Mitutoyo 2959AB | Dial Gauge | Flat Back | ISO Type | Series 2 | One Revolution | Graduation 0.01mm | Range 1.6 mm
Part No. 2959AB | Range 1.6 mm | Graduation 0.01 mm
General Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait +965 9807 4888
Product Overview
The Mitutoyo 2959AB is an ISO-type Series 2 dial gauge with a flat back design, 0.01 mm graduation, 1.6 mm measuring range and one-revolution dial. It is designed for routine comparative inspection, runout checks and machine or workpiece setup where compact travel and clear readings are required.
The plunger-type gauge follows an ISO-type design, so compatible stands, holders and fixtures should be confirmed before installation. Its 0.01 mm graduation provides practical resolution across the 1.6 mm measuring range, making it suitable for general shop-floor inspection without requiring a long-stroke gauge.
The flat back provides a clean rear profile for stem-mounted applications using suitable magnetic bases, comparator stands or custom fixtures. The one-revolution dial displays the complete 1.6 mm measuring range within a single pointer revolution, helping simplify readings and reducing the possibility of revolution-counting errors.
Key Benefits
-
0.01 mm graduation for clear, practical readings
-
1.6 mm measuring range for routine comparative inspection and setup
-
ISO-type design for compatible inspection setups
-
Flat back for stem mounting in suitable stands, bases and fixtures
-
One-revolution dial for reading the full measuring range in a single turn
-
Series 2 configuration for compact comparative measurement
-
Genuine Mitutoyo part supplied by General Tech Services LLC in Kuwait
Who This Product Is Best For
-
Machinists and inspectors performing routine comparative checks and setup work
-
Toolrooms and machine shops checking workpieces, fixtures and machine alignment
-
Maintenance teams replacing an existing ISO-type flat back dial gauge
-
Calibration and quality-control teams standardising inspection equipment on Mitutoyo
How to Use It
-
Mount the gauge securely by its stem in a compatible rigid stand, magnetic base or fixture, with the plunger correctly aligned to the measuring surface.
-
Pre-load the plunger slightly against the reference surface or master and rotate the bezel to establish the required zero position.
-
Move the workpiece or gauge across the feature being inspected and read the deviation directly from the dial.
-
Keep the plunger movement within the 1.6 mm measuring range and avoid excessive measuring force.
-
Retract the plunger gently after use and store the gauge clean, dry and protected.
Frequently Asked Questions
What is the Mitutoyo 2959AB dial gauge used for?
The Mitutoyo 2959AB is designed for routine comparative checks, runout inspection and setup work. Its 0.01 mm graduation and 1.6 mm measuring range suit general shop-floor measurement tasks.
What are the graduation and range of the 2959AB?
The Mitutoyo 2959AB has a 0.01 mm graduation and a 1.6 mm measuring range.
What does ISO-type mean on the Mitutoyo 2959AB?
ISO-type indicates that the gauge follows an ISO-type design rather than an ANSI/AGD pattern. Check that your existing stands, holders and fixtures are compatible with this design before installation.
What is the benefit of a flat back?
The flat back provides a clean, compact rear profile for applications where the gauge is mounted by its stem in a suitable stand, magnetic base or fixture.
What does a one-revolution dial mean?
The pointer covers the full 1.6 mm measuring range in a single revolution. This provides a direct reading of the complete range without needing to track multiple pointer revolutions.
What is the difference between the 2959AB and 2901AB-10?
The 2959AB is listed with a 0.01 mm graduation and 1.6 mm measuring range, while the 2901AB-10 is listed with a 0.001 mm graduation and 0.16 mm range. The appropriate model depends on the required resolution and measuring travel.
Is the genuine Mitutoyo 2959AB available in Kuwait?
Contact General Tech Services LLC at +965 9807 4888 for current pricing, lead time and availability in Kuwait.
Request Pricing & Availability
For the genuine Mitutoyo 2959AB in Kuwait, contact General Tech Services LLC at +965 9807 4888 to request pricing and current availability.
