Norbar EvoTorque ET2-92-4000-230 Electronic Torque Multiplier 400-4000NM
The Norbar EvoTorque 2 ET2-92-4000-230 is a mains-powered electronic torque tool delivering 400–4,000 N·m through a 1" square drive with ±3% accuracy, on-board data storage and USB/Bluetooth transfer. Supplied by General Tech Services LLC, UAE.
For pricing and availability, call +971 6 5436933.
Part Number: 180228.B08
For maintenance planners, every hour of bolting adds up. The Norbar EvoTorque 2 ET2-92-4000-230 helps reduce bolting time while keeping each joint within a ±3% tolerance and maintaining a record of results.
This model covers 400–4,000 N·m on a 1" square drive, making it suitable for wind turbine towers, large flanges and heavy structural bolting. It runs on 230 V mains, the standard supply in UAE workshops, plant rooms and fabrication yards.
EvoTorque 2 offers Torque, Torque & Angle and Torque Audit modes. Final torque or torque-and-angle results are displayed and stored on the tool with time and date stamps, with capacity for up to 3,000 readings. Results can be transferred to a PC through USB or Bluetooth 4.0, while Norbar's EvoLog software supports tool setup and data management. A Turn Angle option helps check whether a bolt has already been tightened.
If your application requires a different package, compare it with the ET2-92-4000-230 supplied with a Pelicase before ordering.
Key Benefits
-
±3% accuracy: Accuracy and repeatability on joints of 30° and above, within the calibrated range.
-
Intelligent joint sensing: Supports consistent results on hard and soft joints.
-
Multiple operating modes: Torque, Torque & Angle and Torque Audit.
-
On-board data storage: Stores up to 3,000 time- and date-stamped readings.
-
Flexible data transfer: USB and Bluetooth 4.0 connectivity with EvoLog PC software.
-
Traceable calibration: Torque and angle calibration certificate supplied as standard.
For pricing and availability, call +971 6 5436933.
Who This Product Is Best For
-
Maintenance and shutdown teams bolting wind turbine towers.
-
EPC contractors and QA managers who need stored, traceable torque records.
-
Workshops and plant rooms operating on 230 V mains.
-
Industrial teams performing repetitive, high-torque bolting with a single operator.
How to Use It
-
Fit the appropriate reaction arm and an impact-rated socket of the correct size.
-
Power on the tool, select the required operating mode and enter the target torque, including the angle setting if required.
-
Position the reaction arm against a solid, suitable reaction point before operating the tool.
-
Operate the tool according to the manufacturer's instructions. It stops at the target setting and stores the result for later transfer.
-
Export recorded data using USB or Bluetooth 4.0 and manage the results through EvoLog software, where applicable.
Frequently Asked Questions
1. What torque range does the ET2-92-4000-230 cover?
This listing covers 400–4,000 N·m through a 1" square drive. Norbar calibrates EvoTorque 2 from 20% to 100% of maximum capacity, so check that your lowest required bolt torque falls within the calibrated range.
2. How accurate is EvoTorque 2?
It provides ±3% accuracy and repeatability of the set value within its calibrated range, on joints of 30° and above.
3. Can it store and export torque data?
Yes. It stores up to 3,000 time- and date-stamped readings and supports transfer by USB or Bluetooth 4.0 to EvoLog software.
4. Which voltage do I need?
This version operates on 230 V mains. Confirm the available power supply and the manufacturer's electrical requirements before connecting the tool.
5. Should I choose the ET2-92-4000-230 or a different EvoTorque 2?
Choose a tool whose torque range suits your application. If you need a different package, the ET2-92-4000-230 with Pelicase is an alternative. Contact our team to confirm the right option.
6. How do I get a UAE price and lead time?
Contact General Tech Services LLC for current pricing, availability and lead time.
Request a quote for the Norbar EvoTorque 2 ET2-92-4000-230 today. Call +971 6 5436933.
