and recessed features. The compact base is particularly useful for narrower shoulders, smaller openings and recessed areas where a wider depth-micrometer base could interfere with the surrounding surface.\u003c\/p\u003e\n\u003cp\u003eFor the same 0–150 mm range with a wider 101.6 × 16 mm base, see the Mitutoyo 129-116. For measurements up to 100 mm, see the Mitutoyo 129-111.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cp\u003eFull 0–150 mm measuring range: six interchangeable rods cover the range in 25 mm increments.\u003c\/p\u003e\n\u003cp\u003ePrecise metric readings: 0.01 mm graduation with ±3 µm micrometer head accuracy.\u003c\/p\u003e\n\u003cp\u003eCompact reference base: the 63.5 × 16 mm hardened, ground and micro-lapped base suits narrower shoulders and smaller openings.\u003c\/p\u003e\n\u003cp\u003eRepeatable measuring force: the ratchet stop helps maintain consistent contact pressure.\u003c\/p\u003e\n\u003cp\u003eSecure rod positioning: the measuring-rod clamp holds the selected measuring rod firmly.\u003c\/p\u003e\n\u003cp\u003eFlexible depth measurement: interchangeable rods allow multiple depth ranges to be measured with one instrument.\u003c\/p\u003e\n\u003cp\u003eNeed a price or delivery time for the 129-112? Call \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e for a fast quote.\u003c\/p\u003e\n\u003ch2\u003eWho This Product Is Best For\u003c\/h2\u003e\n\u003cp\u003eThe Mitutoyo 129-112 is suited to machine shops, mould and die makers, quality inspectors and maintenance teams that require reliable metric depth measurement up to 150 mm.\u003c\/p\u003e\n\u003cp\u003eIt is useful for checking first-off parts, verifying machined features between operations, measuring counterbores and recessed areas, and inspecting slot, keyway, step and shoulder dimensions.\u003c\/p\u003e\n\u003cp\u003eThe compact 63.5 × 16 mm base makes the 129-112 particularly useful where measurement access is restricted or a larger reference base could overhang the component.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eSelect the interchangeable rod appropriate for the required depth and secure it using the measuring-rod clamp.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCheck the instrument against a suitable reference surface or standard before critical measurements.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePlace the base flat and square across the opening or reference surface.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTurn the micrometer thimble until the measuring rod contacts the bottom of the feature.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFinish the measurement using the ratchet stop to help apply consistent measuring force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the sleeve and thimble and account for the selected rod length to determine the total depth.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the Mitutoyo 129-112 used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 129-112 measures the depth of holes, slots, steps, recesses, counterbores and similar features from 0 to 150 mm using six interchangeable rods and a 63.5 × 16 mm base.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Mitutoyo 129-112?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe micrometer head has an accuracy of ±3 µm. The interchangeable rod accuracy is specified as ±(2 + L\/75) µm, where L is the maximum measuring length in millimetres.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do the interchangeable rods work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 129-112 uses six ø4 mm interchangeable rods in 25 mm increments. Select the rod appropriate for the required depth, secure it with the clamp, and use the micrometer head for the final measurement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 129-112 and 129-116?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth models cover 0–150 mm and use six interchangeable rods. The 129-112 has a compact 63.5 × 16 mm base, while the 129-116 has a wider 101.6 × 16 mm base. The 129-112 is useful where a narrower reference base is preferred, while the 129-116 provides a broader reference surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 129-112 and 129-111?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 129-112 covers 0–150 mm using six interchangeable rods. The 129-111 covers 0–100 mm, making it suitable when the required measuring depth does not exceed 100 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I buy the Mitutoyo 129-112 in Kuwait?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCall Al Belad General Tech Services on \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e or email \u003ca href=\"mailto:mathews@generaltechkuwait.com\"\u003emathews@generaltechkuwait.com\u003c\/a\u003e for pricing and delivery information.\u003c\/p\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170229391473,"sku":"129-112","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-depth-micrometers-default-title-mitutoyo-129-112-depth-micrometer-interchangeable-rods-0-150mm-63mm-base-25382017433713.png?v=1761751382"},{"product_id":"mitutoyo-129-129-depth-micrometer-interchangeable-rods-0-2-4-base","title":"Mitutoyo 129-129 | Depth Micrometer | Interchangeable rods, 0-2\", 4\" base","description":"\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart No. 129-129 | Mitutoyo Series 129\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe Mitutoyo 129-129 depth micrometer provides accurate inch-based depth measurement from 0 to 2\" using two interchangeable measuring rods. Its 4\" × .63\" hardened, ground and micro-lapped base provides a broad, stable reference surface across openings, shoulders and recessed features.\u003c\/p\u003e\n\u003cp\u003eThe two interchangeable ø4 mm rods extend the measuring range in 1\" increments, allowing one instrument to cover depths throughout the 0–2\" range. Each rod has a lapped measuring face, while the measuring-rod clamp secures the selected rod during use.\u003c\/p\u003e\n\u003cp\u003eA ratchet stop helps maintain consistent measuring force for repeatable readings. With .001\" graduation and ±.00012\" micrometer head accuracy, the 129-129 is suited to dimensional inspection of machined components.\u003c\/p\u003e\n\u003cp\u003eTypical applications include counterbore depths, slot and keyway depths, step heights, shoulder distances, holes and recessed features. The wide 4\" × .63\" base provides a broad reference surface for larger openings, housings, castings and flanges.\u003c\/p\u003e\n\u003cp\u003eFor a larger 0–3\" measuring range with the same 4\" × .63\" base, see the Mitutoyo 129-130.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cp\u003eFull 0–2\" measuring range: two interchangeable rods cover the range in 1\" increments.\u003c\/p\u003e\n\u003cp\u003ePrecise inch readings: .001\" graduation with ±.00012\" micrometer head accuracy.\u003c\/p\u003e\n\u003cp\u003eStable reference base: the 4\" × .63\" hardened, ground and micro-lapped base provides broad contact across the opening.\u003c\/p\u003e\n\u003cp\u003eRepeatable measuring force: the ratchet stop helps maintain consistent contact pressure.\u003c\/p\u003e\n\u003cp\u003eSecure rod positioning: the measuring-rod clamp holds the selected measuring rod firmly.\u003c\/p\u003e\n\u003cp\u003eFlexible depth measurement: interchangeable rods allow multiple depth ranges to be measured with one instrument.\u003c\/p\u003e\n\u003cp\u003eNeed a price or delivery time for the 129-129? Call \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e for a fast quote.\u003c\/p\u003e\n\u003ch2\u003eWho This Product Is Best For\u003c\/h2\u003e\n\u003cp\u003eThe Mitutoyo 129-129 is suited to machine shops, mould and die makers, quality inspectors and maintenance teams that require reliable inch-based depth measurement up to 2\".\u003c\/p\u003e\n\u003cp\u003eIt is useful for checking first-off parts, verifying machined features between operations, measuring counterbores and recessed areas, and inspecting slot, keyway, step and shoulder dimensions.\u003c\/p\u003e\n\u003cp\u003eThe broad 4\" × .63\" base makes the 129-129 particularly suitable when a stable reference surface is useful across larger openings and component surfaces.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eSelect the interchangeable rod appropriate for the required depth and secure it using the measuring-rod clamp.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCheck the instrument against a suitable reference surface or standard before critical measurements.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePlace the base flat and square across the opening or reference surface.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTurn the micrometer thimble until the measuring rod contacts the bottom of the feature.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFinish the measurement using the ratchet stop to help apply consistent measuring force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the sleeve and thimble and account for the selected rod length to determine the total depth.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the Mitutoyo 129-129 used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 129-129 measures the depth of holes, slots, steps, recesses, counterbores and similar features from 0 to 2\" using two interchangeable rods and a 4\" × .63\" base.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Mitutoyo 129-129?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe micrometer head has an accuracy of ±.00012\". The interchangeable rod accuracy is specified as ±(2 + L\/75) µm, where L is the maximum measuring length in millimetres.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do the interchangeable rods work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 129-129 uses two ø4 mm interchangeable rods in 1\" increments. Select the rod appropriate for the required depth, secure it with the clamp, and use the micrometer head for the final measurement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 129-129 and 129-130?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 129-129 covers 0–2\" using two interchangeable rods, while the 129-130 extends the range to 0–3\" using three interchangeable rods. Both models use a 4\" × .63\" base.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat type of base does the 129-129 have?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 129-129 has a 4\" × .63\" hardened, ground and micro-lapped base designed to provide a broad reference surface during depth measurement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I buy the Mitutoyo 129-129 in Kuwait?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCall Al Belad General Tech Services on \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e or email \u003ca href=\"mailto:mathews@generaltechkuwait.com\"\u003emathews@generaltechkuwait.com\u003c\/a\u003e for pricing and delivery information.\u003c\/p\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170229489777,"sku":"129-129","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-depth-micrometers-default-title-mitutoyo-129-129-depth-micrometer-interchangeable-rods-0-2-4-base-25382017663089.png?v=1761751381"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/collections\/micrometer_75cce8f0-0a5f-42b3-862a-d86dfcd657af.jpg?v=1794370762","url":"https:\/\/www.generaltechkuwait.com\/collections\/measurement-micrometers.oembed","provider":"General Tech Services LLC","version":"1.0","type":"link"}