Mitutoyo 2910A-72 | Dial Gauge | Lug Back | ANSI/AGD Type | Series 2 | One Revolution | Jewelled Bearing | Graduation 0.0001 inch | Range 0.008 inch
Part No. 2910A-72 | Range 0.008 inch | Graduation 0.0001 inch
General Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait +965 9807 4888
Product Overview
The Mitutoyo 2910A-72 is an ANSI/AGD-type Series 2 dial gauge with a lug back, one-revolution dial, 0.0001 inch graduation and a 0.008 inch measuring range. It is designed for high-resolution comparative inspection where very small deviations need to be identified accurately.
The plunger-type gauge follows American Gage Design dimensions, making it suitable for inspection setups using compatible ANSI/AGD stands, fixtures and holders. Its 0.0001 inch graduation provides fine readings across the 0.008 inch measuring range for precision-ground parts, gauge setting and comparison against a master.
The lug back provides a dedicated rear mounting point for suitable brackets and fixtures. Its one-revolution dial displays the complete 0.008 inch range within a single pointer revolution, simplifying readings during comparative inspection. Jewelled bearings support smooth, low-friction pointer movement.
For a flat back version with the same 0.0001 inch graduation and 0.008 inch range, see the Mitutoyo 2910AB-10.
Key Benefits
■ 0.0001 inch graduation for fine, high-resolution comparative readings
■ 0.008 inch measuring range for precision inspection
■ ANSI/AGD-type Series 2 design for compatible inspection setups
■ Lug back for secure mounting to suitable brackets and fixtures
■ One-revolution dial displays the complete range in a single pointer turn
■ Jewelled bearings for smooth, low-friction movement
■ Genuine Mitutoyo product supplied locally in Kuwait
Who This Product Is Best For
■ Quality-control inspectors performing high-resolution comparative measurement
■ Toolrooms and machine shops checking precision-ground parts and setting gauges
■ Maintenance teams replacing an existing ANSI/AGD lug back dial gauge
■ Calibration and inspection teams standardising equipment on Mitutoyo
How to Use It
-
Mount the gauge using the lug back or stem on a rigid bracket, fixture or compatible stand, keeping the plunger square to the surface being measured.
-
Apply a small amount of preload and rotate the bezel to set the reference reading to zero.
-
Move the workpiece or gauge across the feature being inspected and read the pointer deviation directly from the dial.
-
Retract the plunger gently after measurement and store the gauge clean, dry and protected.
Frequently Asked Questions
What is the Mitutoyo 2910A-72 dial gauge used for?
The 2910A-72 is designed for high-resolution comparative inspection where very small deviations need to be identified. Its 0.0001 inch graduation and 0.008 inch range suit fine-tolerance inspection and comparison work.
What are the graduation and range of the 2910A-72?
The Mitutoyo 2910A-72 has a 0.0001 inch graduation and a 0.008 inch measuring range.
What does ANSI/AGD mean on a dial gauge?
ANSI/AGD refers to American Gage Design dimensions used for dial indicators. Compatibility should still be confirmed with the specific stand, holder or fixture used in your inspection setup.
What is the benefit of a lug back?
A lug back provides a dedicated rear mounting point, allowing the gauge to be secured to a suitable bracket or fixture.
What does a one-revolution dial mean?
The pointer covers the complete 0.008 inch measuring range in a single revolution. This makes the reading straightforward because the full range is displayed without needing to count multiple pointer revolutions.
What is the benefit of jewelled bearings?
Jewelled bearings support smooth, low-friction movement of the gauge mechanism, which is useful when making sensitive comparative measurements.
Should I choose the lug back 2910A-72 or the flat back 2910AB-10?
Both are listed with a 0.0001 inch graduation and 0.008 inch range. The 2910A-72 has a lug back, while the 2910AB-10 has a flat back, so the suitable version depends on the mounting arrangement of your inspection setup.
Is the genuine Mitutoyo 2910A-72 available in Kuwait?
Contact General Tech Services LLC at +965 9807 4888 for current pricing, lead time and availability in Kuwait.
Request Pricing & Availability
For genuine Mitutoyo 2910A-72 dial gauges in Kuwait, contact General Tech Services LLC at +965 9807 4888 for pricing, availability and ordering assistance.
