Mitutoyo 2928AB | Dial Gauge | Flat Back | ISO Type | Series 2 | One Revolution | Graduation 0.01mm | Range 4 mm
Part No. 2928AB | Range 4 mm | Graduation 0.01 mm
Product Overview
The Mitutoyo 2928AB is an ISO-type Series 2 dial gauge with a flat back design, one-revolution dial, 0.01 mm graduation, and 4 mm measuring range. It is designed for routine comparative checks, runout inspection, and setup work on the shop floor.
The gauge follows ISO-type design dimensions, so existing stands and holders should be checked for compatibility before installation. With 0.01 mm graduation over 4 mm of travel, it provides practical resolution for general inspection applications.
The flat back provides a clean, low-profile rear profile for applications where the gauge is held by its stem in a magnetic base, comparator stand, or custom fixture. Its one-revolution dial displays the full 4 mm range within a single pointer revolution, simplifying readings during repetitive inspection work. The mechanical movement is suited to regular day-to-day workshop use.
For a lug back version, see the Mitutoyo 2928A.
Key Benefits
-
0.01 mm graduation for clear, practical readings
-
4 mm measuring range for routine comparative inspection and setup
-
ISO-type design for applications using compatible ISO-pattern stands and holders
-
Flat back for a clean rear profile when mounting by the stem
-
One-revolution dial displays the complete range in a single turn
-
Mechanical movement for regular workshop use
-
Suitable for comparative checks, runout inspection, and setup applications
Who This Product Is Best For
-
Machinists and inspectors performing routine comparative checks and setup work
-
Toolrooms and machine shops checking workpieces, fixtures, and machine alignment
-
Maintenance teams replacing an existing ISO-type flat back dial gauge
-
Buyers standardizing inspection equipment with genuine Mitutoyo instruments
How to Use It
-
Mount the gauge securely by its stem in a rigid stand, magnetic base, or suitable fixture, keeping the plunger aligned with the surface being measured.
-
Pre-load the plunger slightly and set the dial to zero against a reference surface or master.
-
Move the workpiece or gauge across the feature and read the deviation directly from the dial.
-
Retract the plunger gently after measurement and store the gauge clean, dry, and protected.
Frequently Asked Questions
What is the Mitutoyo 2928AB dial gauge used for?
The Mitutoyo 2928AB is intended for routine comparative checks, runout inspection, and setup work. Its 0.01 mm graduation and 4 mm range are suited to general shop-floor inspection tasks.
What are the graduation and range of the 2928AB?
The Mitutoyo 2928AB has a 0.01 mm graduation and a 4 mm measuring range.
What does ISO type mean on this dial gauge?
The 2928AB is listed as an ISO-type dial gauge rather than an ANSI/AGD model. Check that the intended stands and holders are compatible with this design pattern before installation.
What is the benefit of a flat back?
The flat back provides a clean, low-profile rear design and is suitable for applications where the gauge is mounted by its stem in a stand, magnetic base, or fixture.
What does a one-revolution dial mean?
The pointer covers the gauge's full 4 mm range in a single revolution, allowing the complete measuring range to be read without counting multiple pointer revolutions.
Should I choose the flat back 2928AB or the lug back 2928A?
Both versions are listed with a 0.01 mm graduation and 4 mm range. The 2928AB has a flat back for stem mounting, while the 2928A provides a lug back mounting configuration. Confirm the mounting arrangement required for your existing setup before ordering.
Is the genuine Mitutoyo 2928AB available in Kuwait?
General Tech Services LLC supplies genuine Mitutoyo products in Kuwait. Contact +965 9807 4888 for current pricing, lead time, and stock availability.
For pricing and current availability of the Mitutoyo 2928AB, contact General Tech Services LLC, Genuine Mitutoyo Supplier, Kuwait, at +965 9807 4888.
