Mitutoyo 1168A | Dial Gauge | ANSI/AGD Type | Series 1 | Back Plunger Design | Reverse Dial Face | Graduation 0.001inch | Range 0.2inch
Part No. 1168A | Range 0.2 inch | Graduation 0.001 inch
General Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait +965 9807 4888
Product Overview
The Mitutoyo 1168A is an ANSI/AGD-type Series 1 dial gauge with a back plunger, reverse dial face, 0.001 inch graduation and 0.2 inch measuring range. It is designed for routine comparative inspection, runout checks and set-up work where compact travel and clear analogue readings are required.
The back plunger places the measuring plunger at the rear of the gauge, perpendicular to the dial face. This configuration is useful for mounting in confined spaces while keeping the dial visible to the operator. The reverse dial face supports set-ups that require the dial reading in the opposite direction.
With its ANSI/AGD design, the 1168A is suited to inspection stands, fixtures and holders based on common American Gage Design dimensions. Its mechanical movement provides a practical solution for day-to-day workshop measurement.
Key Benefits
-
0.001 inch graduation for clear, practical readings
-
0.2 inch measuring range for routine comparative inspection and set-up work
-
ANSI/AGD Series 1 design for compatibility with common gauge mounting equipment
-
Back plunger configuration for confined-space applications
-
Reverse dial face for opposite-direction reading requirements
-
Mechanical movement for routine workshop use
-
Genuine Mitutoyo instrument supplied and supported locally in Kuwait
Who This Product Is Best For
-
Machinists and inspectors performing comparative measurements, runout checks and machine set-ups
-
Engineers mounting dial gauges where rear-plunger access is advantageous
-
Maintenance teams replacing an existing ANSI/AGD back plunger gauge
-
Inspection departments standardising analogue gauges across workshop equipment
-
Calibration and quality-control teams requiring a compact 0.2 inch range
How to Use It
-
Secure the gauge in a suitable holder, stand or fixture with the plunger correctly aligned to the measurement surface.
-
Apply a small preload and position the gauge against the reference surface or master.
-
Rotate the bezel to establish the required zero position.
-
Move the workpiece or gauge across the feature and observe the deviation on the reverse dial face.
-
Retract the plunger carefully after measurement and store the gauge clean, dry and protected.
Frequently Asked Questions
What is the Mitutoyo 1168A used for?
The 1168A is designed for routine comparative checks, runout inspection and machine or fixture set-up work. Its 0.001 inch graduation and 0.2 inch range provide practical resolution for general workshop inspection.
What are the graduation and measuring range of the 1168A?
The Mitutoyo 1168A has a 0.001 inch graduation and a 0.2 inch measuring range.
What does ANSI/AGD mean?
ANSI/AGD refers to American Gage Design dimensions used for dial indicators. This standardisation helps gauges fit common stands, holders and inspection fixtures designed for compatible dimensions.
What is a back plunger dial gauge?
A back plunger dial gauge has its measuring plunger positioned at the rear of the gauge, perpendicular to the dial face. This arrangement can make the gauge easier to install where a conventional front-plunger configuration is difficult to position.
What is the purpose of the reverse dial face?
The reverse dial face is intended for applications where the operator needs the dial reading presented in the opposite direction. This can be useful for specific inspection and set-up orientations.
What is the difference between the 1168A and 1167A?
The supplied product information lists both models with a 0.001 inch graduation and 0.2 inch range. Confirm the exact configuration required before ordering, particularly when replacing an existing gauge.
Is the genuine Mitutoyo 1168A available in Kuwait?
Contact General Tech Services LLC at +965 9807 4888 for current pricing, lead time and availability.
Request pricing and availability from General Tech Services LLC, Kuwait. Call +965 9807 4888 for assistance with the Mitutoyo 1168A.
