Mitutoyo 2905A-10 | Reverse Reading Dial Indicator | 0.05 in Range, 0.0001 in Graduation, Lug Back
Part No. 2905A-10 | Range 0.05 inch | Graduation 0.0001 inch | Lug Back | Reverse Dial Face | Jewelled Bearing
Product Overview
The Mitutoyo 2905A-10 is an ANSI/AGD-type Series 2 plunger dial gauge with a lug back, reverse dial face, 0.0001 inch graduation, 0.05 inch measuring range and jewelled bearings. It is designed for high-resolution comparative inspection where very small dimensional deviations need to be detected.
The gauge follows American Gage Design dimensions for use with compatible stands, fixtures and holders. Its lug back provides a dedicated rear mounting point for securing the gauge to a suitable bracket or fixture. The reverse dial face is suited to setups where the dial needs to be read in the opposite direction, while the jewelled bearing arrangement supports smooth and sensitive pointer movement.
For a flat-back configuration, see the Mitutoyo 2905AB-10.
Key Benefits
-
0.0001 inch graduation for fine, high-resolution readings
-
0.05 inch measuring range for precision comparative inspection
-
ANSI/AGD-type Series 2 design for compatible inspection setups
-
Lug back for mounting to suitable brackets and fixtures
-
Reverse dial face for opposite-direction reading setups
-
Jewelled bearings for smooth and sensitive pointer movement
-
Plunger-type construction for comparative dimensional measurement
-
Genuine Mitutoyo product supplied by General Tech Services LLC, Kuwait
Who This Product Is Best For
-
Quality-control inspectors performing high-resolution comparative measurements
-
Toolrooms and machine shops checking precision-ground components
-
Inspection teams working with setups that require reverse dial-face reading
-
Maintenance teams replacing an existing ANSI/AGD lug-back dial gauge
-
Calibration and metrology environments requiring fine-resolution measurement
How to Use It
-
Mount the gauge using the lug back or suitable stem arrangement on a rigid bracket or fixture.
-
Position the plunger squarely against the surface or feature being measured.
-
Apply a small amount of pre-travel and rotate the bezel to establish zero against a reference surface or master.
-
Move the workpiece or gauge across the feature and observe the reverse dial reading to determine the deviation.
-
Retract the plunger carefully after measurement and store the gauge clean, dry and protected.
Frequently Asked Questions
What is the Mitutoyo 2905A-10 dial gauge used for?
The Mitutoyo 2905A-10 is designed for high-resolution comparative inspection where very small dimensional deviations need to be detected. Its 0.0001 inch graduation and 0.05 inch range support fine-tolerance comparative measurement.
What are the graduation and range of the 2905A-10?
The 2905A-10 has a 0.0001 inch graduation and a 0.05 inch measuring range.
What does ANSI/AGD mean on the Mitutoyo 2905A-10?
ANSI/AGD refers to the American Gage Design standard used for compatible dial-indicator dimensions. Check that the intended stand, holder or fixture is suitable for this design.
What is the benefit of a lug back?
The lug back provides a dedicated rear mounting point that allows the gauge to be secured to a suitable bracket, fixture or inspection setup.
What is the purpose of the reverse dial face?
The reverse dial face provides an opposite-direction dial reading arrangement for inspection setups where this orientation is required.
What is the benefit of the jewelled bearing?
The jewelled bearing arrangement supports smooth, sensitive pointer movement by reducing friction within the mechanical movement.
Should I choose the lug-back 2905A-10 or the flat-back 2905AB-10?
Both models have a 0.0001 inch graduation and 0.05 inch measuring range. The 2905A-10 has a lug back, while the 2905AB-10 has a flat back. Select the configuration that matches your mounting arrangement.
Is the genuine Mitutoyo 2905A-10 available in Kuwait?
General Tech Services LLC supplies genuine Mitutoyo products in Kuwait. Call +965 9807 4888 for current pricing, lead time and stock availability.
Request Pricing and Availability
For pricing, lead time and current stock availability of the Mitutoyo 2905A-10, call +965 9807 4888. General Tech Services LLC supplies genuine Mitutoyo measurement equipment in Kuwait.
