Mitutoyo 2119S-11 | Dial Indicator | Lug Back | AGD/ANSI Type | Jeweled Bearing | Graduation 0.001 mm | Range 5 mm
Part No. 2119S-11 | Range 5 mm | Graduation 0.001 mm
General Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait +965 9807 4888
Product Overview
The Mitutoyo 2119S-11 is an ANSI/AGD-type dial gauge with a lug back, 0.001 mm graduation and a 5 mm measuring range. Designed for high-resolution comparative inspection, it provides fine readings for checking small dimensional deviations, setting gauges and comparing precision components against a reference.
The ANSI/AGD design is suited to inspection environments using standard dial gauge stands, holders and fixtures. Its lug back provides a dedicated rear mounting point for attaching the gauge to a bracket or fixture where direct mounting is preferred. Jewelled bearings support smooth, sensitive pointer movement with low internal friction.
The 2119S-11 is suitable for machine shops, toolrooms, quality-control departments, maintenance teams and calibration environments requiring a fine-resolution analogue gauge for comparative measurement.
For stem mounting with a flat back, the Mitutoyo 2119AB-11 is an alternative within the same 0.001 mm graduation and 5 mm range.
Key Benefits
■ 0.001 mm graduation for fine, micron-level comparative readings
■ 5 mm measuring range for precision inspection applications
■ ANSI/AGD design for compatibility with common dial gauge stands and holders
■ Lug back for secure mounting to brackets and fixtures
■ Jewelled bearings for smooth and sensitive pointer movement
■ Analogue operation for direct visual comparison against a reference
■ Genuine Mitutoyo instrument supplied through General Tech Services LLC, Kuwait
Who This Product Is Best For
■ Quality-control inspectors requiring fine-resolution comparative measurement
■ Toolrooms and machine shops setting workpieces, fixtures and machine alignment
■ Maintenance teams replacing an existing ANSI/AGD lug-back gauge
■ Calibration and inspection departments standardising analogue gauges
■ Manufacturers checking precision-ground components and dimensional deviations
How to Use It
-
Mount the gauge securely by its lug back or stem in a rigid stand, magnetic base or suitable fixture.
-
Position the plunger squarely against the measurement surface or feature being inspected.
-
Apply a suitable amount of pre-travel and rotate the bezel to set the pointer to zero against the reference surface or master.
-
Move the workpiece or gauge across the feature while maintaining consistent contact.
-
Read the pointer deviation directly from the 0.001 mm graduated dial.
-
Retract the plunger gently after use and store the gauge clean, dry and protected.
Frequently Asked Questions
What is the Mitutoyo 2119S-11 used for?
The 2119S-11 is used for precision comparative inspection, including checking precision-ground components, setting gauges and comparing dimensional deviations against a reference. Its 0.001 mm graduation provides fine-resolution readings over a 5 mm range.
What are the graduation and range of the 2119S-11?
The Mitutoyo 2119S-11 has a 0.001 mm graduation and a 5 mm measuring range.
What does ANSI/AGD mean on a dial gauge?
ANSI/AGD refers to the American Gage Design dimensions used for dial indicators. This design allows the gauge to work with compatible standard stands, holders and mounting accessories.
What is the benefit of the lug back?
The lug back provides a dedicated rear mounting point, allowing the gauge to be secured directly to a compatible bracket, fixture or other mounting arrangement.
What is the benefit of jewelled bearings?
Jewelled bearings help reduce internal friction and support smooth, sensitive movement of the gauge mechanism during comparative measurements.
Should I choose a lug-back or flat-back 2119 gauge?
Choose the 2119S-11 when a lug-back mounting arrangement suits the bracket or fixture being used. For applications requiring stem mounting with a flat back, the 2119AB-11 and 2119A-11 are alternatives with the same 0.001 mm graduation and 5 mm range.
Is the genuine Mitutoyo 2119S-11 available in Kuwait?
General Tech Services LLC supplies genuine Mitutoyo products in Kuwait. Contact +965 9807 4888 for current pricing, lead time and availability.
Request Pricing & Availability
For the Mitutoyo 2119S-11, contact General Tech Services LLC for Kuwait pricing and availability.
Call +965 9807 4888 to request a quote.
