ASCO P494A0021300A00, Cable Pneumatic Position Detector, IP67, 5V ac/dc, Electric Operation, 494, with LED indicator
Part No. P494A0021300A00
The ASCO P494A0021300A00 is a Series 494 cable-connected position detector for pneumatic cylinders, featuring an integral cable, LED indicator and IP67 protection. The store listing specifies 5 V AC/DC electrical operation. Genuine ASCO detector, supplied in the UAE by General Tech Services LLC. Pricing is quote-based. Request a quote in under a minute - call +971 6 543 6933.
The ASCO P494A0021300A00 uses magnetic sensing to detect the magnet on a cylinder piston through the cylinder barrel without physical contact. Its integral cable provides a pre-wired connection, making it suitable for installations where a separate connector or cordset is not preferred.
The detector includes an LED indicator for quick setup and position verification. It is sealed to IP67 and designed for cylinders and actuators with T-profile grooves. Some cylinder configurations may require a separate mounting kit.
The store listing specifies 5 V AC/DC electrical operation. Because electrical specifications and cable configurations can vary across Series 494 detector codes, confirm the control voltage and connection requirements before ordering. Send the cylinder series and bore to General Tech Services LLC so compatibility can be checked before dispatch.
Ready to order the ASCO P494A0021300A00? Speak to our team. Call +971 6 543 6933
Key Benefits
-
Integral pre-wired cable for straightforward installation
-
LED indicator for quick setup and position verification
-
IP67 protection for suitable industrial environments
-
Non-contact magnetic cylinder position sensing
-
Designed for cylinders with T-profile grooves
-
Suitable where a separate plug-in connector is not preferred
-
Mounting kit can be confirmed according to cylinder configuration
-
Genuine ASCO detector supplied by General Tech Services LLC in the UAE
Who This Product Is Best For
-
Machines where connectors are undesirable or installation space is limited
-
Retrofits replacing compatible cable-connected cylinder sensors
-
Control panels using local junction boxes
-
Installers who prefer pre-wired position detectors
-
Pneumatic automation systems requiring cylinder position feedback
How to Install & Use It
-
Confirm the cylinder groove type, control voltage and controller requirements before installation.
-
Slide the detector into the T-profile groove or use the appropriate mounting kit where required.
-
Route the integral cable to the PLC, relay or junction box and make the electrical connection according to the applicable wiring requirements.
-
Move the cylinder to the required end position and adjust the detector until the LED switches reliably.
-
Lock the detector in position and verify reliable switching through the cylinder stroke.
Frequently Asked Questions
What is the ASCO P494A0021300A00?
It is a Series 494 cable-connected cylinder position detector with an integral cable, LED indicator and IP67 protection.
What voltage does the P494A0021300A00 use?
The store listing specifies 5 V AC/DC electrical operation. Confirm your control voltage with General Tech Services LLC before ordering.
How does the P494A0021300A00 detect cylinder position?
It detects the magnet on the cylinder piston through the cylinder barrel without physical contact.
How is the detector mounted?
It is designed for cylinders with T-profile grooves. Some cylinder configurations may require a separate mounting kit, so provide the cylinder details for compatibility confirmation.
What is the benefit of the cable-connected version?
The integral cable provides a pre-wired connection, which can simplify installation where a separate connector or cordset is not preferred.
How many detectors does one cylinder need?
The number depends on the machine's control requirements. Two detectors are commonly used for retracted and extended positions, while some machines may use an additional detector for an intermediate position.
How do I choose the P494A0021300A00 or another Series 494 detector?
Choose the detector based on the cylinder groove profile, control voltage, controller requirements and electrical connection. Send your cylinder details and detector part number to General Tech Services LLC for compatibility confirmation.
How do I get a price and lead time?
Pricing is quote-based. Call General Tech Services LLC on +971 6 543 6933 or submit the Request a Quote form.
Is this a genuine ASCO detector?
General Tech Services supplies original ASCO detectors in the UAE with technical support.
For pricing or to place an order, contact General Tech Services LLC. Call +971 6 543 6933.
