Mitutoyo 505-747 | Dial Caliper | Series 505 | OD Carbide Tipped Jaws | Graduation 0.001 Inch | Accuracy ±0.002 Inch | Range 0 to 12 Inch | Weight 370 g
Part No. 505-747 | Range 0"–12" (0–304.8 mm) | Graduation 0.001" | Accuracy ±0.002"
General Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait +965 9807 4888
Product Overview
The Mitutoyo 505-747 dial caliper measures outside, inside, depth and step dimensions across a 0"–12" (0–304.8 mm) range. Its easy-to-read analogue dial provides 0.001" graduation, while the outside measuring jaws are carbide-tipped for improved wear resistance during repeated inspection.
The mechanical dial requires no battery or electronic display, providing a straightforward analogue reading for routine workshop measurements. The caliper has a stated accuracy of ±0.002" and weighs approximately 370 g.
Standard outside and inside jaws, a depth bar and step measurement capability allow the 505-747 to handle a broad range of everyday dimensional checks. It is suitable for machinists, QC inspectors, maintenance teams, power and desalination plant service teams, and oil and gas contractors across Kuwait.
For consistent precision, allow the Mitutoyo 505-747 and workpiece to reach the same temperature before measurement. Steel expands by approximately 11.5 μm per metre for every 1 °C change. At 304.8 mm, a 10 °C temperature difference can produce roughly 35.1 μm of dimensional change.
For another 0"–12" configuration, see the Mitutoyo 505-748.
Key Benefits
-
Outside, inside, depth and step measurement in one tool
-
OD carbide-tipped jaws designed to resist wear
-
0.001" graduation for fine dimensional readings
-
±0.002" stated accuracy
-
Clear analogue dial with no batteries or electronic display
-
Hardened stainless steel construction for workshop durability
-
Approximately 370 g weight for convenient handling
-
Mitutoyo 505 series design for everyday dimensional inspection
Who This Product Is Best For
-
Machinists and fitters requiring an everyday mechanical caliper
-
QC inspectors who prefer analogue measurement
-
Maintenance teams in machine shops and industrial facilities
-
Power and desalination plant maintenance teams
-
Oil and gas service contractors
-
Training centres and apprentices learning mechanical measurement
-
Buyers requiring carbide-tipped outside jaws for repeated dimensional inspection
How to Use the Dial Caliper
-
Clean the measuring faces and close the jaws gently.
-
Check the dial zero before beginning the measurement.
-
Open the jaws beyond the feature being measured.
-
Position the appropriate jaws against the workpiece.
-
Keep the caliper square and properly aligned with the part.
-
Close the jaws gently without excessive measuring force.
-
Read the whole-unit measurement from the main scale and the fractional measurement from the dial.
-
Use the depth bar for depth measurements and the step surfaces for step dimensions.
Frequently Asked Questions
What range does the Mitutoyo 505-747 measure?
It measures from 0"–12" (0–304.8 mm).
What are the graduation and accuracy?
The 505-747 has a 0.001" graduation and stated accuracy of ±0.002".
Can it measure inside and depth dimensions?
Yes. The caliper measures outside, inside, depth and step dimensions.
What are carbide-tipped jaws for?
The carbide tips on the outside measuring jaws are designed to resist wear from abrasive or hardened materials, helping maintain the condition of the measuring faces during repeated use.
Why choose a dial caliper instead of a digital caliper?
The 505-747 uses a mechanical analogue dial and does not require batteries or an electronic display. This can be useful in workshop environments where a mechanical measuring instrument is preferred.
Which Mitutoyo model should I choose if my required range differs?
Choose a caliper whose measuring range covers the required dimension. The 505-747 covers 0"–12"; other 505 series models can be selected according to jaw configuration, graduation and application requirements.
Can the Mitutoyo 505-747 be recalibrated?
Yes. Periodic calibration through an ISO/IEC 17025-accredited calibration service can help maintain measurement traceability.
How should I store and care for the caliper?
Wipe the measuring surfaces clean after use, protect the instrument from coolant and direct sunlight, avoid impacts or drops, and check the zero position regularly. Periodic calibration should be scheduled according to your quality requirements.
How do I order the Mitutoyo 505-747 in Kuwait?
Pricing is quote-based. Call or WhatsApp +965 9807 4888 with the model number and required quantity, and General Tech Services LLC will confirm pricing and availability.
