ASCO CYLINDERS WITH PROFILED BARREL ˜ 32 to 80 mm - double acting ISO 15552-AFNOR-DIN with omega formed piston seal, Series 453, Type PES © P-DM
Part No. Series 453 PES-P-DM
ASCO Series 453 profiled-barrel cylinders with an omega-formed piston seal are double-acting ISO 15552 (AFNOR/DIN) actuators available in 32 to 80 mm bores for industrial automation. The omega-formed piston seal provides sealing in both directions while maintaining a compact piston design. Genuine ASCO cylinder, supplied in the UAE by General Tech Services LLC. Pricing is quote-based. Request a quote in under a minute - call +971 6 543 6933.
The Series 453 uses a profiled aluminium barrel and an omega-formed piston seal designed for consistent sealing across the stroke. This configuration is suitable for applications where smooth, consistent movement and reduced stick-slip are important.
The profiled barrel includes integrated grooves for position detectors such as ASCO Series 494, allowing end-of-stroke feedback devices to be installed without additional brackets. Double-acting operation provides controlled force and movement in both directions.
ISO 15552 (AFNOR/DIN) dimensions allow the cylinder to use standard ISO mountings, rod ends and guiding units. When sizing the cylinder, consider the required force, available working air pressure, stroke, friction and dynamic loads. Long strokes with side loads may require a guiding unit. Share the bore, stroke, mounting and application details with our team for code and accessory confirmation.
For applications requiring pneumatic cushioning, the Series 453 PES-P-DM cushioned cylinder is an alternative configuration.
Ready to order the ASCO Series 453 PES-P-DM? Speak to our team. Call +971 6 543 6933
Key Benefits
-
ISO 15552 (AFNOR/DIN) dimensions for compatible replacement applications
-
32 to 80 mm bore range
-
Double-acting pneumatic operation
-
Omega-formed piston seal for consistent sealing in both directions
-
Compact piston seal design
-
Profiled aluminium barrel with integrated sensor grooves
-
Compatible with standard ISO mountings, rod ends and guiding units
-
Genuine ASCO cylinder supplied in the UAE by General Tech Services LLC
Who This Product Is Best For
-
Industrial automation and machine-building applications
-
Compact machines using 32 to 80 mm bore cylinders
-
Applications requiring smooth and consistent low-speed movement
-
Equipment where stick-slip performance is an important consideration
-
Light-assembly and inspection equipment
-
OEMs and maintenance teams sourcing ISO 15552 cylinders in the UAE
How to Install & Use It
-
Confirm the required bore, stroke, mounting arrangement and operating environment.
-
Select suitable ISO 15552 mountings, rod ends and guiding accessories.
-
Install compatible Series 494 position detectors in the barrel grooves if end-of-stroke feedback is required.
-
Connect the appropriate compressed-air supply and pneumatic controls.
-
Set the operating speed and test cylinder movement under the expected load.
-
Check the complete assembly before placing the equipment into normal operation.
Frequently Asked Questions
What is the ASCO Series 453 omega piston seal cylinder?
It is a double-acting ISO 15552 (AFNOR/DIN) profiled-barrel pneumatic cylinder available in 32 to 80 mm bores and fitted with an omega-formed piston seal.
What is an omega-formed piston seal?
It is a single-profile piston seal designed to provide sealing in both directions while maintaining a compact piston arrangement.
Is the Series 453 interchangeable with other ISO cylinders?
The Series 453 follows ISO 15552 (AFNOR/DIN) dimensions for mounting and rod-end compatibility. Confirm the exact bore, stroke, mounting and application requirements before replacement.
Can I add position sensors to the Series 453?
Yes. The profiled barrel has integrated grooves for position detectors such as ASCO Series 494.
Which bore and stroke do I need?
Bore selection depends on the required force and available working air pressure, while stroke depends on the required travel. Share the load, speed and travel requirements with General Tech Services LLC for sizing assistance.
How do I calculate the required cylinder bore?
Cylinder bore is selected according to the required force and working air pressure, with allowance for friction and dynamic loads. General Tech Services LLC can assist with the sizing calculation when you provide the application data.
Is there an alternative version with pneumatic cushioning?
The Series 453 PES-P-DM cushioned cylinder is an alternative configuration for applications requiring pneumatic cushioning. Confirm the required configuration with General Tech Services LLC.
How do I choose the Series 453 or another ISO cylinder?
Choose the cylinder based on bore, stroke, mounting dimensions, operating pressure, load, speed, environment and sensor requirements. Send your application details and cylinder code to General Tech Services LLC for compatibility confirmation.
How do I get a price and lead time?
Pricing is quote-based. Call General Tech Services LLC on +971 6 543 6933 or submit the Request a Quote form.
Is this a genuine ASCO cylinder?
General Tech Services supplies original ASCO cylinders in the UAE with technical support.
For pricing or to place an order, contact General Tech Services LLC. Call +971 6 543 6933.
