{"product_id":"mitutoyo-2118a-10-dial-gauge-lug-back-iso-type-series-2-jewelled-bearing-graduation-0-001-or-0-005-mm-range-5-mm","title":"Mitutoyo 2118A-10 | Dial Gauge | Lug Back | ISO Type | Series 2 | Jewelled Bearing | Graduation 0.001 or 0.005 mm | Range 5 mm","description":"\u003cp\u003e\u003cstrong\u003ePart No. 2118A-10 | Range 5 mm | Graduation 0.001\/0.005 mm | Lug Back | Jewelled Bearing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProduct Overview\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 2118A-10 is an ISO-type Series 2 plunger-type dial gauge with a lug back, 0.001\/0.005 mm graduation and a 5 mm measuring range. It uses jewelled bearings and is designed for high-resolution comparative inspection where very small deviations need to be detected accurately.\u003c\/p\u003e\n\u003cp\u003eMade to ISO-type design dimensions, the 2118A-10 is suitable for compatible stands, holders and fixtures used in precision inspection setups. Its 0.001\/0.005 mm graduation provides fine resolution across the 5 mm measuring range, making it suitable for checking precision-ground parts, setting gauges and comparing components against a suitable master.\u003c\/p\u003e\n\u003cp\u003eThe lug-back design provides a dedicated rear mounting point, allowing the gauge to be secured directly to a compatible bracket, fixture or machine where a stem-only mounting arrangement is not suitable. Jewelled bearings support smooth, sensitive pointer movement by reducing internal friction within the mechanical movement.\u003c\/p\u003e\n\u003cp\u003eFor applications requiring a flat-back configuration, the Mitutoyo 2118AB-10 provides the corresponding flat-back design with the same 0.001\/0.005 mm graduation and 5 mm measuring range.\u003c\/p\u003e\n\u003cp\u003eKey Benefits\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e0.001\/0.005 mm graduation for fine, high-resolution readings\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e5 mm measuring range for precision comparative inspection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eISO-type Series 2 design for compatible inspection setups\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLug back for direct mounting to suitable brackets and fixtures\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eJewelled bearings for smooth and sensitive pointer movement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePlunger-type construction for comparative measurement applications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGenuine Mitutoyo part supplied by General Tech Services LLC in Kuwait\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWho This Product Is Best For\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eQuality-control inspectors performing high-resolution comparative measurement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eToolrooms and machine shops checking precision components and workpieces\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInspection teams setting gauges or comparing components against a master\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMaintenance teams replacing an existing ISO-type lug-back dial gauge\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCalibration labs and buyers standardising precision inspection equipment around Mitutoyo products\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHow to Use It\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eMount the gauge securely using its lug back or suitable stem arrangement on a rigid bracket, stand or fixture, keeping the plunger aligned with the surface being measured.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eApply a small amount of pre-load to the plunger and rotate the bezel to establish zero against a suitable reference surface or master.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMove the workpiece or gauge across the feature being inspected and observe the dial reading to determine the deviation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRetract the plunger carefully after use and store the gauge clean, dry and protected.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFrequently Asked Questions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the Mitutoyo 2118A-10 dial gauge used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 2118A-10 is designed for high-resolution comparative inspection where very small deviations need to be measured. Its 0.001\/0.005 mm graduation and 5 mm measuring range support fine-tolerance inspection applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the graduation and measuring range of the 2118A-10?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Mitutoyo 2118A-10 has a 0.001\/0.005 mm graduation and a 5 mm measuring range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does ISO-type mean on this dial gauge?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eISO-type refers to the design standard used for the gauge's dimensions and configuration. Check that the stands, holders and fixtures in your inspection setup are compatible with this pattern.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the benefit of a lug-back design?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe lug back provides a dedicated rear mounting point, allowing the gauge to be secured directly to a suitable bracket or fixture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the benefit of jewelled bearings?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eJewelled bearings help reduce internal friction, supporting smooth and sensitive pointer movement during comparative measurement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 2118A-10 and 2118AB-10?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth models have a 0.001\/0.005 mm graduation and a 5 mm measuring range. The 2118A-10 has a lug-back design for direct mounting to suitable brackets or fixtures, while the 2118AB-10 has a flat-back design for stem mounting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the genuine Mitutoyo 2118A-10 available in Kuwait?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGeneral Tech Services LLC supplies genuine Mitutoyo products in Kuwait. For current pricing, lead time and stock availability, call \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eRequest Pricing and Availability\u003c\/p\u003e\n\u003cp\u003eFor the genuine Mitutoyo 2118A-10 dial gauge in Kuwait, contact General Tech Services LLC for current pricing, stock availability and lead-time information.\u003c\/p\u003e\n\u003cp\u003eCall \u003cstrong\u003e+965 9807 4888\u003c\/strong\u003e for pricing and stock availability.\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170901168241,"sku":"2118A-10","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-dial-indicators-default-title-mitutoyo-2118a-10-dial-gauge-lug-back-iso-type-series-2-jewelled-bearing-graduation-0-001-or-0-005-mm-range-5-mm-25383348207729.jpg?v=1761744630","url":"https:\/\/www.generaltechkuwait.com\/products\/mitutoyo-2118a-10-dial-gauge-lug-back-iso-type-series-2-jewelled-bearing-graduation-0-001-or-0-005-mm-range-5-mm","provider":"General Tech Services LLC","version":"1.0","type":"link"}