Mitutoyo 2119AB-11 | Dial Gauge | Flat Back | ANSI/AGD Type | Jewelled Bearing | Graduation 0.001 mm | Range 5 mm
Part No. 2119AB-11 | Range 5 mm | Graduation 0.001 mm
General Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait +965 9807 4888
Product Overview
The Mitutoyo 2119AB-11 is an ANSI/AGD-type dial gauge with a flat back, 0.001 mm graduation and a 5 mm measuring range. Designed for high-resolution comparative inspection, it provides fine readings for checking small dimensional deviations, setting gauges and comparing precision components against a reference.
The ANSI/AGD design uses standard dimensions suited to compatible stands, fixtures and holders commonly used in inspection and machining environments. The flat back provides a clean, low-profile rear that is well suited to stem mounting in a magnetic base, comparator stand or custom fixture.
The 2119AB-11 uses jewelled bearings for smooth, sensitive pointer movement and is built to ANSI/AGD Type 2 standards. It also features a clear 0-10-0 dial, scratch-resistant anti-glare crystal and a carbide-tipped contact point for comparative inspection applications.
For bracket mounting with a lug back, the Mitutoyo 2119S-11 provides the corresponding lug-back configuration.
Key Benefits
■ 0.001 mm graduation for fine, micron-level comparative readings
■ 5 mm measuring range for precision inspection applications
■ ANSI/AGD design for compatibility with common stands, holders and accessories
■ Flat back for a clean profile when mounting by the stem
■ Jewelled bearings for smooth and sensitive pointer movement
■ 0-10-0 dial for direct comparative reading
■ Carbide-tipped contact point for inspection applications
■ Scratch-resistant, anti-glare crystal for clear dial viewing
■ Genuine Mitutoyo instrument supplied through General Tech Services LLC, Kuwait
Who This Product Is Best For
■ Quality-control inspectors requiring fine-resolution comparative measurement
■ Toolrooms and machine shops setting workpieces, fixtures and machine alignment
■ Maintenance teams replacing an existing ANSI/AGD flat-back gauge
■ Calibration and inspection departments standardising analogue gauges
■ Manufacturers checking precision-ground components and dimensional deviations
How to Use It
-
Mount the gauge securely by its stem in a rigid stand, magnetic base or suitable fixture.
-
Position the plunger squarely against the measurement surface or feature being inspected.
-
Apply a suitable amount of pre-travel and rotate the bezel to set the pointer to zero against the reference surface or master.
-
Move the workpiece or gauge across the feature while maintaining consistent contact.
-
Read the deviation directly from the 0-10-0 dial and use the 0.001 mm graduation for fine comparative measurements.
-
Retract the plunger gently after use and store the gauge clean, dry and protected.
Frequently Asked Questions
What is the Mitutoyo 2119AB-11 dial gauge used for?
The 2119AB-11 is used for precision comparative inspection, including checking precision-ground components, setting gauges and comparing dimensional deviations against a reference. Its 0.001 mm graduation provides fine-resolution readings over a 5 mm range.
What are the graduation and range of the 2119AB-11?
The Mitutoyo 2119AB-11 has a 0.001 mm graduation and a 5 mm measuring range.
What does ANSI/AGD mean on a dial gauge?
ANSI/AGD refers to the American Gage Design dimensions used for dial indicators. This design allows the gauge to work with compatible standard stands, holders and mounting accessories.
What is the benefit of a flat back?
The flat back provides a clean, compact rear profile that suits stem mounting in stands, magnetic bases and other compatible fixtures.
What are the dial reading and contact point type?
The 2119AB-11 has a 0-10-0 dial reading and a carbide-tipped contact point.
What are the stem and thread specifications?
The gauge has a 9.52 mm (0.375 inch) stem diameter and a 4-48UNF thread.
Which 2119 dial gauge should I choose?
The 2119AB-11, 2119A-11 and 2119S-11 share a 0.001 mm graduation and 5 mm range. The flat-back 2119AB-11 and 2119A-11 are suited to stem mounting, while the 2119S-11 provides a lug back for bracket or fixture mounting.
Is the genuine Mitutoyo 2119AB-11 available in Kuwait?
General Tech Services LLC supplies genuine Mitutoyo products in Kuwait. Contact +965 9807 4888 for current pricing and availability.
Request Pricing & Availability
For the Mitutoyo 2119AB-11, contact General Tech Services LLC for Kuwait pricing and availability.
Call +965 9807 4888 to request a quote.
