Mitutoyo 2910AB-10 | Dial Gauge | Flat Back | ANSI/AGD Type | Series 2 | One Revolution | Jewelled Bearing | Graduation 0.0001 inch | Range 0.008 inch
Part No. 2910AB-10 | Range 0.008 inch | Graduation 0.0001 inch
General Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait +965 9807 4888
Product Overview
The Mitutoyo 2910AB-10 is an ANSI/AGD-type Series 2 dial gauge with a flat back, one-revolution dial, 0.0001 inch graduation and a 0.008 inch measuring range. It is designed for high-resolution comparative inspection where very small deviations need to be identified.
The plunger-type gauge follows American Gage Design dimensions, making it suitable for compatible ANSI/AGD inspection stands, fixtures and holders. Its 0.0001 inch graduation provides fine readings across the 0.008 inch travel, making it suitable for checking precision-ground parts, setting gauges and comparing components against a master.
The flat back provides a clean rear profile for stem mounting in suitable magnetic bases, comparator stands or custom fixtures. The one-revolution dial displays the complete 0.008 inch range in a single pointer turn, simplifying readings during inspection. Jewelled bearings support smooth, low-friction movement.
For a lug back version with the same 0.0001 inch graduation and 0.008 inch range, see the Mitutoyo 2910A-72.
Key Benefits
■ 0.0001 inch graduation for fine, high-resolution comparative readings
■ 0.008 inch measuring range for precision inspection
■ ANSI/AGD-type Series 2 design for compatible inspection setups
■ Flat back for a clean profile when mounting by the stem
■ One-revolution dial displays the complete range in a single pointer turn
■ Jewelled bearings for smooth, low-friction movement
■ Genuine Mitutoyo product supplied locally in Kuwait
Who This Product Is Best For
■ Quality-control inspectors performing high-resolution comparative measurement
■ Toolrooms and machine shops checking precision-ground parts and setting gauges
■ Maintenance teams replacing an existing ANSI/AGD flat back dial gauge
■ Calibration and inspection teams standardising equipment on Mitutoyo
How to Use It
-
Mount the gauge by its stem in a rigid stand, magnetic base or suitable fixture, keeping the plunger square to the surface being measured.
-
Apply a small amount of preload and rotate the bezel to set the reference reading to zero.
-
Move the workpiece or gauge across the feature being inspected and read the pointer deviation directly from the dial.
-
Retract the plunger gently after measurement and store the gauge clean, dry and protected.
Frequently Asked Questions
What is the Mitutoyo 2910AB-10 dial gauge used for?
The 2910AB-10 is designed for high-resolution comparative inspection where very small deviations need to be identified. Its 0.0001 inch graduation and 0.008 inch range suit fine-tolerance inspection and comparison work.
What are the graduation and range of the 2910AB-10?
The Mitutoyo 2910AB-10 has a 0.0001 inch graduation and a 0.008 inch measuring range.
What does ANSI/AGD mean on a dial gauge?
ANSI/AGD refers to American Gage Design dimensions used for dial indicators. Compatibility should still be confirmed with the specific stand, holder or fixture used in your inspection setup.
What is the benefit of a flat back?
The flat back provides a clean, compact rear profile that suits stem mounting in compatible stands, magnetic bases and fixtures.
What does a one-revolution dial mean?
The pointer covers the complete 0.008 inch measuring range in a single revolution. This simplifies reading because the full range is displayed without needing to count multiple pointer revolutions.
What is the benefit of jewelled bearings?
Jewelled bearings support smooth, low-friction movement of the gauge mechanism, which is useful for sensitive comparative measurements.
Should I choose the flat back 2910AB-10 or the lug back 2910A-72?
Both are listed with a 0.0001 inch graduation and 0.008 inch range. The 2910AB-10 has a flat back for stem mounting, while the 2910A-72 has a lug back for suitable bracket or fixture mounting.
Is the genuine Mitutoyo 2910AB-10 available in Kuwait?
Contact General Tech Services LLC at +965 9807 4888 for current pricing, lead time and availability in Kuwait.
Request Pricing & Availability
For genuine Mitutoyo 2910AB-10 dial gauges in Kuwait, contact General Tech Services LLC at +965 9807 4888 for pricing, availability and ordering assistance.
