Mitutoyo 2900SB-72 | Dial Indicator | Lug Back | One Revolution | Series 2 | One Revolution | Graduation 0.001mm | Range 0.08 mm
Part No. 2900SB-72 | Range 0.08 mm | Graduation 0.001 mm
General Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait +965 9807 4888
Product Overview
The Mitutoyo 2900SB-72 is a Series 2 dial gauge with a lug back, one-revolution dial, 0.001 mm graduation and 0.08 mm measuring range. It is designed for high-resolution comparative inspection where very small deviations need to be detected clearly and consistently.
The plunger-type design provides 0.001 mm graduation across 0.08 mm of travel, making it suitable for precision comparative checks, gauge setting and comparing components against a reference master.
The lug back provides a dedicated rear mounting point for fastening the gauge to a suitable bracket, fixture or machine where direct mounting is preferred. Its one-revolution dial displays the complete 0.08 mm measuring range within a single pointer revolution, simplifying readings during repetitive inspection work.
The mechanical movement is suited to routine inspection and workshop applications. The 2900A-70 is another listed version with the same 0.001 mm graduation and 0.08 mm range; confirm the exact configuration required for your existing setup before ordering.
Key Benefits
-
0.001 mm graduation for fine, high-resolution comparative readings
-
0.08 mm measuring range for precision inspection
-
Series 2 design for high-resolution comparative measurement
-
Lug back for mounting to suitable brackets and fixtures
-
One-revolution dial displays the complete range in a single turn
-
Mechanical movement for routine inspection and workshop use
-
Genuine Mitutoyo product supplied and supported locally in Kuwait
Who This Product Is Best For
-
Quality-control inspectors performing high-resolution comparative measurements
-
Toolrooms and machine shops checking workpieces, fixtures and machine alignment
-
Maintenance teams replacing an existing lug-back dial gauge
-
Calibration and inspection laboratories
-
Buyers standardizing precision inspection equipment on Mitutoyo
How to Use It
-
Mount the gauge securely using its lug back or suitable stem arrangement on a rigid bracket, stand or fixture.
-
Position the plunger squarely against the surface or feature being measured.
-
Apply a small preload and set the dial to zero against the reference surface or master.
-
Move the workpiece or gauge across the feature and observe the pointer deviation.
-
Record the measurement and avoid exceeding the 0.08 mm measuring range.
-
Retract the plunger gently after use and store the gauge clean, dry and protected.
Frequently Asked Questions
What is the Mitutoyo 2900SB-72 used for?
The Mitutoyo 2900SB-72 is used for high-resolution comparative inspection where very small dimensional deviations need to be identified. Its 0.001 mm graduation and 0.08 mm range suit fine-tolerance measurement work.
What are the graduation and range of the 2900SB-72?
The 2900SB-72 has a 0.001 mm graduation and a 0.08 mm measuring range.
What series is the Mitutoyo 2900SB-72?
The 2900SB-72 is a Mitutoyo Series 2 dial gauge. Confirm compatibility with the intended holders, stands and fixtures before installation.
What is the benefit of a lug back?
The lug back provides a dedicated mounting point that allows the gauge to be fastened to a suitable bracket, fixture or machine where lug mounting is preferred.
What does a one-revolution dial mean?
The pointer covers the complete 0.08 mm measuring range within one revolution. This simplifies reading because the user does not need to track multiple pointer revolutions.
What is the difference between the 2900SB-72 and 2900A-70?
Both are listed with a 0.001 mm graduation, 0.08 mm range and lug-back design. Confirm the exact configuration against your existing gauge, holder or fixture before ordering.
Is the genuine Mitutoyo 2900SB-72 available in Kuwait?
Contact General Tech Services LLC for current stock status, lead time and pricing for the genuine Mitutoyo 2900SB-72 in Kuwait.
For pricing, stock availability or application assistance, call +965 9807 4888.
