Norbar EvoTorque ET2-72 Electronic Torque Multiplier 270-1350NM, 3/4" Square Drive
The Norbar EvoTorque 2 ET2-72 is a mains-powered electronic torque tool delivering 270–1,350 N·m through a 3/4" square drive with ±3% accuracy. It features on-board data storage, USB and Bluetooth 4.0 data transfer, and multiple tightening modes. Supplied by General Tech Services LLC, UAE.
For pricing and availability, call +971 6 5436933.
Part No. ET2-72
Hand-pulling a torque wrench across a long run of high-torque bolts can be slow, tiring and difficult to repeat consistently. The Norbar EvoTorque 2 ET2-72 replaces much of that effort with a mains-powered, transducer-controlled tool designed to stop when the target torque is reached.
This model covers 270–1,350 N·m through a 3/4" square drive, making it suitable for pipe flanges, heat exchanger covers and mid-size structural connections. It is available in 110 V and 230 V versions. Specify your site's power supply when requesting a quote so the appropriate version can be selected.
The EvoTorque 2 offers Torque, Torque & Angle and Torque Audit modes. Final torque or torque-and-angle results are displayed and stored with time and date stamps, with capacity for up to 3,000 readings. Data can be transferred to a PC through USB or Bluetooth 4.0, while Norbar's EvoLog software supports tool setup and data management. The Turn Angle option helps check whether a bolt has already been tightened.
If you are comparing torque ranges, confirm the required capacity and exact model configuration with the supplier before ordering the alternative 135–1,350 N·m listing.
Key Benefits
-
±3% accuracy and repeatability on joints of 30° and above
-
Intelligent joint sensing for consistent results on hard and soft joints
-
Torque, Torque & Angle and Torque Audit operating modes
-
On-board storage for 3,000 time- and date-stamped readings
-
USB and Bluetooth 4.0 data transfer with EvoLog PC software
-
Traceable torque and angle calibration certificate supplied as standard
For pricing and availability, call +971 6 5436933.
Who This Product Is Best For
-
Maintenance and shutdown teams tightening pipe flanges
-
EPC contractors and QA managers who require stored, traceable torque records
-
Buyers who need a choice of 110 V or 230 V power supply
-
Teams performing repetitive high-torque bolting with a single operator
How to Use It
-
Fit the reaction arm and an appropriately rated impact socket of the correct size.
-
Power on the tool, select the required mode and enter the target torque and angle, if applicable.
-
Position the reaction arm against a solid adjacent reaction point, then press the trigger.
-
Allow the tool to stop at the target value. The result is stored for later export through EvoLog.
Frequently Asked Questions
1. What torque range does the ET2-72 cover?
This listing covers 270–1,350 N·m through a 3/4" square drive. Norbar calibrates the EvoTorque 2 from 20% to 100% of maximum capacity, so check your lowest required bolt torque against the calibration certificate.
2. How accurate is the EvoTorque 2?
It provides ±3% accuracy and repeatability of the set value within its calibrated range, on joints of 30° and above.
3. Can it store and export torque data?
Yes. It stores up to 3,000 time- and date-stamped readings and transfers them to a PC through USB or Bluetooth 4.0 for use with EvoLog software.
4. Which voltage should I choose?
The tool is listed in 110 V and 230 V versions. Choose the version compatible with your site's power supply and confirm the requirement when ordering.
5. How do I choose the right EvoTorque 2 model?
Choose a tool whose torque range covers your highest required bolt torque while remaining within its calibrated operating range. If you are considering the alternative 135–1,350 N·m listing, confirm its exact model and configuration with the supplier.
6. How can I get UAE pricing and lead time?
Contact General Tech Services LLC for current pricing, availability and delivery information.
Request a quote for the Norbar EvoTorque 2 ET2-72. Call +971 6 5436933.
