Mitutoyo 2952AB | Reverse Reading Dial Indicator | 30 mm Range, 0.01 mm Graduation, Flat Back
Part No. 2952AB | Range 30 mm | Graduation 0.01 mm | Flat Back | Reverse Dial Face
Product Overview
The Mitutoyo 2952AB is an ISO-type Series 2 plunger dial gauge with a flat back, reverse dial face, 0.01 mm graduation and a 30 mm measuring range. It is designed for long-travel measurement applications including heights, steps, runout and machine alignment.
Made to an ISO-type design, the 2952AB should be used with compatible stands, holders and fixtures. Its 30 mm measuring range allows longer-travel measurements to be completed in a single setup, reducing the need for repeated gauge repositioning.
The flat back provides a clean, low-profile rear configuration suitable for stem mounting in a magnetic base, comparator stand or custom fixture. The reverse dial face is suited to setups where the dial needs to be read in the opposite direction. Its mechanical movement is designed for regular measurement and inspection work.
For applications requiring a lug-back configuration, the Mitutoyo 2952A provides the corresponding lug-back design.
Key Benefits
-
0.01 mm graduation for clear and practical measurement readings
-
30 mm measuring range for long-travel inspection
-
ISO-type Series 2 design for compatible inspection setups
-
Flat back provides a clean profile for stem mounting
-
Reverse dial face for measurement setups requiring opposite-direction reading
-
Mechanical movement suited to regular workshop measurement
-
Suitable for measuring heights, steps, runout and machine alignment
-
Genuine Mitutoyo 2952AB supplied by General Tech Services LLC in Kuwait
Who This Product Is Best For
-
Inspectors measuring heights, steps and runout over a long travel
-
Toolrooms and machine shops performing workpiece and machine alignment checks
-
Maintenance teams replacing an existing ISO-type flat-back dial gauge
-
Inspection departments using magnetic bases, comparator stands or custom fixtures
-
Calibration and metrology environments using compatible Mitutoyo equipment
How to Use It
-
Mount the gauge securely by its stem in a suitable stand, magnetic base or fixture, keeping the plunger correctly aligned with the measurement surface.
-
Apply suitable preload to the plunger and rotate the bezel to establish the reference position or zero.
-
Move the workpiece or gauge across the feature being inspected and observe the pointer movement on the reverse dial face.
-
Read the deviation directly from the dial and compare it with the required measurement or tolerance.
-
Retract the plunger carefully after use and store the gauge clean, dry and protected.
Frequently Asked Questions
What is the Mitutoyo 2952AB used for?
The Mitutoyo 2952AB is designed for long-travel measurement of heights, steps, runout and machine alignment.
What are the graduation and measuring range of the 2952AB?
The 2952AB has a 0.01 mm graduation and a 30 mm measuring range.
What does ISO-type mean on the Mitutoyo 2952AB?
ISO-type identifies the dimensional design pattern of the gauge. Compatible stands, holders and fixtures should be checked before installation.
What is the benefit of the flat-back design?
The flat back provides a clean, low-profile rear configuration that is suitable for stem mounting in compatible stands, magnetic bases and fixtures.
What is the purpose of the reverse dial face?
The reverse dial face is intended for setups where the dial needs to be viewed or read in the opposite direction.
What is the difference between the 2952AB and 2952A?
The 2952AB has a flat-back design, while the 2952A has a lug-back design. Both are listed with a 0.01 mm graduation and 30 mm measuring range.
Is the genuine Mitutoyo 2952AB available in Kuwait?
General Tech Services LLC supplies genuine Mitutoyo products in Kuwait. Contact us for current availability, lead time and pricing.
Request Pricing and Availability
For genuine Mitutoyo 2952AB dial gauges in Kuwait, contact General Tech Services LLC for pricing, availability and supply information.
+965 9807 4888
