Mitutoyo 505-732 Dial Caliper, Range 0-150mm
Part No. 505-732 | Range 0–150 mm | Graduation 0.01 mm | 1 mm/rev
General Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait +965 9807 4888
Product Overview
The Mitutoyo 505-732 dial caliper measures outside, inside, depth and step dimensions across a 0–150 mm range with a clear, easy-to-read analogue dial and 0.01 mm graduation. It requires no batteries or electronic display, making it ready for everyday dimensional inspection.
The caliper is constructed from hardened stainless steel, with an ultra-smooth sliding mechanism and strong shock protection for dependable workshop use. Titanium coating on the sliding surfaces helps improve durability, while the bright yellow dial with large characters makes readings easier to see.
Standard outside and inside jaws, a depth bar and step-measuring capability allow the Mitutoyo 505-732 to handle a wide range of routine dimensional checks. The dial provides 0.01 mm graduation with 1 mm per revolution.
It is suitable for QC inspectors, calibration laboratories, machinists, fitters, maintenance teams, and fabrication and machining workshops supporting Kuwait's oil, gas and utilities sectors.
Temperature can affect close-tolerance measurements. Steel expands by approximately 11.5 μm per metre per °C. At 150 mm, a 10 °C temperature difference can produce approximately 17.2 μm of dimensional change. For critical measurements, allow the workpiece and caliper to reach the same temperature before taking the final reading.
For applications requiring a longer measuring range, consider the Mitutoyo 505-682 with a 0–200 mm range.
Key Benefits
-
0.01 mm graduation for detailed dimensional inspection
-
1 mm dial travel per revolution
-
Clear analogue dial with no batteries or electronic display
-
Outside, inside, depth and step measurement in one instrument
-
Ultra-smooth sliding for comfortable everyday operation
-
Shock-protected dial mechanism for demanding workshop environments
-
Titanium-coated sliding surfaces for improved durability
-
Hardened stainless steel construction
-
Bright yellow dial with large, easy-to-read characters
-
Battery-free operation for dependable workshop availability
-
Mitutoyo 505 series design for general-purpose dimensional inspection
Who This Product Is Best For
-
Machinists and fitters requiring a reliable everyday caliper
-
QC inspectors who prefer an analogue dial reading
-
Calibration laboratories requiring a mechanical measuring instrument
-
Maintenance teams in oil and gas workshops
-
Fabrication and machining workshops
-
Utilities and industrial maintenance teams
-
Training centres, technical institutes and apprentices
-
Buyers looking for a battery-free alternative to digital calipers
How to Measure
-
Clean the measuring jaws and workpiece before starting.
-
Close the jaws gently and check that the dial is correctly zeroed.
-
Open the jaws and position them around the feature being measured.
-
Keep the caliper square and properly aligned with the measurement surface.
-
Close the jaws gently without excessive measuring force.
-
Read the whole-unit value from the main scale and add the dial reading.
-
For depth measurements, position the depth bar correctly against the reference surface.
-
After use, wipe the measuring faces clean and store the caliper safely in its case.
Frequently Asked Questions
What range does the Mitutoyo 505-732 dial caliper measure?
It measures dimensions from 0 to 150 mm.
Can the Mitutoyo 505-732 measure inside and depth dimensions?
Yes. It provides outside, inside, depth and step measurement capability.
What is the graduation of the Mitutoyo 505-732?
The graduation is 0.01 mm, with 1 mm of dial travel per revolution.
Why choose a dial caliper over a digital caliper?
The 505-732 requires no batteries and has no electronic display. Its analogue dial provides a direct mechanical reading for routine dimensional checks.
How do I read the dial on the 505-732?
Read the whole-unit measurement from the main beam scale and then add the corresponding dial reading. The 505-732 has 0.01 mm graduation.
How should I choose between the Mitutoyo 505-730 and 505-732?
Both models have a 0–150 mm range. The 505-730 has 0.02 mm graduation and 2 mm per revolution, while the 505-732 has finer 0.01 mm graduation and 1 mm per revolution.
Is the Mitutoyo 505-732 suitable for close-tolerance inspection?
Its 0.01 mm graduation provides a finer dial reading than a 0.02 mm model. For critical dimensional inspection, the instrument should be used within its applicable accuracy and calibration requirements.
Can the Mitutoyo 505-732 be recalibrated?
Yes. Periodic calibration through a qualified calibration service can help maintain measurement traceability where required by the user's quality system.
How should I store and care for the 505-732?
Wipe the measuring faces clean after use, store the instrument in its case away from direct sunlight and coolant, and avoid dropping or impacting it. Check the zero position regularly and arrange periodic calibration when traceability is required.
How do I order the Mitutoyo 505-732 dial caliper in Kuwait?
For pricing and availability, call or WhatsApp +965 9807 4888 with the model number and required quantity. General Tech Services LLC can confirm the current quotation and availability for Kuwait.
Request Pricing & Availability
Ready to order the Mitutoyo 505-732? Call or WhatsApp +965 9807 4888 for pricing and availability in Kuwait.
