Mitutoyo 2052A | Lug Back Dial Gauge | 30 mm, 0.01 mm, ISO
Part No. 2052A | Range 30 mm | Graduation 0.01 mm | Lug Back
Product Overview
The Mitutoyo 2052A is an ISO-type Series 2 plunger dial gauge with a lug back, 0.01 mm graduation and a 30 mm measuring range. Its mechanical movement is designed for dependable day-to-day measurement in inspection and workshop applications.
The 2052A is designed for long-travel measurement of heights, steps, runout and machine alignment. With 30 mm of measuring range, it can cover extended measurement travel in a single setup, reducing the need to repeatedly reset the gauge.
The lug back provides a dedicated rear mounting point for securing the gauge to a compatible bracket, fixture or machine setup. Its ISO-type design dimensions should be checked against the intended stand, holder or mounting arrangement before installation.
Need a flat-back configuration instead? See the Mitutoyo 2052AB.
Key Benefits
-
0.01 mm graduation for clear and practical readings
-
30 mm measuring range for long-travel inspection
-
ISO-type Series 2 design for compatible inspection setups
-
Lug back for secure mounting to suitable brackets and fixtures
-
Mechanical movement for dependable workshop measurement
-
Suitable for measuring heights, steps, runout and machine alignment
-
Genuine Mitutoyo part supplied by General Tech Services LLC, Kuwait
Who This Product Is Best For
-
Inspectors measuring heights, steps and runout over a longer stroke
-
Toolrooms and machine shops performing workpiece and machine alignment inspection
-
Maintenance teams replacing an existing ISO-type lug-back dial gauge
-
Inspection and calibration environments using mechanical dial gauges
-
Buyers standardizing compatible Mitutoyo inspection equipment
How to Use It
-
Mount the gauge securely using its lug back or suitable stem arrangement on a rigid bracket, stand or fixture, keeping the plunger aligned with the surface being measured.
-
Apply a small amount of pre-travel to the plunger and set the dial to zero against a reference surface or master.
-
Move the workpiece or gauge across the feature being inspected and read the deviation from the dial.
-
Retract the plunger carefully after measurement and store the gauge clean, dry and protected from damage.
Frequently Asked Questions
What is the Mitutoyo 2052A dial gauge used for?
The Mitutoyo 2052A is designed for long-travel measurement of heights, steps, runout and machine alignment. Its 30 mm range provides extended travel for inspection applications.
What are the graduation and range of the 2052A?
The 2052A has a 0.01 mm graduation and a 30 mm measuring range.
What does ISO-type mean on the Mitutoyo 2052A?
The gauge is specified as an ISO-type design rather than an ANSI/AGD-type design. The intended stand, holder or fixture should therefore be checked for compatibility before installation.
What is the benefit of a lug back?
The lug back provides a dedicated rear mounting point, allowing the gauge to be secured to a compatible bracket, fixture or machine setup.
What is the difference between the 2052A and 2052AB?
The 2052A is the lug-back version, while the 2052AB uses a flat-back configuration. Both are specified with a 0.01 mm graduation and 30 mm measuring range. The appropriate version depends on the mounting arrangement.
Is the genuine Mitutoyo 2052A available in Kuwait?
General Tech Services LLC supplies genuine Mitutoyo products in Kuwait. Call +965 9807 4888 for current pricing, lead time and availability.
Request Pricing and Availability
For pricing and current stock availability of the Mitutoyo 2052A in Kuwait, call +965 9807 4888. General Tech Services LLC can assist with product availability and configuration requirements.
