Mitutoyo 3047A | Dial Gauge | Lug Back | ISO Type | Series 3 | Graduation 0.01 mm | Range 10 mm
Part No. 3047A | Range 10 mm | Graduation 0.01 mm
General Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait +965 9807 4888
Product Overview
The Mitutoyo 3047A is an ISO-type Series 3 dial gauge with a lug back design, 0.01 mm graduation and a 10 mm measuring range. It is designed for long-travel comparative measurement of heights, steps, runout and machine alignment.
The plunger-type gauge follows ISO-type design dimensions, so stands and holders should be checked for compatibility. Its 10 mm travel allows longer measurements in a single set-up, reducing the need to repeatedly reposition the gauge.
The lug back provides a fixed rear mounting point for attachment to suitable brackets, fixtures or machine setups. Its mechanical movement is suited to routine inspection and workshop measurement applications.
For a flat back version with the same 0.01 mm graduation and 10 mm range, see the Mitutoyo 3047SB.
Key Benefits
■ 0.01 mm graduation for clear comparative readings
■ 10 mm measuring range for long-travel inspection
■ ISO-type design for compatible inspection setups
■ Lug back for secure mounting to suitable brackets and fixtures
■ Series 3 configuration for longer-travel measurement applications
■ Mechanical movement for routine workshop use
■ Genuine Mitutoyo product supplied locally in Kuwait
Who This Product Is Best For
■ Inspectors measuring heights, steps, runout and alignment over a longer stroke
■ Toolrooms and machine shops setting up workpieces, fixtures and machinery
■ Maintenance teams replacing an existing ISO-type lug back dial gauge
■ Calibration and quality-control teams standardising inspection equipment on Mitutoyo
How to Use It
-
Mount the gauge using the lug back or stem on a rigid bracket, fixture or suitable stand, keeping the plunger square to the measurement surface.
-
Apply a small amount of preload and rotate the bezel to set the reference reading to zero.
-
Move the workpiece or gauge across the feature being inspected and observe the pointer movement to determine the deviation.
-
Retract the plunger carefully after measurement and store the gauge clean, dry and protected.
Frequently Asked Questions
What is the Mitutoyo 3047A dial gauge used for?
The 3047A is designed for long-travel comparative measurement of heights, steps, runout and machine alignment. Its 0.01 mm graduation and 10 mm range provide useful travel for these inspection tasks.
What are the graduation and range of the 3047A?
The Mitutoyo 3047A has a 0.01 mm graduation and a 10 mm measuring range.
What does ISO type mean on this dial gauge?
The 3047A is listed as an ISO-type dial gauge rather than an ANSI/AGD-type gauge. Check that the stands, holders and mounting accessories used with your setup are suitable for the ISO-type pattern.
What is the benefit of the lug back?
The lug back provides a dedicated rear mounting point, allowing the gauge to be secured to a suitable bracket or fixture.
Should I choose the 3047A lug back or the 3047SB flat back?
Both models are listed with a 0.01 mm graduation and 10 mm range. The 3047A has a lug back, while the 3047SB has a flat back, so the appropriate version depends on the mounting arrangement of your inspection setup.
Is the genuine Mitutoyo 3047A available in Kuwait?
Contact General Tech Services LLC at +965 9807 4888 for current pricing, lead time and availability in Kuwait.
Request Pricing & Availability
For genuine Mitutoyo 3047A dial gauges in Kuwait, contact General Tech Services LLC at +965 9807 4888 for pricing, availability and ordering assistance.
