Mitutoyo 2929AB-60 | Dial Gauge | Flat Back | ISO Type | Series 2 | One Revolution | Graduation 0.01mm | Range 0.8 mm
Part No. 2929AB-60 | Range 0.8 mm | Graduation 0.01 mm
General Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait +965 9807 4888
Product Overview
The Mitutoyo 2929AB-60 is an ISO-type Series 2 dial gauge with a flat back, one-revolution dial, 0.01 mm graduation and 0.8 mm measuring range. It is designed for routine comparative inspection, runout checks and setup work where practical resolution and compact travel are required.
The plunger-type gauge follows ISO-type design dimensions, so the intended stands, holders and fixtures should be checked for compatibility before installation. Its 0.01 mm graduation across 0.8 mm of travel provides clear readings for everyday inspection tasks where a longer measuring stroke is not required.
The flat back provides a clean, compact rear profile for stem mounting in magnetic bases, comparator stands and suitable fixtures. Its one-revolution dial displays the complete 0.8 mm measuring range within a single pointer revolution, simplifying readings during repetitive inspection and setup work.
The mechanical movement is suited to dependable day-to-day workshop use. For the same 0.01 mm graduation and 0.8 mm range with a lug-back configuration, the Mitutoyo 2929A-60 provides an alternative mounting design.
Key Benefits
-
0.01 mm graduation for clear, practical comparative readings
-
0.8 mm measuring range for routine inspection and setup work
-
ISO-type Series 2 design for compatible inspection setups
-
Flat back configuration for stem mounting
-
One-revolution dial displays the complete range in a single turn
-
Mechanical movement for routine workshop use
-
Genuine Mitutoyo product supplied and supported locally in Kuwait
Who This Product Is Best For
-
Machinists and inspectors performing routine comparative checks
-
Toolrooms and machine shops setting up workpieces and fixtures
-
Maintenance teams replacing an existing ISO-type flat-back dial gauge
-
Calibration and inspection laboratories
-
Buyers standardizing inspection equipment on Mitutoyo
How to Use It
-
Mount the gauge securely by its stem in a suitable rigid stand, magnetic base or fixture.
-
Position the plunger squarely against the surface or feature being measured.
-
Apply a small preload and set the dial to zero against the reference surface or master.
-
Move the workpiece or gauge across the feature and observe the pointer deviation.
-
Record the measurement and avoid exceeding the 0.8 mm measuring range.
-
Retract the plunger gently after use and store the gauge clean, dry and protected.
Frequently Asked Questions
What is the Mitutoyo 2929AB-60 used for?
The Mitutoyo 2929AB-60 is used for routine comparative checks, runout inspection and setup work on the shop floor. Its 0.01 mm graduation and 0.8 mm range provide practical resolution for general inspection tasks.
What are the graduation and range of the 2929AB-60?
The 2929AB-60 has a 0.01 mm graduation and a 0.8 mm measuring range.
What does ISO type mean on the Mitutoyo 2929AB-60?
ISO type indicates that the dial gauge follows an ISO-type design pattern rather than an ANSI/AGD pattern. Check that the intended stands, holders and fixtures are compatible with this design.
What is the benefit of the flat back?
The flat back provides a clean, compact rear profile that suits stem mounting in inspection stands, magnetic bases and suitable fixtures.
What does a one-revolution dial mean?
The pointer covers the complete 0.8 mm measuring range within one revolution. This simplifies reading because the user does not need to track multiple pointer revolutions.
What is the difference between the 2929AB-60 and 2929A-60?
Both models have a 0.01 mm graduation and 0.8 mm measuring range. The 2929AB-60 has a flat back, while the 2929A-60 has a lug back. The appropriate configuration depends on the mounting arrangement of the inspection setup.
Is the genuine Mitutoyo 2929AB-60 available in Kuwait?
Contact General Tech Services LLC for current stock status, lead time and pricing for the genuine Mitutoyo 2929AB-60 in Kuwait.
For pricing, stock availability or application assistance, call +965 9807 4888.
