Mitutoyo 3052A-19 | Dial Gauge | Lug Back | ISO Type | Series 3 | Jewelled Bearing | Graduation 0.01 mm | Range 30 mm
Part No. 3052A-19 | Range 30 mm | Graduation 0.01 mm
General Tech Services LLC — Genuine Mitutoyo Distributor, Kuwait +965 9807 4888
Product Overview
The Mitutoyo 3052A-19 is an ISO-type Series 3 dial gauge with a lug back design, 0.01 mm graduation, 30 mm measuring range and jewelled bearings. It is designed for long-travel comparative measurement of heights, steps, runout and machine alignment.
The plunger-type gauge follows an ISO-type design, so compatible stands, holders and fixtures should be confirmed before installation. Its 0.01 mm graduation provides practical resolution across the 30 mm measuring range, allowing longer inspection movements to be completed without frequent gauge repositioning.
The lug back provides a fixed rear mounting point for securing the gauge to a compatible bracket, fixture or machine. Jewelled bearings support smooth, low-friction pointer movement during comparative measurement.
Key Benefits
-
0.01 mm graduation for clear, practical readings
-
30 mm measuring range for long-travel comparative inspection
-
ISO-type design for compatible inspection setups
-
Lug back for direct mounting to suitable brackets and fixtures
-
Jewelled bearings for smooth, low-friction movement
-
Series 3 configuration for long-travel measurement
-
Genuine Mitutoyo part supplied by General Tech Services LLC in Kuwait
Who This Product Is Best For
-
Inspectors measuring heights, steps, runout and machine alignment over longer travel
-
Toolrooms and machine shops checking workpieces, fixtures and machinery
-
Maintenance teams replacing an existing ISO-type lug back dial gauge
-
Calibration and quality-control teams standardising inspection equipment on Mitutoyo
How to Use It
-
Mount the gauge securely using its lug back or suitable stem mounting arrangement on a rigid bracket, stand or fixture, with the plunger correctly aligned to the measuring surface.
-
Pre-load the plunger slightly against a reference surface or master and rotate the bezel to establish the required zero position.
-
Move the workpiece or gauge across the feature being inspected and read the deviation directly from the dial.
-
Keep the plunger movement within the 30 mm measuring range and avoid excessive measuring force.
-
Retract the plunger gently after use and store the gauge clean, dry and protected.
Frequently Asked Questions
What is the Mitutoyo 3052A-19 dial gauge used for?
The Mitutoyo 3052A-19 is designed for long-travel comparative measurement of heights, steps, runout and machine alignment. Its 0.01 mm graduation and 30 mm measuring range suit longer inspection movements.
What are the graduation and range of the 3052A-19?
The Mitutoyo 3052A-19 has a 0.01 mm graduation and a 30 mm measuring range.
What does ISO-type mean on this dial gauge?
ISO-type indicates that the gauge follows an ISO-type design rather than an ANSI/AGD pattern. Check that your existing stands, holders and fixtures are compatible with this design before installation.
What is the benefit of a lug back?
The lug back provides a fixed rear mounting point for securing the gauge to a compatible bracket or fixture. This is useful where direct lug mounting is preferred over stem clamping.
What is the benefit of jewelled bearings?
Jewelled bearings help reduce internal friction, supporting smooth and sensitive pointer movement during comparative measurement.
What is the difference between the 3052A-19 and 3047A?
The 3052A-19 is listed with a 0.01 mm graduation and 30 mm measuring range, while the 3047A is listed with a 0.01 mm graduation and 10 mm range. The appropriate model depends on the required measuring travel.
Is the genuine Mitutoyo 3052A-19 available in Kuwait?
Contact General Tech Services LLC at +965 9807 4888 for current pricing, lead time and availability in Kuwait.
Request Pricing & Availability
For the genuine Mitutoyo 3052A-19 in Kuwait, contact General Tech Services LLC at +965 9807 4888 to request pricing and current availability.
