Mitutoyo 1040A | Dial Gauge | 3.5 mm, 0.01 mm, lug back
The Mitutoyo 1040A is a Series 1 dial indicator with 0.01 mm graduation and a 3.5 mm range, featuring a lug back. Genuine Mitutoyo from General Tech, authorised distributor in Kuwait.
Part No. 1040A
Call +965 9807 4888 for pricing and stock availability
Product Overview
Checking runout, flatness, height differences and alignment is faster with a clear analogue dial that shows the trend at a glance. The Mitutoyo 1040A is a Series 1 plunger-type dial indicator with 0.01 mm graduation and a 3.5 mm range.
The lug back provides a mounting lug for attaching the indicator to holders and fixtures. It follows the ISO dial standard, with the 8 mm stem used by metric indicators. It is genuine Mitutoyo, supplied through an authorised distributor.
Typical uses include runout, flatness and alignment checks on machine tools; comparator and height-gauge setups; and inspection rooms standardising on Mitutoyo indicators. Plunger dial indicators are used on stands, height gauges and comparators for runout, flatness, parallelism and height comparison against gauge blocks or master parts.
For the best accuracy, mount the indicator so the spindle is perpendicular to the measured surface, apply a small preload before zeroing, and avoid letting the spindle snap back onto the part.
Before ordering, confirm the graduation and range you need, the back type for your mounting, and whether inch or metric units suit your drawings. Our team can help you choose and arrange calibration.
Call +965 9807 4888 for pricing, stock availability and lead time.
Key Benefits
-
0.01 mm graduation, 3.5 mm range
-
Clear, easy-to-read analogue dial
-
Robust Mitutoyo Series 1 design
-
Lug back for mounting on holders
-
Ideal for runout and alignment checks
-
Genuine Mitutoyo from an authorised distributor in Kuwait
Who This Product Is Best For
-
Runout, flatness and alignment checks on machine tools
-
Comparator and height-gauge setups
-
Inspection rooms standardising on Mitutoyo indicators
How to Specify & Install It
-
Mount the indicator on a stand or holder with the spindle perpendicular to the surface.
-
Bring the contact point onto the part with a small preload.
-
Rotate the bezel to set the pointer to zero.
-
Move the part or indicator and read the deviation.
Frequently Asked Questions
What is a dial indicator used for?
A dial indicator is used for comparative measurement such as runout, flatness, parallelism and height differences against a reference.
What is the graduation and range?
The Mitutoyo 1040A has a 0.01 mm graduation and a 3.5 mm measuring range.
What is the difference between lug back and flat back?
A lug back has a mounting lug for attaching to holders, while a flat back has a smooth back for mounting by the stem.
Should I choose the 1040A or the 1041AB?
The 1041AB also has a 3.5 mm range. Match the graduation, range and mounting configuration to your application.
How should I care for a dial indicator?
Keep the spindle clean and dry, never oil it, avoid sudden impacts on the contact point, and store the indicator in its case. Regular calibration helps keep readings trustworthy.
Can the indicator be calibrated?
General Tech Kuwait provides ISO 17025 calibration support for dimensional instruments. Ask the team about calibration when you order.
Can you supply stands, holders and other Mitutoyo instruments in the same order?
Yes. General Tech carries a wide range of Mitutoyo indicators, stands, micrometers and gauges. Tell the team what you need and they can quote them together.
Is genuine Mitutoyo available in Kuwait?
Yes. General Tech is an authorised Mitutoyo distributor. Contact the team for current pricing, availability and lead time.
Call +965 9807 4888 for pricing, stock availability and product enquiries.
