ASCO G652AL0P20A0000, G 1/4 2780L/min Pneumatic Lubricator, 0bar to 10 bar, 652 Series
Part No. G652AL0P20A0000
The ASCO G652AL0P20A0000 is a Series 652 pneumatic lubricator with G 1/4" ports, rated from 0 to 10 bar and capable of flow rates up to 2,780 l/min. It adds a controlled oil mist to the compressed-air supply for pneumatic equipment that requires lubrication. Genuine ASCO lubricator supplied by General Tech Services LLC, UAE, with free UAE-wide shipping. Request a quote in under a minute - call +971 6 543 6933.
The ASCO G652AL0P20A0000 meters a fine oil mist into the compressed-air stream so the lubricant travels with the air to downstream moving components. This helps reduce friction and wear in equipment designed for lubricated air. The Series 652 lubricator has G 1/4" ports, a 0–10 bar working range and a maximum flow capacity of 2,780 l/min.
Typical applications include air tools and motors requiring lubricated air, older valves and cylinders designed for oiled air, and pneumatic air-preparation lines using the Series 652 range. Before installation, confirm that the downstream equipment is designed for lubricated operation, as many modern pneumatic components are pre-lubricated and may not require additional oil.
For sizing, check the required port size, working pressure and peak air demand in l/min. Selecting a lubricator with sufficient flow capacity for the application helps maintain suitable air delivery to downstream equipment.
Ready to order the ASCO G652AL0P20A0000? Speak to our team. Call +971 6 543 6933
Key Benefits
-
Controlled oil mist for equipment requiring lubricated air
-
G 1/4" ports for pneumatic installation
-
Maximum flow capacity of 2,780 l/min
-
0–10 bar working range
-
Suitable for Series 652 air-preparation systems
-
Genuine ASCO (Emerson) product and specification
-
Free UAE-wide shipping on genuine ASCO stock
Who This Product Is Best For
-
Air tools and motors that require lubricated compressed air
-
Valves and cylinders designed for oiled air
-
Pneumatic systems using Series 652 air-preparation components
-
Industrial applications where controlled downstream lubrication is required
How to Install & Use It
-
Confirm that the downstream pneumatic equipment requires or permits lubricated air.
-
Install the lubricator after the filter and regulator, with the bowl positioned vertically.
-
Fill the lubricator with suitable pneumatic oil according to the equipment requirements.
-
Set the oil delivery rate to the required level without excessive lubrication.
-
Check the oil level regularly and adjust the drip rate according to actual air demand.
-
Ensure there is adequate space around the bowl for inspection and servicing.
Frequently Asked Questions
What does the ASCO G652AL0P20A0000 do?
It adds a controlled fine oil mist to compressed air to lubricate downstream pneumatic equipment designed for lubricated operation.
What is the port size and maximum flow?
The lubricator has G 1/4" ports and a maximum flow capacity of 2,780 l/min.
What is the pressure range of the G652AL0P20A0000?
The supplied product information lists a 0–10 bar pressure range.
Do all pneumatic components need a lubricator?
No. Many modern pneumatic components are designed with lubrication provided during manufacture. If a system is operated with lubricated air, follow the equipment manufacturer's requirements and maintain consistent lubrication.
Where should the lubricator be installed?
Install it upstream of the machine or valve bank it is intended to supply, as close to the point of use as practical. Keep the bowl vertical and provide sufficient space for inspection and servicing.
How do I choose the G652AL0P20A0000 or another pneumatic lubricator?
Choose the lubricator based on port size, required flow, working pressure and downstream equipment requirements. Send your application details and lubricator part number to General Tech Services LLC for compatibility confirmation.
Can you supply matching ASCO parts in the same order?
General Tech Services supplies ASCO cylinders, guiding units, air preparation units, manual valves, sensors and quick exhaust valves. Contact the team with your application requirements for compatible parts.
How do I get a price and lead time?
Pricing is quote-based. Call General Tech Services LLC on +971 6 543 6933 or submit the Request a Quote form.
Is this a genuine ASCO lubricator?
General Tech Services supplies original ASCO air-preparation products in the UAE with technical support.
For pricing or to place an order, contact General Tech Services LLC. Call +971 6 543 6933.
